ATOLL ELECTRONIQUE AV500 5 Channel Power Amplifier Owner’s Manual
- June 9, 2024
- ATOLL ELECTRONIQUE
Table of Contents
AV500 5 Channel Power Amplifier
Owner’s Manual
AV500 5 Channel Power Amplifier
You have just bought an amplifier with exceptional audiophile performance. We
really thank you for your confidence in ourproducts. To get the best part of
your amplifier, please read carefully this manual.
YOU WILL FIND ENCLOSED
- A 5 channel power amplifier.
- One power lead.
- This manual with the certificate of guarantee.
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your amplifier in a dry and well-ventilated place, far from a source of heat.
- Avoid putting something on your amplifier.
- Strictly respect polarity + & , as well as the left and right connections.
- Avoid any short-cut.
- Do not plug-in two speakers in parallel on the same output.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this timelapse.
- Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- Your amplifier is equipped with a temporized switch on. A relay protects loudspeakers on the output power stage from over-voltage.
-
Center output. 7) Rear left IN/OUT. - Rear left output.| 8) Rear right IN/OUT.
- Rear right output.| 9) Front left IN/OUT.
- Front left output.| 10) Front right IN/OUT.
- Front right output.| 11) Power plug and switch (with fuse).
- Center IN/OUT.| 12) Power indicator led.
Example of wiring with 1 PR5.1 and 1 AV500 powering 5 speakers. It is possible
to do bi-amplification from an audio/video preamp and 2 AV500s (1 AV500 for
the treble, the other for the bass). In this case, use the cinch outputs of
the 1st AV500 to feed the 2nd AV500. E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE, and national transpositions.
WARRANTY CONDITIONS
The guarantee is two years long from the date of purchase. We recommend you to
ask your dealer to fill the guarantee and to conserve it. The guarantee is
only available for appliances that have been used correctly.
MAINTENANCE
Before any cleaning, switch off your device. Use a soft and dry rag to clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product containing an abrasive agent. Never try to clean up inside the appliance.
TECHNICAL DATA
| Power Wrms/ch./8 Ω (230v): | 5×85 W / 2×100 W |
|---|---|
| Power Wrms/ch./4 Ω (230v): | 5×100 W / 2×140 W |
| Power supply: | 2×340 VA |
| Total of capacitors: | 73 000 µF |
| Number of Inputs: | 2×5 |
| Input Impedance: | 47 kΩ |
| Sensitivity: | from 1,58 V to 1,77 V |
| Signal/Noise rate: | 100 dB |
| Distortion at 1kHz: | 0,05 % (10 W) |
| Frequency Response: | 5 Hz – 200 kHz |
| Rising Time: | 1,3 µs |
| Dimensions: | 440×291×95 mm |
| Weight: | 12 Kg |
WARRANTY FORM ~ AV500 MODEL
To present to your dealer with the invoice when returning back the appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Date of purchase:…
Place of purchase:……
Buyer signature:…….
ATOLL ELECTRONIQUE®
is a French Company that designs, manufactures, and commercializes all its
products.