ROCCAT SYN Buds Air User Guide

June 12, 2024
ROCCAT

ROCCAT SYN Buds Air User Guide
ROCCAT SYN Buds Air

PACKAGE CONTAINS

  • 1× USB-A to USB-C Charging Cable
    Package Contents

  • Charging Case

  • Earbuds

  • 3 Sets of Silicone Ear Tips

CUSTOMIZE

Download the companion mobile app to customize the Syn Buds to your liking. Adjust and create EQ’s, remap the touch enabled functions, and update your firmware as needed without having to wire in.

EARBUDS CONTROLS

Earbuds Control

CHARGING CASE CONTROLS

Charging Case Control

Your Syn Buds Air give you 20 total hours of rechargeable battery life. Make sure to charge it regularly before storing.

CONNECT

Connecting Instruction

To connect to your smartphone, Windows® PC, or other Bluetooth® devices with the latest software, follow the below steps:

  1. Turn on Bluetooth® on your device.
  2. Open the case with the earbuds inside to initiate pairing.
  3. Select Syn Buds Air from your device’s Bluetooth® list.

LED INDICATIONS

Connection Status LED

Solid White **Pairing Successful***
Fast Blinking White Pairing

Connection Status LED

Solid White| Battery Level Indication

  • 3 LED‘s – Full Battery
  • 2 LED‘s   50% Battery
  •  1 LED – Low Battery

---|---

FUNCTIONS

Both the left and right ear buds have operatable touch-enabled surfaces that respond to the following actions:

ACTION FUNCTION
Place in Case Charging, and Powers off
Single Tap Answer/End Calls OR Play/Pause Track
Double Tap Skip Forward
Triple Tap Skip Back
Press and Hold for 2 Seconds Activate Your Device’s Smart Assistant
3 Short Taps + 1 Long Tap Activate/Deactivate Game Mode

FUNCTIONS

Functions
Functions

SETUP ON THE NINTENDO SWITCH

Setup

  1. Make sure your Syn Buds Air are not paired to another device.
  2. Place your Syn Buds Air in the case with the lid open to put them into pairing mode and keep them close to your Nintendo Switch™.
  3. In your Nintendo Switch’s home menu. Go to System Settings > Bluetooth® Audio > Pair Device
  4. Select the Syn Buds Air from the menu to pair.
  5. Once the pairing is successful, select “OK” on the prompt.
  6. Adjust your Syn Buds Air volume from the Nintendo Switch’s volume controls on the top of the console.

If your Syn Buds Air are not shown on the list of detected devices, hit “Y” to search again. If no devices were detected, select “OK” on the prompt, then “Pair Device” again to search again.

REGULATORY COMPLIANCE STATEMENTS FOR THE SYN BUDS RX & TX

LOCAL RESTRICTIONS ON RADIO USAGE
Caution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.

To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer‘s OEM Regulatory Guidance document at the following URL http://www.turtlebeach.com/homologation or contact Turtle Beach directly.

FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES

This section includes the following FCC statements for the Syn Buds:

  • FCC IDs: XGB-14102L & XGB-14102R
  • RF Radiation Exposure & Hazard Warning
  • Non-Modification Statement

CLASS B INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION (EFTA) REGULATORY

COMPLIANCE

This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:

AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND


Declaration of Conformity

Marking by this symbol:

indicates compliance with the Essential Requirements of the EMC Directive of the European Union (2014/30/EU). This equipment meets the following conformance standards:

Safety: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013(T-Mark License),
IEC 60950-1:2005 (2nd Ed.) + Am 1:2009 + Am 2:2013 (CB Scheme Certificate),
IEC 62368-1:2014,
EN 50332-2:2013
EMC: EN 301489-1 V2.1.1(2017-02), EN301489-17 V3.1.1(2016-11)
Radio: EN 300328 V2.2.2
SAR: EN 62311:2008
Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU,
REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC,
Package 94/92/EU
Radio frequency: 2400MHz
Operating frequency: 2400~2483.5MHz
Max. Output power: 10dBm

Please visit the following URL for a complete copy of the Declaration of Conformity:
http://www.turtlebeach.com/homologation

Warning!
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures.

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the- recycling-room/

VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA
© 2021 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher.
Symbol

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals