gosund SL1-B Smart Light Strip Instructions

SL1-B Smart Light Strip Instructions

Parts Included

1 Light Strip
1 Controller
1 User Manual

Controller Overview

On/Off/Pairing Mode
Short press the button to turn on and off the light strip.
Long press the button for more than 8 seconds to reset the light strip to pairing mode.
Brightness Adjustment
Short press the button to adjust the brightness of the light strip.

Color Switch/Music Mode
Short press the button to change colors.
Long press the button for more than 5 seconds to switch the light strip to music mode.

Specification

Model: SL1-B
Input: 5V=1A
Color Model: RGB
Working Temperature: -20°C-45°C (-4°F-113°F)

How to Download the App

1. Search for “Gosund” in the Apple APP Store or Google Play.
2. Scan the QR code below to enter the download page.

https://smartapp.tuya.com/gosundsmart

How to Pair with the App

1. Open the APP and create your account.
2. Turn on the light strip and put it close to the router when pairing.
3. There are two ways you can add a device.
   One way is to tap “+” on the upper right corner and select “Auto Scan” when your phone is Bluetooth enabled.
   The second way is to tap “+” on the upper right corner to select “Add Manually”, and then select “Strip Light(Wi-Fi)”.
   Follow the App instructions to complete the operation

Before You Start

1. Install the light strip after it is connected to the APP successfully.
2. It is not safe to hang down the controller. Fix and stick it on the surface once the light strip was installed.
3. Make sure the TV’s USB port supports a 5V/1A device. If not, you might need an extra adapter for your light strip.

Installation Steps

1. Clean and dry surface before application. You can use any cleaner that will not leave a film or oily surface. We recommend using alcohol prep pads.

2. Peel tape from light strip and press firmly into place.

3. When it comes to a corner, please refer to the method shown in the figure. Adhesive reaches maximum strength after 24 hours.

4. Choose a proper installation method according to the size of your TV.
   3 SIDES 4 SIDES

5. When connecting the light strip to the controller, make sure to plug it into the correct side.

Please note:
Light strip plugged into a TV will turn on and off with the TV only on models that cut off power to the USB port when the TV is turned off.
Some TVs leave the USB port on when the TV is off. Other TVs turn the USB port on and off every 10 seconds when the TV is turned off (Sony Bravia, for example).

Main Features

Warnings

Important!
Do not use this product in humid environments or outdoors.
Do not place this product near heating devices, such as microwave ovens, stoves, or radiators.
Protect the product from extreme temperature-es, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors and solvents.
Do not disassemble, modify, or repair your device, and ask help from the authorized professionals for device malfunction.
Do not store the device for extended periods in poor ambient conditions.
Never use aggressive detergents rubbing alcohol or other chemical solutions as these could damage the casing or even impair the functioning of the product.
Note: The image shown in the manual is indicative only. If there is inconsistent between the image and the actual product, the actual product shall govern.

MADE IN CHINA
4.02.000.0766 V1.0

Documents / Resources

| gosund SL1-B Smart Light Strip [pdf] Instructions
SL1-B Smart Light Strip, SL1-B, Smart Light Strip, Light Strip, Strip
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>