RAPTURE ANACONDA Wired Gaming Mouse User Manual

: June 9, 2024
: RAPTURE

Table of Contents

THANK YOU FOR CHOOSING US
SAFETY INFORMATION
TECHNICAL PARAMETERS
OVERVIEW
INSTRUCTIONS
- Installation
- Software
Resolution setting
Interchangeable side covers
Left side covers
CLEANING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RAPTURE ANACONDA Wired Gaming Mouse

THANK YOU FOR CHOOSING US

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you choose us again the next time you make a purchase

SAFETY INFORMATION

Read the safety instructions and operating instructions. Failure to follow the safety and operating instructions can result in personal injury or equipment damage. And it may void your warranty. This product is only suitable for household use.

This product is not a toy. It may contain small components. Please keep away from children.
Do not use or leave the product in a dusty or otherwise polluted environment.
Do not leave the product in high or low ambient temperatures. Store the product in a dry place
Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
Do not touch the product with wet hands.
This product is not considered a light fixture. Make sure that continuous operation does not exceed six hours.
Never look into the light for a long time. There is a risk of serious eye damage.
Do not disassemble the product. Inexpert modifications can damage the product and cause serious injuries.
Do not immerse the product in water or other liquids or throw it into a fire.
Do not leave the product unattended while it is in operation.
Avoid switching the product on and off frequently and repeatedly.
While the product is in operation, it may become hot. This is normal. Therefore, make sure that there are no heat-sensitive objects / surfaces near the product.
If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
Avoid overloading the product. Avoid dropping the product.
Do not place any objects on the product. There is a risk of irreversible damage to the product.
This product does not contain parts repairable by the user. In the event of a malfunction, defect or if the product does not work properly, contact the nearest authorized service center. Check it regularly for damage.
Use only a soft, clean, dry cloth to clean the surface.

Do not use any type of chemical, abrasive pad, gasoline, thinner or other similar substance for cleaning. Before cleaning, make sure that the product is disconnected from the power supply.
Store the product in a dry and well ventilated place.
Do not place any objects on the product when in storage

TECHNICAL PARAMETERS

Sensor	PixArt PMW3325
Resolution	800 – 10,000 DPI

(default setting is 3,600 DPI)

OVERVIEW

Overview

Left mouse button
Centre wheel
Removable left side covers (2 pcs: one with three control buttons, one with nine control buttons)
Right mouse button
Removable right side covers (2 pcs – each with a different shape to customize the final look of the mouse)
DPI+/DPI- button (resolution setting)
Optical sensor (located at the bottom of the mouse

INSTRUCTIONS

Installation

Insert the USB-A connector into the USB-A port of your computer.
The mouse is installed automatically so you can control the mouse quickly and comfortably.

Software

You can download the advanced mouse setup software using the QR code provided below.

Resolution setting

You set the resolution of the mouse sensor with the DPI + and DPI- buttons, where with the DPI + button you increase the sensor resolution and with the DPI- button you decrease the sensor resolution. The default setting is 3,600 DPI.
Each sensor resolution level has its own backlight colour for the DPI+ and DPI- buttons.

Set level of the sensor resolution	Color backlight
800 DPI	Red
1,600 DPI	Green
2,400 DPI	Blue
3,600 DPI	Orange
5,000 DPI	Purple
10,000 DPI	White

Interchangeable side covers

The mouse comes with two interchangeable left covers and two interchangeable right covers. The covers can be combined with each other.

Left side covers

cover with three control buttons (forward/reverse/triple click)
cover with nine control buttons (forward/backward/throttle/ DPI lock/ buttons 1 to 5)

The right side covers are decorative covers, each with a different shape and are used to customize the final look of the mouse.

CLEANING

Keep the mouse clean. Before cleaning, disconnect the USB-A connector from your computer. USE only dry and clean cloth for cleaning. Do not use harsh cleaners, solvents, gasoline or other similar substances. Never wash the mouse with water and do not immerse it in water.