SCOTT 2023 Genius User Manual

SCOTT 2023 Genius

GEOMETRY & TECHNICAL DATA

• SEATPOST mm 31.6
• SEATPOST CLAMP mm 34.9
• TRAVEL mm 150 Rr 160 Ft
• SHOCK LENGTH mm 185
• SHOCK STROKE mm 55
• HARDWARE M.FRAME mm Trunnion
• HARDWARE LINKAGE mm 8 X 20
• MAX ROTOR mm 180 Rr 203 Ft
• MAX CHAINRING Tooth 34
• MAX TYRE WIDTH in 2.6
• MAIN PIVOT / CHAINSTAY mm 61802-2RS x 2
• LINKAGE / SEATTUBE mm 61806-2RS x 2
• LINKAGE / SEATSTAY mm 61802-2RS x 2
• SEATSTAY / CHAINSTAY mm 61801-2RS x 4

MY23 GENIUS/ST SM /ST MED /ST LG /ST XL /ST

• A Head tube angle ° 65.1 63.9 65.1 63.9 65.1 63.9 65.1 63.9
• B Head tube length mm 90 90 100 100 120 120 135 135
• C Top tube horizontal mm 570.1 570.1 602.2 602.2 631.3 631.3 659.3 659.3
• D standover height mm 728.5 728.5 738.5 738.5 753.5 753.5 768.5 768.5
• E BB offset mm -33 -33 -33 -33 -33 -33 -33 -33
• F BB height mm 342.5 342.5 342.5 342.5 342.5 342.5 342.5 342.5
• G Wheelbase mm 1182 1195 1216 1229 1249 1263 1281 1294
• I BB center to TST mm 380 380 410 410 440 440 470 470
• J Seat angle ° 76.8 76.8 77.1 77.1 77.2 77.2 77.4 77.4
• K Chainstay mm 440 440 440 440 440 440 440 440
• L Reach mm 430 430 460 460 485 485 510 510
• M Stack mm 617 617 626.1 626.1 644.2 644.2 657.8 657.8
• Fork Rake mm 44 44 44 44 44 44 44 44
• Trail mm 125.8 125.8 125.8 125.8 125.8 125.8 125.8 125.8

GENIUS / GENIUS ST

GEOMETRY & TECHNICAL DATA CONT.

Please observe the maximum seatpost insertion so not to damage the frame.
Small: 173 mm Max Insertion
Medium: 204 mm Max Insertion
Large: 234 mm Max Insertion
X-Large: 265 mm Max Insertion

Please note that on the small sized frame it is only possible to use a 500 ml water bottle, with a side entry cage.

HEADSET ADJUSTMENT

It is important to install the headset correctly depending on the set up required. There are two types of headset cups.
0° & 0.6° ( 64° & 65°) These can be indentified from the stamp on the inner surface of the headset cup
The headset is available in two options:
288251 SYN HEADSET ZS56/28.6-ZS56/40 MTB
290060 SCO HEADSET CUP KIT SPARK 22
Do not use a standard headset tool to remove these plastic headset cups.

Slacker

Ste eper

SAG ADJUSTMENT

1. Wear your normal riding gear, set the sage meter to zero & the twinloc in the open position.
   

2. Gently sit on the bike allowing the sag meter to move. Once completed dismount the bike gently. Check the value.
   

If the sag value is not to your liking within the sag range indicated, adjust the shock pressure as indicated above.

The sag indicator is available as a separate part. Check with your Authorised Scott Dealer for the correct installation.
297094 SCO SAG INDICATOR GENIUS 23

TWINLOC & TRACLOC

The Genius Twinloc follows the same system as the Spark 2022. The Genius ST is rear Tracloc only: 291219 BLD TRACLOC LINKIN 22

CONTESSA GENIUS ST 910 TRACLOC 291219 N/A YES
CONTESSA GENIUS  920 TWINLOC 290009 BLUE CAM YES

CABLE ROUTING

297134 SCO CABLE GUIDE H-TUBE INNER SCALE AL 23
Foam tubing: 277026 SCO CABLE ANTI-RATTLE LINER 90CM 20

CABLE ROUTING

Twinloc / Tracloc

Rear Derailleur

SPARE PARTS

• 297086 SCO STEM ACCESSORY COVER COMBO 22

• 297672 SCO CABLEGUIDE & BB COVER GENIUS 23

• 296606 SCO CHAINGUIDE GENIUS 23

• 296609 SCO AXLE RWS REAR 148X12 GENIUS PLUG 23

• 296610 SCO SWINGARM REP KIT GENIUS 23 297673 SCO MAIN PIVOT SPARK 22 / LUMEN 23
  

297522 SCO STEM SPACER/TOP CAP GENIUS 23 Spacers included: 2 x 5 mm / 2 x 10 mm / 2 x 2 mm (Compression Ring & Stem Cap Assembly)
The kit fits all stem options, Hixon IC / Combo / AM 1.5 / AM 2

419615 SCO GENIUS CARBON 23 CS / ST PROT
419616 SCO GENIUS ALLOY CS / ST PROTECTORS

286000 SCO DROPOUT SRAM UDH 21
297671 SCO DROPOUT SHIMANO UDH DM 23

297277 SCO CABLE / SHOCK DT COVER GENIUS 23

MANUFACTURER’S GUARANTEE,

When purchasing a new SCOTT bicycle from an authorized SCOTT dealer, SCOTT grants a manufacturer’s guarantee subject to the following provisions.

CONDITIONS
The manufacturer’s guarantee is only granted to the first-time buyer of a SCOTT bicycle who has purchased it from an authorized SCOTT dealer. The manufacturer’s guarantee only applies if the bicycle is registered to the first buyer at www.scott-sports.com within ten days of purchase.

DURATION
The manufacturer’s guarantee is granted from the date of purchase for a period of five years on bicycle frames and rear ends. The guarantee period is reduced to three years, if the SCOTT bicycle is not serviced at least once a year by an authorized SCOTT dealer. Maintenance services must be carried out in accordance with the maintenance instructions in the SCOTT manual and must be confirmed there by the stamp and signature of the authorized SCOTT dealer.
For frames and rear ends of Category 5 bicycle models and for rigid forks manufactured by SCOTT, the duration of the manufacturer’s guarantee is limited to two years.
If a defect on the SCOTT bicycle is remedied within the scope of a manufacturer’s guarantee or a warranty claim, the duration of the manufacturer’s guarantee is not extended. The manufacturer’s guarantee ends, when the first-time buyer transfers ownership of the SCOTT bicycle to a third person.

ASSERTION
The manufacturer’s guarantee is provided by SCOTT Sports SA, Route du Crochet 11, 1762 Givisiez, Switzerland. The buyer must inspect the SCOTT bicycle immediately after purchase and notify his authorized SCOTT dealer at once in writing of any obvious defects. Hidden defects must be reported immediately after their discovery. In the event of a guarantee claim, the SCOTT bicycle must be handed over to an authorized SCOTT dealer. The latter will contact SCOTT to remedy the defect. The assertion of a guarantee claim always requires the presentation of the original proof of purchase as well as the proof of maintenance service in the SCOTT manual.
Performance of SCOTT in the event of a guarantee claim
In the event of a guarantee claim, SCOTT will, at its own discretion, repair the defect or replace the defective product with a product of similar quality, whereby colour and model deviations are possible. If a repair or replacement is not possible, a purchase price refund will be made taking into account previous use. SCOTT is entitled to commission third parties to remedy the defect.

LIMITATIONS
The manufacturer’s guarantee applies exclusively to frames, swingarms and rigid forks of SCOTT bicycles. Bicycle components are excluded from this manufacturer’s guarantee.
The manufacturer’s guarantee does not apply to normal wear and tear, damage caused by accidents or other excessive force on the SCOTT bicycle, corrosion, improper maintenance, incorrect assembly and assembly of unsuitable components or accessories as well as cosmetic defects, for example in the varnish.
The manufacturer’s guarantee does not apply to SCOTT bicycles that have been used in a rental shop.

MISCELLANEOUS
These manufacturer’s guarantee provisions apply to all SCOTT bicycles as of model year 2023. Statutory warranty rights of the buyer and guarantees of component manufacturers (Shimano, SRAM etc.) remain unaffected by this manufacturer’s guarantee.
The place of jurisdiction for all disputes in connection with this manufacturer’s guarantee is Freiburg, Switzerland. This manufacturer’s guarantee is subject to Swiss law to the exclusion of all legislation that refers to foreign law.

© SCOTT Sports SA 2022. All rights reserved.
The information contained in this manual is in various languages
but only the English version will be relevant in case of conflict.
P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | BelgiumDistribution: SSG (Europe) Distribution Center SA SCOTT Sports SA | 11 Route du Crochet | 1762 Givisiez | 2022 SCOTT Sports SA www.scott-sports.com Email: webmaster.marketing@scott- sports.com

References

• sports.com
• scott-sports.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>