ufesa CE7240 Espresso Machine Instruction Manual

June 9, 2024
UFESA

ufesa logo

CE7240 Espresso Machine
Instruction Manualufesa CE7240 Espresso Machine cafetera expresso
CE7240

CE7240 Espresso Machine

ufesa CE7240 Espresso Machine - figufesa CE7240
Espresso Machine - fig1

WE WOULD LIKE TO THANK YOU FOR CHOOSING UFESA; WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

  1. Coffee +ON/OFF
  2. Coffee/hot water selector
  3. Steam +switch
  4. Drip tray
  5. Removable shelf
  6. Steam control knob
  7. Water tank cover
  8. Water tank
  9. Top cover
  10.  Steam wand
  11. Froth device
  12. Main body
  13. Bottom cover
  14. Stainless Steel mesh
  15. Measuring spoon and tamper
  16. Metal funnel
  17.  Funnel handle
  18. Press bar (press steel mesh with it when pour coffee residue to avoid its slipping out)

SAFETY INSTRUCTIONS

If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if  they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or  instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
This appliance is intended to be used in household. It is not intended to be used in applications such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments.
Proceed according to maintenance and cleaning section of this manual for cleaning.
Never immerse the appliance in water or any other liquid.
During brewing and after use due to residual heat some parts of the machine are hot.
Warning: potential injury from misuse!

IMPORTANT WARNINGS
Any incorrect use or improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle
Never use your coffee machine without water in it.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an official technical support service. In order to prevent any risk of  danger, do not open the device. Only qualified technical personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B &B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

INSTRUCTIONS FOR USE

Before use
Make sure that all the product’s packaging has been removed.
Before making coffee for the first time, we recommend using the coffee maker twice with water only, in order to clean the system.
Filling with water
The deposit must be filled with water before turning the appliance on.
Lift the lid
Fill the compartment with cold water.
Fill the tank observing the MAX and MIN levels Close the lid.
PRE-HEATING
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before making coffee, including the funnel, filter and cup, so that the coffee flavour  can not be influenced by the cold parts.
Remove the detachable tank and open the tank cover to fill it with desired water, the water level should not exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
Select the one-cup or two–cup mesh, set stainless steel mesh into metal funnel, pull the press bar backward, make sure the tube on the funnel aligns with groove in the  appliance, then insert the funnel into the appliance from the “Insert” position and release the press bar, and you can fix them into coffee maker firmly through turn it  anticlockwise until it is at the “lock” position. (Fig. 1).
Place an espresso cup on removable shelf.
Then connecting the appliance to power supply source, make sure the steam control knob is on the “OFF” or “0” position.
Press the “Coffee+ON/OFF” switch, the “Coffee +ON/OFF” indication lamp flashing. Then wait until the indicator light keeps on. Press the “Coffee/hot water selector”,  there is water flowing out, close the pump (pressing coffee/hot water selector button) immediately. The purpose of the step is that pump the water of the tank into the housing.
When the “Coffee +ON/OFF” indicator light keeps on, you should press the “Coffee/hot water selector” button, there will be hot water flowing out. When the “Coffee  +ON/OFF” indicator light flashing, close the pump. The pre- heating was finished.
MAKE ESPRESSO COFFEE
Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh with measuring spoon, a spoon ground coffee power can make about a cup of top- grade  coffee, then press the ground coffee powder tightly with the tamper.
Set steel mesh into metal funnel, pull the press bar backward, make sure the tube on the funnel aligns with groove in the appliance, then insert the funnel into the appliance from the “Insert” position and release the press bar, and you can fix them into coffee maker firmly through turn it anticlockwise until it is at the “lock” position. (Fig. 1).
Pour out the hot water in the cup. Then place the hot cup on removable shelf.
At the time, the green lamp is illuminated, if the green lamp is extinguished, wait for a moment, once the green lamp is illuminated, and you should press the coffee/hot water  selector on the “1” position, waiting for a moment, there will be coffee flowing out.
Note: During operation, if the green indicator is extinguished, you must close the pump and stop to make espresso coffee. After a few seconds, if the green lamp is  illuminated again, you can make espresso coffee continued by pressing coffee/hot water selector to “1” position, the green lamp is cycle ON and OFF to maintain the water  temperature is hot enough.
You should press coffee/hot water selector to “0” position manually when desired coffee is obtained or the colour of coffee changes weak obviously, the red and green  indicator go out and the coffee maker stops working, your coffee is ready now.
WARNING: Do not leave the coffee maker unattended during making the coffee, as you need operate manually sometimes!
After finishing making the coffee, you can take the metal funnel out through turn anticlockwise, and then pour the coffee residue out with the steel mesh pressed by press bar.
Let them cool down completely, then rinse under running water.

FROTHING MILK/ MAKING CAPPUCCINO
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Method:
Prepare espresso first with container big enough according to the part “MAKE ESPRESSO COFFEE”, make sure that the steam control knob is at the “OFF” or “0” position.
Press steam+switch button, wait for a moment, until the steam+switch indication light change from flashing from to keeps on.
Note: During operation, if the green indicator is extinguished, you should turn the steam control knob to “OFF” or “0” position. Press coffee/hot water selector to the “1”  position and pump water, after about 30s, close the pump coffee/hot water selector to the “0” position), then wait for until the green indicator is illuminated and turn the  steam control knob in anticlockwise, the steam will come out again.
Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you are recommended to use whole milk at refrigerator or room temperature (not hot!).
Note: In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and bear in mind that the milk increases in volume by 2 times, make sure the height of jug is enough.
Turn the steam control knob slowly in anti-clockwise, steam will come out from the frothing device.
Note: Never turn the steam control button rapidly, as the steam will accumulate rapidly in short time which may increase the potential of the risk of explosion.
Insert the frothing device into the milk about two centimetre, froth milk in the way moving vessel round from up to down.
When the required purpose is reached, you can turn the steam control knob to “OFF” or “0” position.
Note: Clean steam outlet with wet sponge immediately after steam stops generating, but care not to hurt!
Pour the frothed milk into the espresso prepared; now the cappuccino is ready. Sweeten to taste and if desired, sprinkle the froth with a little cocoa powder.
Press the ON/OFF switch to the “0” position to cut the power source off.
Note: we recommend you allow the maker to cool down at least for 5 min before making coffee again.
Otherwise burnt odor may occur in your Espresso coffee.

MAKING HOT WATER:

  1. With this function, you can pre-heat your coffee cup to ensure that the temperature of the coffee will not decrease. So as to improve the coffee flavor.
  2. Clean your coffee cup. After drinking coffee, you can directly make hot water with this coffee maker to clean the cups. This makes it more simple and convenient to clean the cups.

Methods:

  1. Press the On/Off switch to the “1” position; the Steam switch to “0” position, Coffee/hot water selector to “0” position. The red lamp will be illuminated; waiting for a  moment, the green lamp will be illuminated.
  2. First, turn the steam control knob from “OFF” to “0” position in anti-clockwise. (Turn the knob with at least 135 degree.) Then press coffee/hot water selector to “1”  position, and hot water will flow out from the steam wand.
    Note: At first the hot water will scatter from the steam wand. May let the steam wand outlet close to the coffee cup wall. Thus at this moment, you need to pay attention to  the protection of hot water splash burns skin.

PRODUCING STEAM TO HEAT LIQUIDS
The steam wand (without the frothing device) can be used to make hot beverages like drinking chocolate, water or tea.
Method:
Open the tank cover, remove the detachable tank and fill it with desired water, the water level should not exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
Replace the tank, then connecting the appliance to power supply source.
Press the ON/OFF switch to the “1” position, the red lamp is illuminated.
Turn the steam control knob to “OFF” or “0” position, make the coffee/hot water selector on the “1” position, the pump will pump water, when there is water flowing out,  close the pump (coffee/hot water selector to the “0” position) immediately, pressing the steam selector to the “1” position and waiting for a moment, the appliance begins to  be heated until the green lamp is illuminated, it shows the heating is finish.
Remove the frothing device from the steam wand.
Dip the steam wand into the liquid to be heated. Turn the steam control knob in anti-clockwise slowly to start making steam.
When the required temperature is reached, you can turn the steam control knob to “OFF” or “0” position.
Press the ON/OFF switch to the “0” position to cut the power source off.

MAINTENANCE AND CLEANING

  1. Do not forget to remove the plug from the socket before cleaning the appliance.
  2. Wipe outside with soft dry cloth when coffee machine is wet, never use metal polish.
  3. The removable items should be washed in hot soapy water. Rinse them before fixing.
  4. Detach the metal funnel through turn it anticlockwise, get rid of coffee residue inside, then you can clean it with cleanser, but at last you must rinse with clear water.
  5. Never use a dishwasher to clean any parts from the machine.
  6. Put the coffee maker in a dry and not very hot place.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides  the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead  going to the electrical and electronic waste collection centre closest to your home.

ALAVA
01012 VITORIA
REPARACIONES BERNA
DOMINGO BELTRAN, 54
945 248 198
bernaabetxuko@yahoo.es| 33900 SAMA DE LANGREO
ALGA NALON, S.L.
TORRE DE ABAJO, 8
985692242
alganalon@yahoo.es| 08950 ESPLUGUES DE LLOBREGAT
SAT J. BAUTISTA
SANTIAGO RUSIÑOL, 27-29 LOCAL 5
933722157
satdireccion@satjbautista.com
---|---|---
01001 VITORIA
AREA GLOBAL
OLAGIBEL, 48
945128200
choni@area-global.com
romesa@area-global.com| AVILA
05005 AVILA
CUCHILLERIA ANDRES
SAN PEDRO BAUTISTA Nº 1
920 22 00 14
reparandres@gmail.com| 08015 BARCELONA
SAT DORVEN,S.L.
DIPUTACION, 53
934243703
casensi@satdorven.com
ALBACETE
2003 ALBACETE
V. CAMACHO
C/ PEDRO COCA, 50 LOCAL
967 22 45 54
jcamachosat@gmail.com| 5003 AVILA
Antonio San Segundo Gómez
(G.R. Goli Reparaciones)
C/SORIA, 6
920257815/606759754
imsatavila@gmail.com| 08700 IGUALADA
SAT CUADRAS
SANT DOMENEC, 9-11
938045431
assumpta@satcuadras.com
2004 ALBACETE
ELECTRICIDAD FRESNEDA S.L.
C/ Blasco Ibañez n’ 13 Bajo
967231467
satfresneda@gmail.com| BADAJOZ
6002 BADAJOZ
ELECTRONICA MIRANDA, S.L.
RAMON ALBARRAN, 17
924207428
emirandasl@yahoo.es| 08921 STA. COLOMA DE
SANZ SAT, S.L.
PRAT DE LA RIBA, 62
934 681 945
sanzsat@gmail.com
ALICANTE
03800 ALCOY
SERT-TALLER DE ELECTRONICA
CID,12
965331412
serttv@gmail.com| 6700 VILLANUEVA DE LA SERENA
ARFET,C.B.
HERNAN CORTES, 76-B
924841195
comercial@arfet.es| 08030 BARCELONA
RICARDO GUEVARA GARCIA (RIGUÉ)
Ps. TORRAS I BAGES 50-58
933469902
reparacionesrigue@gmail.com
3204 ELCHE
REP. PEQUEÑOS ELECTROD. S.U.R.L
CONRADO DEL CAMPO 8
965425112
pascual.selva@gmail.com| BARCELONA
08015 BARCELONA
SUM. ELECT. DALMAU, S.C.P.
VILADOMAT, 108
934539276
sdalmau@ono.com| 08401 GRANOLLERS
REP. ELECTRICAS SALVADO, S.L.
CARLES RIBA,5
938494073
salvado@salvadosl.com
03181 TORREVIEJA
ANTHONY ALLEN ASHMORE RODRIGUEZ
(ELECT.MONTESINOS)
C/ORIHUELA,
43 966703505
e.montesinos2012@yahoo.es| 08240 MANRESA
SERVICIO ELDE – JORGE MANERO
BRUCH, 55
938728542
elde@eldeservei.com| 8160 MONTMELO
RAMON ARCOS PLANAS (electrosat)
JOSEP TARRADELLAS, 2 LOCAL II
935720130
elite-electrosat@telefonica.net
ALMERIA
04867 MACAEL
ELECTRO JUAN MOLINA SL
AVDA. ANDALUCIA, 6
950 445 529
juanmolina@electrodomesticosjuanmolina.es| 08027 BARCELONA
SELAROM
PASSEIG MARAGALL, 102
933 521 805
amoralesnieto@hotmail.com| 08025 BARCELONA
KLEIN GERATE, C.
ROGER DE FLOR, 330
932137764
imma.klein@grupelde.com
ASTURIAS
33003 OVIEDO
TALLER AMABLE
SAN JOSE, 12 B
985223739
satamable@telecable.es| 08020 BARCELONA
SAT MARINE, S.C.P.
C/HUELVA, 67-69
932664697
satmarine@satmarinescp.com| 08025 BARCELONA
JOSE ANTONIO FUSTER GARCIA
PROVENZA 538-540
934564736
fuster_garcia@hotmail.com
8720 VILAFRANCA DEL PENEDES
FRED VILAFRANCA, S.L
POL.INDR.”DOMENYS I” NAVE 9
938904852
fred@fredvilafranca.com| 08620 SANT VICENÇ DELS HORTS
SAT JARO C/
MALAGA,
20-22 647 054 779
jroca78@gmail.com| 08211 CASTELLAR DEL VALLES
JOAN ANTON JUAREZ
CATALUNYA, 90 BAJO
937146275
jajuarez@juarez.com.es
08720 VILAFRANCA DEL PENEDES
FRED VILAFRANCA S.L.
PROGRES, 42
938904852
fred@fredvilafranca.com| CADIZ
11402 JEREZ DE LA FR
ELECTRO LARA
C. DIVINA PASTORA EDIF. 2 LOCAL 6
956 336 254
electrolara@eresmas.com| CUENCA
16400 TARANCON
DOMINGO SANTAOLALLA MEJIA
P.I. TARANCON SUR C/ SANCHO
PANZA 9
969322036/667607788
marisolsanta1981@hotmail.com 
08226 TERRASSA
ELECTRO CERDAN, S.L.
HISTORIADOR CARDUS, 71
937354105
electrocerdan@cecot.es| 11007 CADIZ
ANA PATIÑO CHACON (TECNI-HOGAR)
TOLOSA
LATOUR
19 956281082
tecnihogarcadiz@hotmail.com| GIJON
33209 GIJON
TALLER ELECTRICO SEYSA, S.L.
LOS ANGELES, 10-12
985388146
tallerseysa@gmail.es
08226 TERRASSA
ELECTRO CERDAN, S.L.
HISTORIADOR CARDUS, 71
937354105
electrocerdan@cecot.es| CANTABRIA
39008 SANTANDER
TELEC – CANTABRIA
TRES DE NOVIEMBRE, 1 -B
942371757
telecantabria@yahoo.es| 33209 GIJON
MARCOS HEVIA PUERTA (SERCOPEL)
C/ Puerto La Cubilla, 6
985342611
sercopel@telecable.es
08950 ESPLUGUES DE LLOBREGAT
ELECTRICAS FELIU
SANT ALBERT MAGNE,12-14 TD.2-B
933722302
feliusat@9chip.com | 39300 TORRELAVEGA
DEL CASTILLO
CEFERINO CALDERON, 13
942880390
settv@gmail.com| GIRONA
17005 GIRONA
SUREDA I ASSOCIATS, S.C.
FRANCESC ARTAU, 2
972236588
resuredgirona@gmail.com
9003 BURGOS
LEOPOLDO JOSE CEBRIAN EROLES
TRINIDAD 16
947203079
cebrian@movistar.es| 12003 CASTELLON
INST. ELECTR. JUMAR-2, SL
C/ BENICARLO, 15
964225133
proveedores@jumar2castellon.es| 17300 BLANES
FRANCISCO PORTILLO PEIRO
ASIAS MARC 1
972331249
serviciotecnico@portillotv.com
09400 ARANDA DE DUERO
JOSE MARIA GAMAZO PLAZA
ESGUEVA 4
947502532
regamazo@yahoo.es| 12500 VINAROS
FERCOM SERVICE C.B.
TOMAS MANCISIDOR 60
964450144
fercomcb@yahoo.es| 17740 VILAFANT
ELECTRONICA VILAFANT – SAT
NAVATA, 13
972506515 / 615090154
electronicavilafant@hotmail.com
10300 NAVALMORAL DE LA MATA
REPARACIONES MILLANES, C.B.
C/ GÓNGORA, 10
927531481/678508250
rep.millanes@telefonica.net| CIUDAD REAL
13003 CIUDAD REAL
NOVA ELECTRICIDAD
ALTAGRACIA, 1
926253101
manuelmartin1122@hotmail.com| GRANADA
18015 GRANADA
LUNSOL, S.L.
AVDA. VIRGEN DE LA CONSO 4,
LOCAL 2
958292565
info@lunsol.net
10600 PLASENCIA
ECOINFO (ANDRES GONZALEZ)
AVDA ESPAÑA, 45 NAVE 10
927411590
ecoinfo@ecoinfoplasencia.es| 14500 PUENTE GENIL
ELECTRO PEKIN S.L.
C/ANTONIO NAVAS LOPEZ, 11
957601339
electropekin@gmail.com| GUADALAJARA
19004 GUADALAJARA
FERRETERIA AL-YE
AVDA, EJERCITO,11-D POSTERIOR
949218662
ferreteriaal_ye1@hotmail.com
28038 MADRID
FERSAY VALLECAS -Tienda Fersay
Madrid Vallecas
C/PEÑA PRIETA, 17 LOCAL
911394704
scmrivas@gmail.com| MALLORCA
07008 PALMA DE MALLORCA
SAT  BALEAR
REIS CATOLICS, 72
971247695
satbalear@ono.com| PONTEVEDRA
36003 PONTEVEDRA
MARDEL RIAS BAIXAS
FERNANDEZ LADREDA, 67
986843760
mardelrias@mundo-r.com
28020 MADRID
ENRIQUE ARRIBAS GARCIA (jaen 18)
C/ JAEN Nº 8 JUNTO METRO ALVARADO
915342350
satjaen@gmail.com| MURCIA
30700 TORRE PACHECO
MIGUEL ANGEL SANMARTIN RAMIREZ
AVD. ESTACION 33/ CALLE COLON 46
968578838
info@electronicasanmartin.es| 36004 PONTEVEDRA
IMASON
LOUREIRO CRESPO, 43
986841636
imason@mundo-r.com
28220 MAJADAHONDA
ELECTRONICA TELIAR S.L.
REAL ALTA 7
916388702
teliar@teliar.es| 30203 CARTAGENA
MEGASON HI-FI SL
CARLOS III 30 BJS
968527519
megason@arrakis.es| 362111 VIGO
CARBON RADIO
AVDA. CAMELIAS, 145
98 623 61 46
carbonradio145@hotmail.com
28017 MADRID
ALTOHA
JOSE ARCONES GIL,13
913774645
ramon@altoha.es| 30300 BARRIO PERAL – CARTAGENA
FASEPA, S.L.
PROLONGACION ANGEL BRUNA, 6 BJ
868095680
luserrano@fasepa.es| 36205 VIGO
AJEPA & LUA’S S.L. (S.A.T. CERVANTES)
RUISEÑOR Nº 10 BAJO
986280230
pairis2006@yahoo.es
28035 MADRID
ALDEBARAN ELECTRICA (LUMAR)
CARDENAL HERRERA ORIA 257
917388761
aldebaran.electrica@hotmail.com| 30009 MURCIA
ELECTRO-SERVICIOS SEBA
ISAAC ALBENIZ 4 BAJO
968298593/629613574
electroservicioseba@gmail.com| SALAMANCA
37500 CIUDAD RODRIGO
TECNIHOGAR
AVDA. PORTUGAL, 10
923461964
tecni_hogar@telefonica.net
28807 ALCALA DE HENARES
ALDAMA
FERRAZ, 2
918815820| 30800 LORCA
DANIEL SANCHEZ RUIZ
DE LA HIGUERA,8 BAJO
968406757
satlorcadaniel@gmail.com| 37005 SALAMANCA
RAMON RODRIGUEZ TAPIA
LAZARILLO DE TORMES, 10
923238491
microram9@yahoo.es
MALAGA
29200 ANTEQUERA
JUAN J. MATAS REBOLLO (ELECTRONICA J&J)
PURGATORIO 1
BAJO
952702382
jjmatasr@gmail.com| NAVARRA
31011 PAMPLONA
FERRETERIA SAN ELOY ( MERCEDES )
MONASTERIO DE IRACHE, 33
948251095
admin@ferreteriasaneloy.es| 37002 SALAMANCA
ASISTENCIA TECNICA MORENO, S.L.
RECTOR TOVAR 15
923218079
asistenciatecnicamoreno@gmail.com
29303 MARBELLA
ELECTRICIDAD MURSA S.L.
C/SERENATA s/n frente nº 9
952867390
electricidadmursa@yahoo.es| 31591 CORELLA
Electro Servicio Muñoz  S. L.  (ESM Corella)
C/ Santa Barbara, 52
948780729
satcorella@gmail.com| SEGOVIA
40005 SEBASTIAN TORRES C.B.
C/ SAN ANTON,12
921 42 43 23
mariajosesebas@hotmail.com
29680 ESTEPONA
ELECTRICIDAD MURSA S.L.
VALENCIA 18
952807483
electricidadmursa@yahoo.es| 31500 TUDELA
ELECTRICIDAD FERNANDO, S.C.I.
YANGUAS Y MIRANDA, 12
948826457
okina@electricidadfernando.com| SEVILLA
41006 SEVILLA
PALACIO DE LAS PLANCHAS, S.L.
AFAN DE RIBERA, 107
954631191
sat@palaciodelasplanchas.com
29010 MALAGA
CAMBEL ELECTRONICA
MORALES VILLARUBIA,17
952277247
cambel.electronica@gmail.com| ORENSE
32002 OURENSE
ELECTRO COUTO, S.L.
MELCHOR DE VELASCO, 17
988235115
electrocouto@yahoo.es
merce@relevansl.com| 41700 DOS HERMANAS
FRANCISCO MUÑOZ LOPEZ
PURISIMA CONCEPCION 1
954728300
electrovalme@gmail.com
41100 CORIA DEL RIO
ELECTROCORIA S.L.
SAN FRANCISCO 11
954771998
electrocoria@hotmail.com| 46800 XATIVA
JOSE PASTOR DIEZ
C/ ABU MASAIFA, 6
962274794
sat-xativa@josepastor.es| 48980 SANTURCE
JULEN SAT
LAS VIÑAS 20-22
944617193
juanjosat@gmail.com
41530 MORON DE LA FRONTERA
DAVID QUINTERO TORREÑO
C/ SANTIAGO, 21 (Pta. Sevilla)
954852986
reparacionesquintero@hotmail.com| 46680 ALGEMESI
JOSE A. LLACER SANGROS
ALBALAT, 88
962423519
satllacer@hotmail.com| ZAMORA
49010 ZAMORA
TERESA PEREZ
DIEGO DE LOSADA, 10
980671386
sat.teresa1@gmail.com
41008 SEVILLA
ABASTEC
C/ SANTA MARIA DE LA HIEDRA, 1
(PIO XII)
954 353 300
pae@abastec.es| 46700 GANDIA
JOAQUIN MAYOR ESTRUGO
(TECNOGAR)
PRIMER DE MAIG 41-B
962865335
tecnogar33@gmail.com| ZARAGOZA
50001 ZARAGOZA
ELECTRO SANTOÑA, S.L.
SAN VICENTE DE PAUL, 48
976 392 102
electrosantona@hotmail.com
TARRAGONA
43001 TARRAGONA
SERTECS –
C/ CAPUCHINOS, 22
977 221 851
sertecs@sertecs.e.telefonica.net| 46470 CATARROJA
AirKival Climatización C.B
C/FRANCESC LARRODÉ, 7
961260633
sat@airkival.com / airkival@gmail.com| TERUEL
44600 ALCAÑIZ
CASES SANTAFE MARIO (LA RUEDA)
MIGUEL FLETA 27
978871016
electronicalarueda@gmail.com
VALLADOLID
47006 VALLADOLID
VILDA SERV.ASIST.TECNICA, S.L.
FALLA, 16 BAJO.DCHA.
983226229
vilda@vilda.es| TOLEDO
45005 TOLEDO
ELECTROHOGAR TOLEDO
RONDA BUENAVISTA, 27 LOCAL 6 F
925 223 828
electrohogar@electrohogartoledo.com| 47400 MEDINA DEL CAMPO
JESUS MANUEL MONSALVO MENDO
ANGUSTIAS,42
983810205
sattvc2002@yahoo.es
VALENCIA
46600 ALZIRA
TALLERES MOYA
C/ FAVARETA,49
96 241 85 87
tamoya@talleresmoya.com| 47002 VALLADOLID
ELECTRICIDAD RINCON, S.A.
LABRADORES, 9 Y 11
983297133
administracion@electricidadrincon.es| 46011 VALENCIA
ROBERTO BARRACHINA ALIAGA
-VALENCIANA, SA TECNICAC/FRANCISCO
BALDOMA, 86
Bajos 963554244/607304279
valencianasat@gmail.com
VIZCAYA
48004 BILBAO
SERTEK
C/ PADRE PERNET, 8
944112282
sertek@ya.com| 46700 GANDIA
RELGAN  – CAMILO GARCIA
MAGISTRADO CATALA, 16
962872810
relgangandia@gmail.com| 48013 BILBAO
REPARADOMESTICOS,JOSU
URKIXO ZUMARKALEA,79
944 90 41 66
josu@reparadomesticos.com
46005 VALENCIA
RELEVAN,S.L.
C/ MATIAS PERELLO ,49
963 222 529| 48011 BILBAO
R.E.  ABAD    MANUEL GONZALEZ
HERVERA
GREGORIO DE LA REVILLA, 34
944215271
mghervera@yahoo.es|

B &B TRENDS, S.L.
C. Cataluña, 24
P.I. Ca N’Oller 08130
Santa Perpètua de Mogoda
(Barcelona) España
C.I.F. B-86880473
www.bbtrends.esufesa logo

B&B TRENDS, S.L. · C.I.F. B-86880473
C. Cataluña, 24 P.I. Ca N’Oller 08130
Santa Perpètua de Mogoda (Barcelona) · España
www.bbtrends.es

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals