Melitta Aroma Elegance Therm DeLuxe Filter Coffee Machine Instruction Manual

Melitta Aroma Elegance Therm DeLuxe Filter Coffee Machine

Operating Instructions

• A. START/Aroma Control button
• B. DECALC/HARDNESS button
• C. TIMER button
• D. H (hours)/M (minutes) buttons
• E. Display
• F. recessed area to remove water tank
• G. water level display
• H. water tank lid
• I. handle to open the swivel filter
• J. drip stop

Dear customer,
Thank you for buying our Melitta® coffee grinder Melitta Molino®. We hope you will be very happy with it.
If you need further information or if you have any questions please contact Melitta® or visit us on the Internet at www.melitta.co.uk

For your safety
The appliance complies with all valid European guidelines.
The appliance complies with all valid United Kingdom guidelines.
The appliance has been tested and certified by an independent test institute.
Please read the safety notes and the operating manual in full. To avoid danger you must pay attention to the safety and operating instructions. Melitta® is not liable for damage caused by ignoring these instructions.

Safety notice

This appliance is intended for use in households and similar areas, such as –

• in kitchens for employees in shops, offices and other commercial areas
• in agricultural establishments
• in motels, hotels and other residential facilities and bed and breakfast establishments

Any other use is considered to be improper use and may result in personal injury or damage to property. Melitta® is not liable for damage caused by improper use.

Please observe the following instructions to avoid injuries in case of misuse:

• The appliance must not be placed in a cupboard during operation.

• Connect the appliance only to a properly installed earthed socket.

• The appliance must always be disconnected from the power supply when unsupervised and before assembly, disassembly or cleaning.

• During operation, parts of the appliance such as the steam out-let at the filter become very hot. Avoid touching these parts and avoid contact with hot steam.

• Do not open the filter holder during brewing.

• The hotplate becomes very hot during use and remains hot for a long time after the brewing process. Contact with the hot plate can cause burns, so avoid touching it.

• Make sure that the power cable does not touch the hot plate.

• Do not use the appliance if the power cable is damaged.

• Do not allow the power cable to come into contact with liquids.

• Never immerse the appliance in water.

• Do not use the jug in the micro-wave
  Do not clean the parts that come into contact with food with aggressive cleaning agents or scouring cream. Remove detergent residues with clean water. Further information on cleaning can be found under “Cleaning and care”.

• This appliance can be used by children from 8 years of age or older if they are supervised or have been instructed in the safe use of the equipment and have understood the potential hazards. Cleaning and maintenance must not be carried out by children,
  unless they are 8 years or older and are supervised. Keep the appliance and the power cable away from children under 8 years of age.

Hardness setting| I| II| III| IV|
---|---|---|---|---|---
°dH| <7° dH| 7-14° dH| 14-21° dH| >21° dH|
ONLY AromaElegance ®: LED flash rhythm (DECALC/HARDNESS button )| …⬛……⬛…| …⬛⬛……⬛⬛…| …⬛⬛⬛……⬛⬛⬛…| …⬛⬛⬛……⬛⬛⬛⬛…|
ONLY AromaElegance ® DeLuxe: Display| 1| 2| 3| 4|

Table 1

• The appliance may be used by persons with reduced physical, sensory or mental abilities or lack of experience and/or know-ledge if they are supervised or have been instructed in the safe use of the appliance and have understood the potential hazards.
• Children must not play with the appliance
• Replacement of the power cable and all other repairs may only be carried out by Melitta® Customer Service or by an authorized repair shop.

Before first use

• Ensure that the power supply in your home corresponds to that on the model plate on the base of the appliance.

• Connect the appliance to a power source. Unused cable can be stored in the base of the appliance a.

• Only Melitta® AromaElegance® DeLuxe:
  Set the current time using the H and M buttons b. This goes faster if you hold down the button. The appliance is only ready for use after setting the time. By simultaneously holding down the H and M buttons b for longer than two seconds, you can turn the display light on or off.

• All appliances have been tested during production to ensure they work perfectly. Therefore there may be for example water deposits remaining. Rinse the appliance twice with the maximum amount of water and without a filter bag or ground coffee, in order to clean it.

• For the best coffee enjoyment and convenient use, the appliance is equipped with various features. These features are explained below.

Set water hardness

Depending on water hardness lime scale may build up in the appliance. This increases the appliance’s energy consumption as lime scale on the heating element can prevent the water heating effectively. To avoid damage the appliance must be descaled regularly. The descaling display helps you with this c. If the red LED is permanently lit this shows that the appliance needs to be descaled (see point 6).
The appliance is pre-set for a high level of water hardness (level 4). You can find out the level of water hardness in your area by asking your local water provider or by using water hardness measuring strips available in the shops. For softer water the descaling display can be adjusted to descale less often:

Melitta® AromaElegance®

• Hold down the DECALC/HARDNESS button c for longer than two seconds. The red LED will start to flash. In the factory settings the LED flashes four times with the following pauses (…⬛⬛⬛⬛⬛…).
• You can set the water hardness at three other levels. By briefly pressing the DECALC/HARDNESS but-ton c the display changes to flashing briefly once, twice or three times, each time followed by a pause (…⬛⬛⬛… ,⬛⬛… ,…⬛…).
• The settings and display are shown in table 1.
• Once you have set the desired level of water hardness, hold down the DECALC/HARDNESS button c again for longer than two seconds.
  The red LED will go off and your settings are saved.

Melitta® AromaElegance® DeLuxe

• Hold down the DECALC/HARDNESS button c and by briefly pressing the M button b set the desired level of water hardness. The hardness level will be shown in the display.
• Once you have set the desired level of hardness let go of the DECALC/HARDNESS button c. Your settings are now saved.

Please note:

• Water hardness cannot be programmed while brewing.
• The last water hardness level chosen remains even after removing the power cable.

Setting the hotplate (ONLY Melitta® AromaElegance® DeLuxe)

Keeping coffee warm on the hotplate affects the taste of your coffee. To avoid this you should enjoy your coffee fresh, by drinking it as soon after brewing as possible. Unnecessary warming also uses valuable energy. The factory settings for the appliance are for 40 minutes of warming. After this the hotplate turns off automatically. This time can be changed as needed:

• Simultaneously hold down the START button d and the TIMER button e and by briefly pressing the M button b set the desired warming time (20, 40 or 60 minutes). The current warming time is shown in the display.
• Once you have set the desired warming time let go of the button. Your setting is now saved.
• The last setting chosen remains even after removing the power cable.

Making coffee

For aromatic coffee flavour and the best fit for your filter bag in the filter holder, we recommend using Melitta® filter bag 1×4®.

Brewing coffee

• Ensure that the appliance is connected to a power source.

• Remove the detachable water tank by holding the recessed grip and pulling straight up f.

• Remove the water tank lid and fill with the desired amount of fresh water from the tap. Using the water level indicator on the tank you can choose the correct number of cups.
  Small cup symbol = approx. 85ml coffee per cup, large cup symbol = approx. 125 ml coffee per cup f.

• Close the tank by replacing the lid and insert the tank back in the appliance. Please ensure that you replace the tank upright in the appliance. The guide rails on the appliance (left of the tank) will help you with this g.

• Swivel the filter to the right and remove it from
  the holder h. You can now conveniently rest the filter on your kitchen worktop.

• Fold a Melitta® filter bag 1×4® at the embossed seams and place in the filter holder. Press the filter bag into the filter holder by hand, to ensure the best fit i.

• Put the ground coffee into the filter bag. The amount depends on your personal taste. We recommend using 6 g of ground coffee per large cup.
  Put the filter back into its holder. For this hang first the eyelet of the filter on the top of the swivel arm and afterwards press the round base into the clip. An audible click tells you it is inserted properly j.

• Swivel the filter back into the appliance and place the glass pot with closed lid in the appliance k.

• Turn the appliance on d. The green LED lights up and brewing begins.

• To fully develop the flavor of your coffee even when preparing less than 6 cups, the Melitta® Aroma Elegance® models are fitted with the Aroma Control feature as standard. So even when preparing small quantities of coffee you get the best aromatic coffee experience. When making 2-5 cups press the START but-ton d for longer than two seconds. The green LED flashes and brewing begins.

• After making the coffee the hotplate keeps it warm and turns off automatically after the time you have set (see point 4). This avoids the unnecessary use of electricity and saves energy. You can of course turn the appliance off manually at any time. The drip stop prevents your coffee from dripping, when you remove the pot from the appliance l. With the help of the detachable filter you can dis-pose of the coffee filter bag simply and easily h.

Timer feature (ONLY Melitta® Aroma Elegance® Deluxe)

The appliance is fitted with a timer. This allows you to set a time at which brewing will automatically begin.

• Prepare the appliance as described in point 5.1. brewing coffee, but without pressing the START button.
• To set the desired start time hold down the TIMER button e and press the H and M buttons b repeatedly to set the desired start time. This goes faster if you hold down the H and M buttons. The first time you programmed it, the display will show 00:00.
• After letting go of the TIMER button, the current time will show. The chosen start time is saved until you set a different time or remove the appliance from the power source.
• By briefly pressing the TIMER button again, the timer feature is activated for the next brewing process. To show this, the white LED e lights up and the programmed start time shows briefly in the display.
• If you wish to activate the Aroma Control for the programmed brewing, then press the START button d for longer than two seconds. Now as well as the white LED, a green LED d will light up.
• The appliance automatically starts to make the coffee at the time you have set.
• By pressing the TIMER button again, the timer feature can be deactivated at any time. The white LED goes off e.
• If you want to make coffee before the programmed start time then press the START button d. The timer feature will then be deactivated.

Cleaning and maintenance

External cleaning

• The housing can be cleaned with a soft damp cloth.
• The glass pot and lid, the filter insert and the swivel filter can be washed in the dishwasher.
• When cold, the hotplate can be cleaned with a soft damp cloth.

Descaling
Based on the water hardness level you have set (see point 3) the descaling programme should be run promptly after the DECALC/HARDNESS button c lights up. The descaling programme is only available when the descaling display lights up.

• Follow the manufacturers instructions regarding amounts and pour the descale into the water tank. We recommend using Melitta® “Anti Calc Liquid for Filter Coffee & Aqua Machines“.

• Briefly press the DECALC/HARDNESS button c. The red LED begins to flash. In the display the word “CALC” flashes
  (ONLY Melitta® Aroma Elegance® Deluxe).

• The descaling process will run automatically, it takes about 25 minutes.

• Attention: Only by carrying out the descaling process completely, all limescale deposits will be removed and the red light on the DECALC/HARD-NESS button will go off. The descaling process should therefore not be interrupted before it has run for the full 25 minutes.

• After the descaling process is completed the DECALC/HARDNESS button light will go off. The appliance will turn off automatically and go into stand-by mode.

• At the end of the descaling process, the appliance should be rinsed twice through, using the maximum amount of water without coffee, in order to completely remove any remaining limescale deposits.

Notes on disposal

• Appliances labelled with this symbol are subject to European guidelines for WEEE (Waste Electrical and Electronic Equipment).
• Electric appliances do not go in the household bin. Dispose of the appliance in an environmentally friendly way using suitable collection systems.
• Packaging materials are raw materials and can be recycled. Please recycle them.

Terms of guarantee

In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by Melitta® due to his consulting competence, we grant a manufacturer´s guarantee under the following conditions:

1. The guarantee period begins with the day the product was sold to the end user. The guarantee is 24 months. The purchase date of the device must be verified by a purchase receipt.
   The device was designed and built for household use only. It is not dedicated for a commercial use. Guarantee performances lead neither to an extension of the guarantee period nor to a new beginning of the guarantee period for the device or installed spare parts.

2. Within the guarantee period we will correct all device defects that are based on material or manufacturing errors, through repair or replacement of the device at our discretion. Replace parts become the property of Melitta®.

3. Defects that occurred due to improper connection, improper handling, or repair attempts by nonauthorized persons are not covered by the guarantee. The same applies for failure to comply with the use, care, and maintenance instructions as well for the use of consumables (e.g. cleaning and decalcifying agents or water filters) that do not correspond to the original specifications. Wear parts (e.g. seals and valves) and fragile parts like glass are excluded from the guaran-tee.

4. Guarantee performances are processed via the Service Hotlines for the respective country (see information below).

5. These guarantee conditions apply for devices purchased and used in UK If devices are purchased in foreign countries or brought into foreign countries, then guarantee performances will only be provided as specified in the guarantee conditions applicable for this country.

Melitta UK Ltd.
Hortonwood 45
Telford, Shropshire, TF1 7FA United Kingdom
Tel: +44(0)800 0288002 www.melitta.co.uk

References

• Melitta ® Online Shop
• Servis elektroniky, opravy elektrospotřebičů, elektro servis - BELS cz s.r.o.
• Melitta® Online Shop
• Passionate About Coffee | Melitta®
• Melitta ® Online Shop
• Melitta® Online Shop
• Cafeteras automáticas, de goteo y accesorios para café | Melitta®
• Melitta® Boutique en ligne
• Melitta® Online Shop
• Melitta® Online Shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>