Nintendo Switch Joy-con Controller Pair Instruction Manual

Nintendo Switch Joy-con Controller Pair

Caution

Parents/Guardians: Please read the following information carefully.

Warning

• This product contains small Keep away from children under 3 years old.
• Keep this product away from small children or Seek medical attention immediately if any small parts are swallowed.
• Keep the product away from dusty or humid
• Do not place this product near heat sources or leave it under direct sunlight for an extended period. Overheating may cause malfunction.
• Do not apply strong impact or weight on the
• Do not place anything on top of this
• Do not use this product if it has been damaged or
• Do not disassemble, modify or attempt to repair this
• If the product needs cleaning, use only a soft dry Do not use any chemical agents like benzene or thinner.
• Do not use this product for anything other than it’s intended We are not responsible for any accidents or damages in the event of use other than the intended purpose.

Warning or the Joy-Con Charge Stand

• Pulling on the cable may cause the Nintendo Switch™ or Joy-Con Charge Stand to fall, which may cause injuries.
• Discontinue use if you notice unusual heat, smoke, noise, or smell coming off of the product.
• Do not place an unstable
• Do not get this product This may cause an electric shock or malfunction.
• Do not cover the product Doing so may cause overheating.
• Do not put water or foreign substances inside this Doing so may cause fire, electric shock, or malfunction.
• Do not get this product This may cause an electric shock or malfunction.
• Do not use this product when there is a risk of a lightning storm to avoid fire, electric shock, or malfunction.
• Please do not use too much force when connecting or disconnecting the product from the Nintendo Switch Dock.
• Please check that the connectors are clean before If the product needs cleaning, use a soft dry cloth only.
• Check the connector direction before inserting.
• Do not touch the metal parts of the USB plug.
• Do not use the USB plug when it’s covered with dust.
• Do not modify or damage the cables as this may cause a fire or electric shock.
• Do not twist or bundle the cables.
• Do not pull roughly or bend the cable of the product.
• When not in use or while cleaning, please disconnect this product from the Nintendo Switch.

Warnings for the Joy-Con Covers

・JoyCon Grip
・JoyCon Charging Grip
・JoyCon Wheel ・Nintendo Joy-Con AA Battery Pack

• If this product is damaged, never put the broken pieces in your mouth as you may Please keep away from children 3 years or younger as this is a choking hazard.
• Do not carry or hold on to just the cover when it is attached to the Joy-Con as it may cause damage.
• Please be careful when attaching and detaching the Joy-Con Covers as excessive force may cause damage.
• Please be sure to clean the Joy-Con before attaching this product.
• This product is not Please do not get the Joy-Con wet while attached.
• If this product gets dirty, please clean it with mild detergent and a damp cloth.
• This product is not made to protect the Nintendo Switch system from impact.

This product cannot be attached when using the below accessories.

Include

This product does not include the Joy-Con controllers.

Platform

Nintendo Switch

Important

• Before using this product with the Nintendo Switch, please read the following instructions carefully.
• Please check that your Nintendo Switch is updated to the latest system firmware.

How to use the Joy-Con Charge Stand

Layout

How to Connect

Turn off the Nintendo Switch and firmly connect the USB to the dock .

• Do not connect the USB to anything other than the dock as it may cause a malfunction.
• This product is intended to be charged through the Nintendo Switch dock. We are not responsible for any problems caused by connecting this product to other devices.

Charge

• Slide the Joy-Con to the bottom of the rail.
• The upper LED will turn red when charging.
• The LED will turn off when charging is complete.

Charging Time

• For 1 ～ 2 controllers: 3.5 hours
• For 3 ～ 4 controllers: 7 hours

Charging times may vary

• Do not forcibly attach or detach the Joy-Con controllers.
• Do not attach the Joy-Con controllers upside down.
• Please remove the Joy-Con strap before charging.

About the Protection Circuit

This product includes a built-in protection circuit. When the protection circuit activates, a red LED will blink and stop the product from charging. When the product is in this state unplug it and inspect it to see if it is damaged or overheating.  If you cannot determine the issue, please stop using the product and contact HORI customer support.

Cover

Attach the Joy-Con Covers

Please attach the Top and Bottom Covers as shown in the diagram below .

Push the covers together until you hear a Click sound.

Remove the Joy-Con Covers

As shown in the figure below, gently push the corner of the Bottom Cover in the same direction as the arrows.

Note: Please do not forcefully detach the product as it may cause damage .

Main Features

Joy-Con Charge Stand

• External Dimensions: 120 × 66 × 122mm
• Weight: 160g
• Cable Length: 0.6m
• Charging Time: For 1～2 controllers: 3.5 hours /For 3～4 controllers: 7 hours

Charging time is approximate, Charging time varies

Cover (L/R)

• External Dimensions: 35 × 104mm × 24mm
• Weight: 12g

THE FCC WANTS YOU TO KNOW

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. EU and Turkey only

PRODUCT DISPOSAL INFORMATION

Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste. Applicable to EU countries and Turkey only. The normal function of the product may be disturbed by strong electromagnetic interference. If so, simply reset the product to resume normal operation by following the instruction manual (How to connect). In case the function does not resume, please relocate to an area that does not have electromagnetic interference to use the product. The wires are not to be inserted into socket outlets. The packaging must be retained since it contains important information.

Warranty

US Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects in material and workmanship for a period of 90 days from the original date of purchase. If the warranty claim cannot be processed through the original retailer please contact HORI customer support directly at infous@hori.jp. Please visit http://stores.horiusa.com/policies/ for warranty details.

EU Warranty
For all warranty claims made within the first 30 days after purchase, please check with the retailer where the original purchase was made for details. If the warranty claim cannot be processed through the original retailer or for any other inquiries pertaining to our products, please contact HORI customer support directly at infoeu@hori.jp.

FAQ’s

How many Joy-Cons can you simultaneously attach to a switch?

You can pair up to eight controllers with your Nintendo Switch system at once, regardless of the type of controller (Joy-Con, Nintendo Switch Pro Controller, etc.).

Can different Joy-Cons be paired together?

The Nintendo Switch gaming system can be used with up to eight wireless controllers. The maximum number of controllers that can be connected will change depending on the features and the type of controllers being utilized.

How many people can use Joy-Con at once?

With the integrated Joy-Con, you can play some games for up to two players (one controller per person). For multiplayer games with three or more people, you can also purchase additional controllers.

How long does it take to charge a Joy-Con?

Joy-Con controllers require around three and a half hours to charge completely.

How long are Joy-Cons good for?

The most popular and reasonably priced item produced by Raycon is Everyday Earbuds. Suitable for daily use, earphones have a battery life of up to 6 hours for audio playback and up to 32 hours in the charging case for making and receiving calls.

Can you use a Joy-Con separately?

Two people can play with just one pair of Joy-Cons by registering both the left and right Joy-Cons.

Is Joy-Cons Bluetooth capable?

Actually, Joy-Con is two controllers working together. Because these tiny controllers use Bluetooth to connect to Switch, you can also use Switch controllers on your PC to play your preferred indie game or emulator.

Do you require two Joy-Con sets?

No, unless the game specifically calls for complete controls. whether the game is compatible with horizontal controls, such as Mario Kart 8 Deluxe.

Why can I only connect one of my Joy-Cons?

Snap both controllers back into position to firmly reattach them to the console. Try disconnecting and rejoining the controllers once more if this doesn’t work. Try adding an alternative controller, if you can, to determine if the one you’re using is broken if the controllers still won’t connect.

How far can you throw a Joy-Con?

Most of the time, relocating these gadgets three to four feet (1–1.5 meters) away from the Nintendo Switch console and/or Joy-Con controllers will be sufficient.

I need how many Joy-Cons.

The Joy-Con controllers that come with the Switch are either neon (blue on the left, red on the right) or grey. Although each one may serve as a standalone gamepad, you’ll need a second pair of controllers for multiplayer games like Arms, which will set you back a significant sum of money.

Is it possible to utilize a phone as a Joy-Con?

You must download the JoyCon Doid app on your phone in order to use it as a Nintendo Switch keyboard and controller.

Are Joycons remotely rechargeable?

Using Powercast’s PowerSpot wireless transmitter, wireless charging grips for Nintendo Switch Joy-Con Controllers charge when they are two feet away from it without the use of wires, plugs, or charging mats.

When in Sleep Mode, do Joycons charge?

The Nintendo Switch system must be connected to the AC adapter, turned on, or in sleep mode in order for the Joy-Con to charge while they are connected to it.

How can you tell when Joy-Con has finished charging?

The recharge Light on the Charging Grip will remain lit while the Joy-Con controllers are recharging. The recharge LED will turn off when they are fully charged.

How can I test my joy battery’s condition?

Under “Controllers” on the HOME Menu, you can see how much battery life your linked controllers still have.

Download this PDF Link:Nintendo Switch Joy-con Controller Pair Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>