ufesa CE7244 Breccia 20 Espresso Coffee Machine Instruction Manual
- June 9, 2024
- UFESA
Table of Contents
ufesa CE7244 Breccia 20 Espresso Coffee Machine
WE WOULD LIKE TO THANKS YOU FOR CHOOSING UFESA, WE WISH THE PRODUCT PERFORMS
TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE USE THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE
DESCRIPTION
- Connection light
- Temperature ready
- On/off button
- Coffee cup / hot water button
- Steam button
- Control knob
- Water tank
- Water tank cover
- Drip tray
- Steam wand
- Frothing nozzle
- Measuring spoon and tamper
- Funnel handle
- Press bar (press steel mesh with it when pour coffee residue to avoid its slipping out)
- Metal funnel
- Stainless steel mesh
- Temperature meter
SAFETY INSTRUCTIONS
If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. This appliance is intended to be used in household. It is not intended to be use in applications such as
- staff kitchen areas in shops, ofices and other working environments,
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
Proceed according to maintenance and cleaning section of this manual for cleaning Never immerse the appliance in water or any other liquid. Appliance is only to be used with the stand provided During brewing and after use due to residual heat some parts of the machine are hot. Warning: potential injury from misuse!
This device is designed for use at a maximum altitude up to 2000m above sea level
IMPORTANT WARNINGS
Any incorrect use or improper handling of the product shall render the
warranty null and void. Prior to plugging in the product, check that your
mains voltage is the same as the one indicated on the product label Ihe mains
connection cable must not be tangled or wrapped around the product during USe.
Do not use the device, or connect and disconnect to the supply mains with the
hands and / or feet wet. Do not pull on the connection cord in order to unplug
it or use it as a handle. Never use your coffee machine without water in it
Unplug the product immediately from the mains in the event of any breakdown or
damage and contact an official technical support service. In order to prevent
any risk of danger, do not open the device. Only qualified technical personnel
from the brand’s Official technical support service may carry out repairs or
procedures on the device.
B &.B Trends, S.L.
disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Before use Make sure that all the product’s pac kaging has been removed. Before making coffee tfor the fhirst time, we recommend using the coffee maker twice with water only, in order to clean the system. The appliance will be turned off after 25 minutes If you want continue using the appliance, please press the “on/off” button (2) to switch the appliance on, then you can use the appliance normally.
Filing with water
The water tank {/) must be hulled with water before turning the appliance on.
Remove the detachable tank, open its cover (8) and fill the tank. Never fill
beyond the level “MAX”. Close the cover. Replace the tank into the appliance
properly.
Pre heating
To make a cup of good hot espresso coffee, we recommend you preheating the
appliance before making coffee, including the funnel, mesh and cup, so that
the coffee flavor cannot be influenced by the cold parts.Select the one cup or
two cup mesh and place it (without adding coffee) into the metal funnel (15).
Pull the press bar backward and make sure that the funnel aligns with the
groove in the water outlet. Then insert the funnel into the water outlet from
the “Insert” position and fix it firmly by turning it counterclockwise until
it is at the “lock” position (hig1). Place a cup on the removable shelf. Make
sure that the control knob (6) is at the “OFF” position. Connect the appliance
to the power supply. Press the on/off button (5), the connecting light will on
and the machine starts to warm up. Once the ready light on, the machine is
ready to use Press the “coffee cup/ hot water” button, hot water will flow out
through the funnel to the cup. After a time, when you consider that the parts
are already pre-heated, press again the coffee button to stop the water flow.
Make Espresso
Coffee Add ground coffee to the steel mesh with the measuring spoon. Then
press the grounded coffee tightly with the tamper. A spoon of grounded coffee
can make about a cup of top-grade coffee. Pul the press bar backwards and
place the corresponding steel mesh for one or two cups into the metal funnel
Make sure that the funnel aligns with the groove in the water outlet. Insert
the funnel into the water outlet from the “Tnsert” position and tx it firmly
by turning it counterclockwise until it is at the “lock” position Fig1). Place
a cup on the removable shelf. Press the coffee button to prepare coffee as
needed. The working time for brewing single-cup of coffee is 60 seconds at
most, and the water pump will stop working if the working time exceeds 60
seconds. Warning: Do not leave the coffee maker unattended during making
coffee while operating. After finishing making the coffee, take the metal
funnel out by turning it clockwise, and then pour the coffee residue out with
the steel mesh pressed by the press bar. Let them cool down completely, then
rinse under running water.
Frothing milk/ Making Cappuccino
You get a cup of cappuccino when you top up a cup of espresso with frothing
milk. Prepare espresso first with according to the “MAKE ESPRESSO COFFEE”
section. Press the steam switch selector, the lamp in the coffee switch will
be illuminated, wait until the indicator in the steam switch selector is
illuminated.
Note: During operation, the indicator in the steam selector will cycle on and off to maintain to desired temperature. Fill a jug with about 100 ml of milk for each cappuccino to be prepared. You are recommended to use whole milk at refrigerator or room temperature (not hot!).
Note: it is recommended that the diameter of the jug is not less than 70:5mm, and bear in mind that the milk increases in volume by 2 times, make sure the height of jug is enough. lurn the steam control knob slowly anti- clockwise, steam will come out from frothing device
Note: Never turn the steam knob rapidly, as the steam will accumulate rapidly in short time which may increase the potential of the risk of spillage. When the frothing operation is finished, turn the steam knob to the min position.
Note: Clean the frothing nozzle with a wet sponge immediately after steam stops generating, but caree not to hurt! Pour the frothed milk into the espresso prepared. Now the cappuccino is ready. Sweeten to taste and if desired, sprinkle the froth with a little cocoa powder. Press the on/off” button to switch the appliance off and turn the steam control knob to “o “position.
Note: we recommend to allow the coffee maker to cool down at least for 5 min before making coffee again. Otherwise burnt odor may occur in yOur espresso coffee.
Producing hot water
With this function, you can pre-heat your coffee cup to ensure that the
temperature of the coffee will not decrease. So as to improve the coffee
flavor. Clean your coffee cup. After drinking coffee, you can directly make
hot water with this coffee maker to clean the cups. Ihis makes it more simple
and convenient to clean the cups. When the preheating is finished, the coffee
indicator lights up solidly. Then press the coffee switch, and the water pump
starts to pump water. Turn the knob to “Hot water, and then hot water will fow
out of the steam pipe. To stop making hot water, press the coffee switch
again. Hot water is Used for warming cup, making tea or cooling down the
appliance. Please refer to the operation described in the section of “Make
ESPRESsO” when need to adjust the working time for making hot water.
Note: At first the hot water will scatter from the steam wand. May let the steam wand outlet close to the coffee cup wall Ihus at this moment, you need to pay attention to the protection of hot water splash burns skin.
Producing steam to heat liquids
Make sure that the control knob is at the “OFF position. Press the “on/off”
button to switch the appliance on. The connection light, will on. Press the
steam button. Wait until the ready light on. Dip the wand into the liquid to
be heated. Turn the steam knob slowly anti-clockwise. Steam will come out from
the wand. When the desired temperature is reached, turn the steam knob to the
min position and press again the steam button. Press button “on/off” button to
switch the appliance oft.
MAINTENANCE AND CLEANING
Do not forget to remove the plug from the socket before cleaning the appliance. Wipe outside with soft dry cloth when coffee machine is wet, never use metal polish. The removable items should be washed in hot soapy water. Rinse them before fixing Detach the metal funnel through turn it anticlockwise, get rid of coffee residue inside, then you can clean it with cleanser, but at last yoU must rinse with clear water. Never use a dishwasher to clean any parts from the machine. Put the coffee maker in a dry and not very hot place.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead goin8 to the electrical and electronic waste collection centre closest to your home.
WARRANTY REPORT
B&B TRENDS, SL. guarantees compliance of this product, for the use for which it is, during the period established by the legislation in force in the country of sale. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfil or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been Used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorized by B & B TRENDS, SL. The warranty will not cover any parts subject to wear and tear This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.
USE OF WARRANTY
Customers must contact a B&B TRENDS, SL, authorized Technical Service for repair of the product. Since any tampering of the same by anyone not authorized by B&B TRENDS, SL., or the careless or improper use of the same shall render this warranty null and void. You must keep the purchase invoice, receipt or delivery docket in order to exercise your warranty rights. For technical service and after-sales care outside the Spanish territory, please submit your query to the point of sale where vow purchased the item.
SERVICIOS DE ATENCION TECNICA (SAT) TECHNICAL ASSITANCE SERVICE (TAS), SERVIÇO DE ATENÇAO TÉCNICA (SAT) SERVICE TECHNIQUE (ST), SERVIZIO DI ASSISTENZA TECNICA (SDAT) (+34) 93 560 67 05 sat@bbtrends.es B&B TRENDS, S.L. C Catalunia, 24 PL Ca NOller 08130 Santa Perpètua de Mogoda (Barcelona) España CIF. B-86880473 www.bbtrendses Consulte el SAT autorizado más cercano en https://sat.ufesa.com/ Check out your nearest service station at https://sat.ufesa.com/
B&B TRENDS, S.L. · C.I.F. B-86880473
C. Cataluña, 24 P.I. Ca N’Oller 08130
Santa Perpètua de Mogoda (Barcelona) · España
www.bbtrends.es
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>