SOUNDPEATS T3 Earbuds Active Noise Cancelling User Manual

: June 9, 2024
: SoundPEATS

Table of Contents

SOUNDPEATS T3 Earbuds Active Noise Cancelling
First Time of Using
Wearing methods
Product Diagram
Control
Q&A
Warranty Conditions
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOUNDPEATS T3 Earbuds Active Noise Cancelling

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

First Time of Using

Open the cover of the charging case, take out the two earphones, remove the insulation film on them separately, and then put both earphones back into the charging case. By this time, the left and right earphones will automatically enter the TWS mutual pairing state. After successful mutual pairing, the blue light in the right earphone will flash slowly and the bule light in the left earphones will always be on, and the two earphones will enter the pairing mode.
Then go to Bluetooth settings of your device and choose SOUNDPEATS T3.

Reset

Clear the pairing data from your device.
Take out the two earphones from the charging case, press and hold the multifunction buttons for 10s until the blue indicator lights in both earphones flash for three times and then go out. At this time, the earphones are off, and then press and hold the multifunction buttons of both earphones again for 10s until the blue indicator lights flash twice, and the reset is completed.
Place the earbuds back into the charging case and close the case lid, waiting for seconds, and then open it again. The earphones are activated successfully.

Wearing methods

Identify the left earphones and the right earphone.
Adjust the earphones to fit your ears.

Product Diagram

Control

Power On| Auto: Open the charging case

Manually: Press and hold the multifunctional button for

1.5s

---|---
Power Off| Auto: Place the earbuds back into the charging case and close the case lid

Manually: Press and hold the multifunction button for 10s

Play/Pause| Double-tap on the multifunction button
Volume –| Single tap on the left multifunction
Volume +| Single tap on the right multifunction
Next Track| Press and hold the right multifunction button for 1.5s
Answer/Hang Up a

Phone Call

| Double-tap on the multifunction button
Reject a Phone Call| Press and hold the multifunction button for 1.5s
Switch Between Two

Activate Calls

| Press and hold multifunction button for 1.5s
Manual Pairing| Take out the two earphones from the charging case while they are connected to your device, and then press and

hold the multifunction buttons for 6.

Activate the Voice

Assistant

| Press the multifunction button for three times
ANC/Transparency

mode

| Press and hold the left multifunctional button for 1.5s

Q&A

Q1: What does the indicator of the charging case display?

The battery life of charging case:
- 100%-50% Green
- 49%-10% Yellow
- < 10% Red
Charging status of the charging case:
- < 10% Stay on Red
- 11%-49% Stay on Yellow
- 50%-99% Stay on Green
- 100% Off

Q2: How to charge the charging case?

Connect the charging case to a Type-C charger. (The current does not exceed 1A)
If the earphones stay idle for an extended period of time, charge them at least every three months to prevent the battery from being damaged.

Q3: Why are the earphones still connected to the phone when they are put back to the charging case and the case lid is closed?

Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
Make sure the headphones are properly placed in the charging case and the charging metal sheet and PIN are both clean. And wiping clean the contact points on the earphones and the charging case should fix this issue.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440

Subject of the declaration:

Title: Wireless earbuds
Model / Type: T3

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.