COOLER MASTER GX II Gold Full Modular 80 Plus Gold Certified User Manual
- June 15, 2024
- COOLER MASTER
Table of Contents
- Safety Instructions
- Installing the Power Supply Unit
- Troubleshooting
- Warranty
- Pin Layout Connectors
- Main Power Connector
- +12V Power connector
- PCle Power connector
- 12VHPWR Power Connector
- Serial ATA Power Connector
- Peripheral Connector
- Company Information
- For Australia only
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**COOLER MASTER GX II Gold Full Modular 80 Plus Gold Certified
**
Safety Instructions
-
Do not open the power supply unit as this can lead to serious injury or death.
-
Do not insert objects into spinning fan. This will damage the power supply unit and can lead to injuries.
-
Do not use excessive force when attaching the power connectors to the power supply unit.
When correct connectors are used, excessive force is not need to install them. -
Keep power supply unit in dry environments away from humidity. If the power supply unit gets wet, immediately remove the AC power plug from the wall and the power supply unit.
For your own safety, it is recommended that you do not use the power supply unit again after getting it wet. -
Avoid using low quality extension cables for the power supply side connectors as this can cause the cables to melt and even lead to fire.
-
This power supply unit has been tested for PC usage only. We cannot guarantee operation or safety performance when used for other applications.
Installing the Power Supply Unit
- Make sure the main power switch is turned off before installing the power supply unit.
- Secure the power supply unit within the PC case enclosure with 3 or 4 screws for grounding and stability purposes.
- Connect the power connectors according to the motherboard, graphics card, and other device user guides that will be used in the system.
- Connect the AC power connector.
- Switch on the power switch.
Troubleshooting
If your system does not turn on after installing the power supply, please follow the troubleshooting guide as listed below:
- Make sure the AC power cord is correctly and firmly connected on both sides.
- Make sure the power switch is turned on.
- Make sure the main power connector and +12V power connectors are correctly connected to the motherboard.
- If the power supply does not function properly, please contact our customer support immediately.
Warranty
Cooler Master guarantees this device to be free of defects in material and
workmanship and provide a minimum 10 -year hardware limited warranty for the
power supply on the date of purchase. Please register on our official website
to activate your limited warranty. This product was designed and intended for
computer usage only. Using this device for other applications will void the
warranty. If you are not familiar with computer hardware installation, please
ask a professional for assistance.
This warranty only applies to the power supply unit and does not include
accessories or connected components.
This warranty only applies to damage caused by normal use and is void if it is
determined that the device was damaged because of abuse, alteration, misuse,
negligence, incorrect voltage supply, air/water pollution, accidents, or
natural disasters.
Please use the included power cables. Do NOT mix cables from different series
with different units. If the power supply or other equipment is damaged due to
not using the original cable, the warranty will be void and we will not
provide warranty services.
In the event of any defects within the warranty period, please return product
to the dealer or retailer from whom you purchased for a replacement/repair.
Please contact our customer service team for any technical or product related
questions.
Limited Warranty Period:
http://www.coolermaster.com/service/warranty.html
Customer Support: https://account.coolermaster.com
Pin Layout Connectors
Main Power Connector
Pain 1 Pin 13
| Pin | Description |
|---|---|
| 1 | +3.3V |
| 2 | +3.3V |
| 3 | COM |
| 4 | +5V |
| 5 | COM |
| 6 | +5V |
| 7 | COM |
| 8 | P.G. |
| 9 | +5Vsb |
| 10 | +12V |
| 11 | +12V |
| 12 | +3.3V |
| Pin | Description |
| --- | --- |
| 13 | +3.3V |
+3.3Vs
14| -12V
15| COM
16| PS-ON
17| COM
18| COM
19| COM
20| —–
21| +5V
22| +5V
23| +5V
24| COM
+12V Power connector
| Pin | Description |
|---|---|
| 1 | COM |
| 2 | COM |
| 3 | COM |
| 4 | COM |
Pint Pin5
4+4Pin
Pint Pin5
8Pin
| Pin | Description |
|---|---|
| 5 | +12V |
| 6 | +12V |
| 7 | +12V |
| 8 | +12V |
PCle Power connector
| Pin | Description |
|---|---|
| 1 | +12V |
| 2 | +12V |
| 3 | +12V |
| 4 | COM |
Pint Pin5
| Pin | Description |
|---|---|
| 5 | COM |
| 6 | COM |
| 7 | COM |
| 8 | COM |
12VHPWR Power Connector
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | +12V | 7 | GND |
| 2 | +12V | 8 | GND |
| 3 | +12V | 9 | GND |
| 4 | +12V | 10 | GND |
| 5 | +12V | 11 | GND |
| 6 | +12V | 12 | GND |
| S1 | CARD_PWR_STABLE | S3 | SENSE 0 |
| S2 | CARD_CBL_PRES# | S4 | SENSE 1 |
Serial ATA Power Connector
| Pin | Description |
|---|---|
| 1 | +3.3V |
| 2 | COM |
| 3 | +5V |
| 4 | COM |
| 5 | +12V |
Peripheral Connector
| Pin | Description |
|---|---|
| 1 | +12V |
| 2 | COM |
| 3 | COM |
| 4 | +5V |
Company Information
Europe – Cooler Master Europe B.V.
Lodewijkstraat 1b, 5652AC Eindhoven, The Netherlands
Tel: +31-(0)40-702-0900
North America – CMI USA, Inc.
1 N Indian Hill Blvd Suite 200,
Claremont, CA 91711, USA
Tel: +1-888-624-5099
China – Cooler Master China
Room 112, Building 9, No. 327, Songjin Road, Jinshanwei Town,
Jinshan Dist., Shanghai City, China
Tel: +86-21-51872177
For Australia only
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a majorfailure.
[Asia Pacific – Cooler Master Technology Inc. 7F., No. 398, Xinhu 1st Rd.,
Neihu Dist., Taipei City 114065 ] Telephone: +886-2-2225-3517 [standard
international call charges apply. ]
Equipment name
: Type designation (Type)
MPX-A503-AFAG,MPX-C550033–AAFFAAG MPX-7503-AFAG,MPX-8503-AFAG
Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
|
O
|
O
|
O
|
O
|
O
|
O
|
__
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
__
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
|
O
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2: “O” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence.
Note 3: The “-” indicates that the restricted substance corresponds to the
exemption.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>