IMPECCA FWF-1605 16 Inch Wall Fan User Guide
- June 9, 2024
- IMPECCA
Table of Contents
- IMPECCA FWF-1605 16 Inch Wall Fan
- INITIAL SAFETY INSTRUCTIONS
- OTHER ELECTRICAL SAFETY
- GETTING STARTED: WHAT’S IN THE BOX
- UNIT OVERVIEW AND FEATURES
- WALL MOUNTING
- OPERATING THE FAN
- CARE, CLEANING, AND MAINTENANCE
- REPLACING THE FUSE
- TIPS AND STORAGE INSTRUCTIONS
- CUSTOMER SUPPORT
- SIX MONTH LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IMPECCA FWF-1605 16 Inch Wall Fan
INITIAL SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE TO ENSURE SAFETY, AS THEY MAY NOT ALL BE OBVIOUS.
- Any use of this product or its acces-sories in any manner not recom-mended by the manufacturer may cause injury to persons or damage to the appliance.
- This product has no user-serviceable parts except for the fuse. Other than the instructions provided in this manual, do not attempt to examine or repair this product yourself. Only qualified service personnel should perform any servicing.
- Do not allow a child to use this appli-ance. Keep the appliance out of chil-dren’s reach at all times. Children should be supervised to ensure that they do not play with this appliance.
- Keep any parts or packaging materi-als well away from children. These are a potential source of suffocation or other danger.
- Always operate the appliance on a dry, flat, stable surface.
- This appliance is not intended for use by persons with reduced physi-cal, sensory, or mental capabilities that may lead to improper use or injury from operating the appliance.
- Discontinue any operation of the appliance if any of its parts malfunction or are damaged in any manner. Take the appliance to the nearest authorized service facility for exam-ination, repair, or adjustment.
- Do not use the appliance if it has been submerged or placed under running water.
- Do not leave the product unattend-ed while in use. Unplug the product from the electrical outlet when not in use.
- Before the appliance is used, check the unit (including the power cord) and all parts for any faults or de-fects. Do not operate the fan if the motor, housing, cable or any other parts appear to be damaged.
- Do not operate the fan in the pres-ence of explosive or flammable fumes.
- Do not place the fan or any parts near an open flame, cooking, or other heating appliance.
- Avoid contact with moving fan parts.
- This fan must be mounted before it is used. See instructions later in this guide.
OTHER ELECTRICAL SAFETY
WARNING : To reduce the risk of fire, electric shock or personal injury:
- Do not use this fan with any solid-state speed control device.
- Unplug fan before cleaning or servicing.
- To reduce the risk of electric shock and injury to persons, do not use this product in a window.
This appliance has a polarized plug, meaning that one blade on the plug is wider than the other. To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet and follow the fuse replacement steps later in this guide. If the replacement fuse blows, a short-cir-cuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
- Completely assemble the product for use before plugging it into an outlet.
- Make sure the power cord does not touch any hot surfaces.
- Extension cords are not recommended for use with this appliance.
- Do not plug or unplug the product into/from the electrical outlet with wet hands.
- Discontinue any operation of the appli-ance if the cord or plug are damaged.
- To disconnect the fan from an electri-cal outlet, ensure the product is turned off and then pull directly on the plug; do not pull on the Power Cord.
- Do not put any stress on the power cord where it connects to the product, as this is likely to cause a malfunction or safety hazard.
- Always ensure the product is un-plugged from the electrical outlet and that all parts have stopped before assembling, disassembling, relocating, or cleaning it.
- Do not route the cord underneath any carpeting. Do not cover the cord with throw rugs, runners, or similar cover-ings. Do not route the cord under furniture or other appliances. Arrange the cord so it is away from areas where it could be tripped over.
- For batteries used with the remote:
- Do not dispose of batteries in fire.
- Do not mix old and new batteries.
- Do not mix alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries.
GETTING STARTED: WHAT’S IN THE BOX
Thank you for purchasing this quality fan from FanFair!Please verify your box contains the following items:
-
Fan
(with Phillips screw, plastic anchors and remote) -
User’s Guide
-
Warranty
(inside this User Guide) -
Tech Support Card
- Remove the rear grill mounting nut from the motor housing by turning it counter-clockwise.
- Place the rear grill onto the motor housing, aligning the three raised knobs on the top of the motor housing with the three holes on the grill. Make sure the indents of the rear grill are on the bottom.
- Attach the rear grill mounting nut. Tighten it, turning clockwise.
- Align the blade onto the shaft and secure it with the blade knob, tightening it counter-clockwise.
- Align the arrows on the top of the front grill with the rear grill. Push the front grill clips into the rear grill until you hear a snap for each clip.
The remote uses AAA batteries (not included).
Insert them as follows:
UNIT OVERVIEW AND FEATURES
- Front grill
- Clip
- Blade knob
- Blade
- Rear grill mounting nut
- Rear grill
- Shaft
- Motor / Housing
- Hanging bracket
- Control panel
- Cable wire
- Remote control
WALL MOUNTING
This fan must be mounted to a wall before use. A Phillips head screw has been
provid-ed for this purpose.
WARNING: Before mounting the fan, ensure it is unplugged and set to “0”
or “OFF”
The fan should be mounted so that the blades are more than 2.3m above the
floor.
- Locate and mark the position on the wall where the fan will be mounted (prefera-bly at a wall stud).
- Use the fan bracket against the wall as a guide for creating the holes.
- Insert the anchors (provided) into the wall
- Insert the screw (provided) into the wall stud. Leave approx 5/8” (1.6cm) of the screw exposed.
OPERATING THE FAN
Make sure the speed control is at the 0 or OFF position. Set the fan on a
level and dry wall surface and plug the power cord into the socket.
To use the Remote Control – Open the cover at the bottom of the remote control
and insert 2 AAA batteries (not included).
- OFF: switches off the fan.
- ON/SPEED: switches on the fan and sets the speed.
- TIMER: set the running time: 0.5, 1, 2, 4 or 7.5hrs
- OSC: allows the fan head to oscillate (turn) from left to right. Press once to activate and once more to deactivate
You may also operate most of the fan features without using the remote. There is a control panel located on the wall fan itself:
Press to switch on and set the speed
Press to switch off the fan
Press to oscillate or keep stationary
After turning the fan off, always be sure to unplug it from the electrical outlet.
CARE, CLEANING, AND MAINTENANCE
- Be sure the fan control is in the “0” or “OFF” position and that the fan is unplugged before cleaning.
- Access the fan blade by removing the front grill and securing screw.
- Clean the fan blade, front and rear grills gently with a soft, moist cloth.
- Replace the blade. Tighten the securing screw and securely fasten the front grill.
- DO NOT immerse the fan in water. Never allow water to enter the Motor Housing.
- DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
REPLACING THE FUSE
Before replacing the fuse, turn the fan off. Grasp the plug and remove it from the outlet device. Do not unplug the fan by pulling on the cord. With the fan unplugged, follow the steps in this diagram:
-
A Open the fuse cover by sliding the access cover on top of the attachment plug to-wards the plug blades.
-
B Remove the fuse carefully by gently pulling out the ends of the fuse from the recep-tacle. Replace the fuse only with 5 Amp, 125 Volt fuse.
-
C Install the replacement fuse by first placing the end of the fuse into the fuse recep-tacle, which is opposite the blades of the plug, then carefully push in the other end.
Only push against the metal end of the fuse, not the glass portion. -
D Close the fuse cover by sliding the cover back into the plug until it latches in place. Ensure it is completely closed.
Risk of fire: Replace the fuse only with 5 Amp, 125 Volt fuse. Do not re- place the plug that comes with your fan. It contains a safety device (the fuse) that should not be removed. Do not use this product if the plug is damaged.
TIPS AND STORAGE INSTRUCTIONS
The product should be packaged in its original box for storage. Place the fan in a storage room with low humidity.
If the fan is not running properly:
If your fan is plugged into a known, working outlet and the fuse is not the
problem, you may need to return the product or have it serviced. Please return
the fan to the place of the original purchase or see your warranty. Do not
attempt to open the motor housing yourself; doing so may void your warranty
and cause damage to the fan or personal injury.
CUSTOMER SUPPORT
Visit our website to contact us, find answers to Frequently Asked Ques-tions,
and for other resources which may include an updated version of this user’s
manual.
www.impecca.com
If you wish to contact us by phone, please be sure to have your model number
and serial number ready and call us between 9:00am and 6:00pm ET, at +1
866-954-4440.
Keep tabs on Impecca’s newest innovations and enter contests via our social
network feeds:
www.facebook.com/Impecca/
www.instagram.com/impecca/
@impeccausa
SIX MONTH LIMITED WARRANTY
SIX MONTH LIMITED WARRANTY
Impecca® warrants this product against defects in material and workmanship to the original purchaser as specified below. Please register your product online within fourteen (14) days of purchase.
PARTS – if the product is determined to have a manufacturing defect,
within a period of six (6) months from the date of the original purchase,
Impecca® will repair or replace the product parts at no charge (for parts) to
consumers in the U.S.A. and Canada.
LABOR – if the product is determined to have a manufacturing defect,
within a period of thirty (30) Days from the date of the original purchase,
Impecca® will repair or replace the product at no charge to consumers in the
U.S.A. and Canada. After thirty (30) Days, it will be the responsibility of
the consumer.
Shipping costs to and from our warranty service center are the sole
responsibility of the consumer.
To obtain warranty service by an authorized Impecca® service center, please
email us
at: service@impecca.com to obtain a Repair and
Maintenance Authorization (RMA) number and to locate the Warranty Service
Center nearest you. Once authorized, you must mail the product to the
authorized Impecca® service center in its original product packaging materials
or equivalent, to prevent damage while in transit.
Further, should Impecca® determine that the product is outside of the Warranty
terms, Impecca® will return the product to sender at sender’s expense without
being repaired or replaced, unless authorized by the consumer to service the
out-of-warranty product at consumer’s expense. All handling or restocking
charges for returns and/or replacements shall be non-refundable.
Impecca® specifically excludes from this warranty any non-electric/mechanical
attachments, accessories, and disposable parts including, but not limited to,
outside case, connecting cables, batteries, and AC adapters. Impecca® reserves
the right to repair or replace defective products with the same, equivalent,
or newer models.
We reserve the right to either repair or replace product at our discretion.
Replacement may be either new or refurbished and while every endeavor will be
made to ensure it is the same model, if same model is not available, it will
be replaced with a model of equal or higher specification.
Normal “Wear and Tear” is not covered by this, or any other, warranty.
Further, Impecca® hereby reserves the right to determine “Wear and Tear” on
any and all products. Tampering or opening the product casing or shell will
void this warranty in its entirety.
In addition, this warranty does not apply if the product has been damaged by
accident, abuse, misuse, or misapplication; has been altered or modified
without the written permission of Impecca®; has been serviced by a non-
authorized repair center of Impecca®; has not been properly maintained or
operated according to the operation manual; has been used for commercial, non-
household purposes; has been cosmetically damaged; was not imported by
Impecca®; was not manufactured according to specification of the United States
market; was damaged due to improper installation or neglect by the consumer;
was damaged due to improper packaging in shipment to the Warranty Service
Center; was damaged due to natural disasters; or if the serial number for the
product has been removed or defaced.
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO SIX (6) MONTHS
PARTS AND THIRTY (30) DAYS LABOR FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE
OF THIS PRODUCT.
THESE WARRANTIES AND REMEDIES ARE THE SOLE AND EXCLUSIVE WARRANTIES AND
REMEDIES IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. NO OTHER
WARRANTIES, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, ARE GIVEN.
IMPECCA® IS NOT RESPONSIBLE OR LIABLE FOR ANY DAMAGE, WHETHER SPECIAL,
INCIDENTAL, CONSEQUENTIAL, DIRECT OR OTHERWISE, OR WHETHER KNOWN OR SHOULD
HAVE BEEN KNOWN TO IMPECCA®, INCLUDING LOST PROFITS, GOODWILL, AND PROPERTY
AND PERSONAL INJURY RESULTING FROM ANY BREACH OF WARRANTY, THE INABILITY TO
USE THE PRODUCT OR UNDER ANY LEGAL THEORY IN CONTRACT OR TORT. IMPECCA
LIABILITY IS LIMITED TO THE ACTUAL PURCHASE PRICE PAID TO THE RETAIL SELLER OF
THE DEFECTIVE PRODUCT.
No Impecca® dealer, agent, or employee is authorized to make any modification,
extension, change or amendment to this warranty without the written consent
and authorization from Impecca®.
Some states do not allow the exclusion or limitation of implied warranties or
liability for incidental or consequential damages, or do not allow a
limitation on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights, which vary from state to state.
Important: Be Sure to Register Your Product at WWW.IMPECCA.COM within 14 Days
Impecca® USA PA 18711 www.impecca.com
service@impecca.com
*Do not send any returns to this address, as they may be lost and this will delay your repair and service process.