RAPTURE RPT-GMW1000P01 PYTHON Wired Mouse User Manual
- June 9, 2024
- RAPTURE
Table of Contents
- RAPTURE RPT-GMW1000P01 PYTHON Wired Mouse User Manual
- THANK VDU FDR CHDDSING US!
- SAFETY INFORMATION
- TECHNICAL PARAMETERS
- OVERVIEW
- INSTRUCTIONS
- Saftwara
- Turning the mause Dn/Dff
- Rasalutian satting
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RAPTURE RPT-GMW1000P01 PYTHON Wired Mouse User Manual
THANK VDU FDR CHDDSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you choose us again the next time you make a purchase.
SAFETY INFORMATION
Read the safety instructions and operating instructions.
Failure t □ fallow the safety and operating instructions can result in
personal injury □ r equipment damage. And it may void your warranty.
This product is only suitable far household use.
- This product is not a t □ y. It may contain small component
- Please keep away from children.
- D □ n □t use □ r leave the product in a dusty □ r otherwisepolluted environment.
- D □ n □t leave the product in high □ r law ambient temperatures. Stare the product in a dry place
- Keep this product away from heat sources such as staves □ r direct sunlight. Na naked flame sources, such as lighted candles, should be placed □ n the product.
- D □ n □t expose the product t □ dripping □ r splashing water □ r other liquids. D □ n □t place containers filled with water, such as vases, □ n the product.
- D □ n □t touch the product with wet hands.
- This product is n □t considered a light fixture. Make surethat continuous operation does n □t exceed six hours.
- Never look int □ the light far a Lang time. There is a risk □f serious eye damage.
- D □ n □t disassemble the product. Inexpert m□ dificati □ ns can damage the product and cause serious injuries.
- D □ n □t immerse the product in water □ r other liquids□ r throw it int □ a fire.
- D □ n □ t leave the product unattended while it is in operation.
- Avoid switching the product □ n and off frequently and repeatedly.
- While the product is in □ perati □ n, it may became hat. This is normal. Therefore, make sure that there are no heat-sensitive abjects/ surfaces near the product.
- If y □ u notice an unpleasant □ d □ r or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
- Avoid □verl□ ading the product. Avoid dropping the product.
- D □ n □t place any objects □ n the product. There is a risk of irreversible damage ta the product.
- This product does n □t contain parts repairable by the user . In the event □f a malfunction, defect □ r if the product does n □t work properly, contact the nearest authorized service center. Check it regularly far damage.
- Use only a soft, clean, dry cloth t □ clean the surface. D □ n □t use any type □ f chemical, abrasive pad, gasoline, thinner □ r other similar substance far cleaning. Before
cleaning, make sure that the product is disconnected from the power supply. Stare the product in a dry and well ventilated place. nn nnt ri'”‘””‘ l’ln!J nhjF>r,tc; nn thF> nrnrh 1r,t \AthF>n i
TECHNICAL PARAMETERS
OVERVIEW
-
Left mouse button
-
Centre wheel
-
Side buttons forward / backward
-
Cable
-
Right mouse button
B. DPl+/DPI- button (resolution setting) -
Optical sensor
INSTRUCTIONS
lnstallatian
Plug the USB end of the interface cable into the appropriate port on your
computer. The mouse is installed automatically so you can control the mouse
quickly and comfortably.
Saftwara
You can download the advanced mouse setup software using the QR code provided.
Turning the mause Dn/Dff
The mouse turns on automatically when you turn on your computer. The RGB backlight turns on automatically when the mouse is turned on.
Rasalutian satting
You set the resolution of the mouse sensor with the □ Pl + and □ Pl- buttons,
where with the □ Pl + button you increase the sensor resolution and with the □
Pl- button you decrease the sensor resolution.
Each sensor resolution level has its own backlight color.
When changing the □ Pl, the mouse flashes the color of the given resolution
level.