attwood 6100-AT-7 PowerBase Antenna Instructions
- June 9, 2024
- attwood
Table of Contents
attwood 6100-AT-7 PowerBase Antenna Instructions
REQUIRED FOR INSTALLATION (NOT INCLUDED):
- 7/32” & 3/4” Drill Bits
-
2 Phillips Driver
- Marine Grade Sealant
- PTFE Lubricant
- 2x 1-1/4” Fender Washers and 10-24 Nuts (If Through-Hole Mounting)
- 2-Position SPST Switch (with LED Backlight)
- PowerBase Antenna: Compatible with most single-mount point antennas up to 8ft in length (1”-14 Threaded)
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>