audio technica AT6901BR Spike Base Insulator User Manual

AT6901BR / AT6902BR / AT6901ST / AT6902ST
User Manual / Spike Insulator / Spike Base Insulator

AT6901BR Spike Base Insulator

Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

• Do not leave the product on the floor. Doing so could result in an injury or accident.
• Keep the product out of the reach of small children to avoid injuries or accidents.
• Do not place the product on an unstable location. Doing so could cause associated devices to fall and be damaged or cause injury.
• Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Doing so could cause deformation or defects.
• Do not disassemble or modify the product. Doing so could cause damage or deformation.
• Do not subject the product to strong impact. Doing so could cause damage or deformation.

Notes on use

• Do not use for audio devices that are equipped with a turntable or a storage medium. Records could be scratched or the music data could be lost due to even a slight tilt at installation.
• Do not use outdoors.
• When the product is used for a long time, it may become discolored due to ultraviolet light (especially direct sunlight) and wear.
• Do not place the product on easily scratched materials, such as marble or unfinished wood.
• Placing the product on soft material may leave impressions in the material, due to the weight. Use the product on a surface that is stable and as hard as possible.
• Do not use the product for speakers, such as tallboy-type speakers, which may become unstable when used with the product. Be sure to read the user manual for the speaker before use.
• Place the product on a flat, level, and stable surface, and avoid placing it on carpets.
• The bottom surface of the product is slippery, so it is easier to position. Be careful when positioning it.
• Always use the Spike Base Insulators (AT6902BR/AT6902ST) and avoid using just the Spike Insulators (AT6901BR/AT6901ST).
• Be careful when positioning the cone-shaped spike protrusions so that they do not stab anything except the cone-shaped dimples of the spike bases. The tips of the spike protrusions could scratch the products or surfaces on which they are being used.
• The load may cause the surface processing of the spike base dimples to peel off or deform.

Care

• Use a dry cloth to clean the product.
• Do not use alcohol, paint thinners or other solvents for cleaning purposes.
• For long-term storage, keep the product in a well-ventilated place without high temperatures and humidity.

Using the product

A greater insulating effect can be achieved by using the Spike Insulators (AT6901BR/AT6901ST) together with the Spike Base Insulators (AT6902BR/AT6902ST).

1. Place the product on a flat, level, and stable surface.
   • Place the cone-shaped spike protrusion of the Spike Insulator (AT6901BR/AT6901ST) so it fits into the cone-shaped dimple of the Spike Base Insulator (AT6902BR/AT6902ST). We recommend using the Spike Insulator on top of the Spike Base Insulator.

2. Place a speaker on top of the product and then adjust the insulators so the load is evenly distributed and there is no wobble.
   • The diagram is an example installation. In addition to the example, change the installation according to the device you are using, such as placing two at the front and one at the back of a speaker.
   • Install the insulators so the load is balanced, and not centered on a single insulator.
   • Forcefully scraping the product against a speaker or installation surface may cause scratches.

Specifications

AT6901BR
Quantity: 6
Material: Machined brass (gold plated)
Dimensions: Diameter 25 mm (0.98”) × 12.5 mm (0.49”) (including protrusions)
Height: 18 mm (0.71”) (when combined with AT6902BR/AT6902ST)
Weight: Approx. 28 g (0.99 oz) (1 piece)
Load capacity: 21 kg (46 lbs) (for 3-point support), 7 kg (15 lbs) (per 1 piece)

AT6902BR
Quantity: 6
Material: Machined brass (gold plated)
Dimensions: Diameter 25 mm (0.98”) × 7.5 mm (0.30”)
Height: 18 mm (0.71”) (when combined with AT6901BR/AT6901ST)
Weight: Approx. 25 g (0.88 oz) (1 piece)
Load capacity: 21 kg (46 lbs) (for 3-point support), 7 kg (15 lbs) (per 1 piece)

AT6901ST
Quantity: 6
Material: Machined stainless steel
Dimensions: Diameter 25 mm (0.98”) × 12.5 mm (0.49”) (including protrusions)
Height: 18 mm (0.71”) (when combined with AT6902BR/AT6902ST)
Weight: Approx. 28 g (0.99 oz) (1 piece)
Load capacity: 21 kg (46 lbs) (for 3-point support), 7 kg (15 lbs) (per 1 piece)

AT6902ST
Quantity: 6
Material: Machined stainless steel
Dimensions: Diameter 25 mm (0.98”) × 7.5 mm (0.30”)
Height: 18 mm (0.71”) (when combined with AT6901BR/AT6901ST)
Weight: Approx. 25 g (0.88 oz) (1 piece)
Load capacity: 21 kg (46 lbs) (for 3-point support), 7 kg (15 lbs) (per 1 piece)
For product improvement, the product is subject to modification without notice.

152304051-01-01
ver.1 2022.02.01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>