Beacon LIGHTING 300862 LEDlux Orsay 6W Wall Bracket Instruction Manual

Installation Instructions
SKU# 300862 (1477AA)
Rated Voltage 230-240V~ 50Hz

THANK YOU FOR PURCHASING THIS QUALITY LUCCI PRODUCT, TO ENSURE CORRECT FUNCTION AND SAFETY, PLEASE READ AND SAVE ALL  INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARRANTY:

• This light fitting is covered by a 12-month warranty; please retain the proof of purchase and evidence of installation by a licensed electrician.

INSTALLATION REQUIREMENTS:

• Must be installed by a Licensed Electrician.
• Must be installed according to the current wiring rules AS/NZS3000.
• Suitable for use “indoors” only.
• The mounting point must be able to support 4 times the weight of the fitting.
• This fitting is not suitable for dimming.

INSTALLATION DIRECTIONS:

• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure there is no components missing before assembling.
• Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the lace of purchase for inspection, repair or replacement.
• Ensure all power has been isolated for your own safety.
  1. Use the mounting bracket as a template to mark the screw positions onto the wall. Drill holes into the wall and put the plastic anchors into the holes. Secure the mounting bracket onto the wall with the screws provided. Ensure the screws used are suitable for the mounting surface.
  2. Connect the earth and main supply wire to the terminal block on the bracket. Ensure that the wires are secure and no bare wires are exposed.

3. Attach the fitting onto the wall bracket.
4. Secure the fitting to the wall bracket by tightening the screw on the fitting.

TIPS:

1. Always ensure the power is off and the fitting has cooled down before performing any maintenance or adjustment to the fitting.
2. To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
3. Handle the fitting and cover/shade with care to avoid breakage.
4. Find a suitable location away from liquids and hazards.
5. Ensure that the fitting does not come in contact with corrosive chemicals, etc.
6. To clean, wipe with a damp clean cloth. Never soak the fitting with water.

SPECIFICATIONS:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>