LENA LIGHTING Surface Mounted Luminaire Baris 52 LED Single Instruction Manual
- June 4, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING Surface Mounted Luminaire Baris 52 LED Single
We would like to inform you that our products are marked in accordance with the European Directive 2002/96/CE and the Polish Act on used electric and electronic equipment with a Sign of a crossed-out waste container:
MODELS
- Baris 52 LED N Single
- Baris 52 LED Z Single
POWER OFF
DIMENSION
INSTALLATIONS
POWER ON
- Assembly should be carried out by a qualified person.
- The light source used in this luminaire should only be replaced by the manufacturer or his maintenance representative, or a similarly qualified person.
- Dirtiness that settles down on the diffuser due to normal operation or the sitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
VD VERSION ONLY
The luminaire is intended for indoor traffic zones included in table 5.1 of
the EN12464 standard.
We would like to inform you that our products are marked in accordance With the European Directive 2002/96/LE and Polish Act on used electric and electronic equipment with a Sign of a crossed-out waste container:
Baris 52 LED Z Single
POWER OFF
DIMENSION
PARTS
INSTALLATIONS
POWER ON
- Provide basic insulation between the LV supply and control wires
- Classification of the insulation maintained between the LV supply and the control wires – basic insulation
- In order to avoid risk, if the external flexible cord is damaged, it should only be replaced by the manufacturer or its service agent, or a similarly qualified person.
- Assembly should be carried out by a qualified person.
- Dirtiness that settles down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
- The light source used in this luminaire should only be replaced by the manufacturer or his maintenance representative, or a similarly qualified person.
References
Read User Manual Online (PDF format)
Loading......