Ashdown Engineering Pro-FX Compact Sub Harmonic Generator Double Shot Pro Drive User Guide
- June 9, 2024
- Ashdown Engineering
Table of Contents
ABM
PRO – FX COMPACT
SUB HARMONIC GENERATOR
DOUBLE SHOT
PRO DRIVE
USER GUIDE
THANK YOU!
FOR PURCHASING YOUR NEW PRO FX PEDAL
ASHDOWN ENGINEERING – PRO FX
INTRODUCTION
The PRO FX Compact 9 volt range of effects pedals designed for guitarists and bass players by guitarists and bass players.
Designed and Engineered in the UK with Electronics Engineer Dave Green, Dave has been part of the team at Ashdown since around 2006 and has been behind many of our new products in terms of electronic design.
This range of pedals has been months in development and are some of our best sounding pedals we have ever designed.
Taking from what we have learned from the market we wanted an affordable range of pedals distinctive in looks but most importantly characterful in tone and features.
SUB HARMONIC GENERATOR:
Our SUB Harmonic Generator is simple and effective, with blend-able subs/cleans you can add a subtle fatness or go full out synth.
Specifications:
– Sub Harmonics – Set the amount of sub signal effect you require
– Clean – Set the or blend the clean siganl of the bass
– True Bypass switching
– 100mA draw
– 9 volt – Power Supply (Not Included)
Weight & Dimensions:
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
DOUBLE SHOT:
A variation on our Triple Shot the double shot is a two band variable drive pedal designed for bass players.
Specifications:
– Dark – controls the Bass
– Light – controls the Treble
– Roast – sets the amount of gain to its corresponding EQ band
– True Bypass switching
– 50mA draw
– 9 volt – Power Supply (Not Included)
Weight & Dimensions:
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
PRO DRIVE:
A straight forward Bass Overdrive with a tone control and volume with the an adjustable gain control from a little grit to screaming sqaure waves.
Specifications:
– Gain – Set the deired amount of Gain
– Output – Set the overall output volume of the pedal
– Tone – Set the tone, from thick to thin
– True Bypass switching
– 50mA draw
– 9 volt – Power Supply (Not Included)
Weight & Dimensions:
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>