Paris Rhône PE-AH033 Top-Fill Ultrasonic Cool Mist Humidifier User Manual

Paris Rhône PE-AH033 Top-Fill Ultrasonic Cool Mist Humidifier User Manual

TOP-FILL ULTRASONIC COOL MIST HUMIDIFIER

PE-AH033

Safety Instructions

Warning: Please be aware of the following points otherwise you might in danger if high voltage charges or but your body.

1.  Never disassembly the base unit without consult qualified personnel.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
3. Do not change attachment without definite permit from our company otherwise you might catch hazard.
4. Any abnormal smell during normal operation, please switch off and disconnect power supply and want qualified personnel amend.
5. Always trun off or unplug before removing, filling or emptying the water tank.
6. Keep detergents, chemical solutions away children.
7. Cleaning with clear water when detergents & chemical solutions splash into mouth & eyes, consulting doctors against serious hazard.
8. Never touch water in the Water Tank & components in the water when the unit is in working.
9. Never switch on when there is no water in the water tank.
10. Never scrape Ultrasonic Atomizing Transducer at will.
11. Never clean Ultrasonic Atomizing Transducer with detergents, chemical solutions, etc.
12. Never let water splash into inner Base Unit when cleaning for avoiding components damage.
13. Never move the machine with the full water tank.
14. Posit the unit on the even surface and keep the machine at least 2 meters far away from the furniture and the other electrical appliances.
15. Care should be taken due to emission of hot vapor.
16. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
18. Only use water in the tank, never use any additive such as essential oils, etc. into the tank.

Specifications

Rated Voltage: AC 100-240V-50/60E1a
Rated Power: 20W
Water Tank Volume: 6L
Mist Wine: 300±30m1/H
Operating temperature: 5-400
Noise Level: < 35 dB (A)

Operation Instruction

• Use clear water not over 400.
• Check the water basin, make sure it is clear.

Operation steps:

1. Take the water tank cap out of the base, revolve the tank-cap by the directions of UNLOCK and LOCK, and fill the water tank with clear water. Close the tank-cap.

2. Put the nozzle into the socket on top of the humidifier.
3. Connect the adapter, switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN WATER TANK), the LED display will on for 2 seconds then be off. The unit stands by.

4. : Press Power Button, the power indicator will light up white, indicating the humidifier has been turned on (medium mist level). Press again to turn it off.
5. : When the unit is on, press the Mist Button to adjust the mist among Low/ Medium/High levels.
6. : When the mist is on, press the Timer Button to cycle through 2 H -> 4 H -> 8 H.
7. : When the unit stands by or turns on:

1. Press the Night Light Button/ Sleep Button once to turn on the night light in water tank.
2. Press it again to turn off the night light in water tank.

When the unit turns on:

1. Hold the button for 3 seconds to enter sleep mode, All the indicators are off. Press any button to activate Sleep mode. All the other buttons remain functional.
2. Hold the button for 3 seconds again to exit sleep mode.
3. When there is no enough water inside the water tank under Sleep Mode, the humidifier will turn off automatically.

Low Water Protection

When there is not enough water inside the water tank, the humidifier will stop misting and Low Water Protection will be activated (Waterless lamp flashes in red with BEEP sound for 3 times). Then the humidifier will turn off automatically. It is designed for safety to prevent the humidifier from possibly overheating and damaging the atomizer.

Troubleshooting

hours in cool position
Dirty water or residue water| Cleaning water tank, fill in clear water
Mist fog is too small| Too much scale in the water basin| Clean transducer
Dirty water or residue water| Clean water tank, change to fresh clear water
Water is too cold| Add some warm water inside
Abnormal noise| Resonant in water tank when water is too lower| Fill water tank with water
Unit is on a unstable surface| Move the unit to a stable flat surface
Mist coming out around the nozzle| There are apertures between the nozzle and water tank| Dip the nozzle in water for a while and then fix it to the socket on water tank

Maintenance

We recommend:

1. Use cold boiled water or distilled water.
2. Clean the transducer, water tank and main unit every week.
3. Change the water in water tank more often to keep it fresh.
4. Make sure to pull out the water from the water tank and dry the whole unit before you idle the unit for a long period of time.
5. Do not use the chemical for cleaning.

How to clean the transducer:

1. Put 5-10 drops of plain white vinegar on the surface of the transducer, wait for 2-5 minutes;
2. Brush out the scale on the surface.
3. Rinse the transducer with clean water.

How to clean the basin unit:

When there is not enough water inside the water tank, the humidifier will stop misting and Low Water Protection will be activated (Waterless lamp flashes in red with BEEP sound for 3 times). Then the humidifier will turn off automatically. It is designed for safety to prevent the humidifier from possibly overheating and damaging the atomizer.

DOWNLOAD

Paris Rhône PE-AH033 Top-Fill Ultrasonic Cool Mist Humidifier User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>