EPOMAKER CIDOO V65 Mechanical Keyboard User Manual
- June 9, 2024
- EPOMAKER
Table of Contents
V65 Mechanical Keyboard
User Manual
CIDOO V65 Mechanical Keyboard
Cidoo VIA Wired Bluetooth Dual Mode Aluminium Mechanical Keyboard A Customizable Keyboard that Supports VIA Software
Thank you for purchasing your Cidoo V65 Mechanical Keyboard . We hope you ‘re
enjoying it so far . If you ‘ve landed here . you probably want to take full
advantage of the keyboard’s features so you ‘ve come to the right place.
We’ll start with the basics, then we’ll move on to complete custom
configuration .
THE BASIC
Default Hot Keys
Hold FN + listed keys to activate
LED keys
FN+↑: LED backlight brightness Increase
FN+↓: LED backlight brightness decrease
FN+←: LED backlight speed decrease
FN+→.: LED backlight speed increase
FN+ \I: LED toggle On/Off
FN+] }: Toggle LED backlighting mode
FN+P: LED hue increase
FN+:: : LED hue decrease
FN+ { [ LED saturation increase
FN+1″ : LED saturation decrease
FN+Backspace: Long press
FN+Backspace for 3 seconds to reset the keyboard to the factory setting
Media Keys
FN+A: Windows System
FN+S: Mac System
Fn+1: Fl
Fn+3: F3
Fn+5: F5
Fn +2: F2
Fn +4: F4
Fn+6: F6
Fn+7: F7| Fn+9: F9
Fn+- : F11
Fn+Esc
Fn+8: F8
Fn+0: F10
Fn+ =+: F12
---|---
USB Wired/BT5.0 Dual Mode Pairing Method:
Wired Mode
Please insert USB cable into your computer. the keyboard backlight lights on
and turns to the default of RGB backlight effect, it means connection
successful.
Bluetooth® Pairing Instructions:
Perform the following steps to pair this keyboard with your device(s).
- This Bluetooth keyboard can be paired with up to three devices at the same time. Power on keyboard . (Close to USB port is OFF. Reverse direction is ON) .Press and hold the FN and Z / or FN and X . or FN and C keys for 3-5 seconds. When Z/X/C starts flashing. the keyboard is ready to connect.
- Open the Bluetooth settings on your device and scan for available devices.Locate and select one of BT device name entry. -CIDOO V65-l” for FN+Z; “CIDOO V65-2″ for FN+X: -CIDOO V65-3” for FN+C.
- Once the keyboard has connected to your device, the Z/X/C key will cease flashing. indicating that Bluetooth pairing was successful. Short press “FN” and “Z” or -FN” and “X” or “FN- and “C” keys to s’Mtch paired Bluetooth device.
FN+Space : Short press “FN” and “SPACE” key, will disconnect Bluetooth mode and switch to USB wired mode.
The Bluetooth connection has memory . It will disconnect when power off the keyboard and the keyboard will re-connect to the last device when power on the keyboard again.
Auto sleep mode
After 5 minutes without a keypress. the backlighting will turn off to conserve
battery. Any keypress will be awaken the keyboard.
After 30 minutes without a keypress. the keyboard will entry deep sleep under
Bluetooth mode. Bluetooth disconnect, any keypress will reconnect the keyboard
Battery Charging:
FN key will blink red repeatedly when the keyboard is low on battery (battery
voltage less than 3.5V). It is always red light when charging. it’s turns to
the default RGB backlighting after charging finished.
CUSTOM CONFIGURATION
How do I configure my keyboard ?
Cidoo V65 support VIA firmware to remap the keys .VIA is a software that
allows you to configure your keyboard.
Note :Please make sure your keyboard has been correctly plugged in your
computer device.
VIA setup instructions are here :
- Please visit “https://github.com/WestBerryVIA/via-releases/releases” to download the latest VIA application for your computer’s OS here.
- Download CIDOO V65 json file via WWW.CIDOOO.COM and load the file.
- Installation is completed and VIA software connected successfully if show below picture.
If the VIA software cannot recognize your keyboard, please reach out our
support to get the instruction.
VIA automatically detects your compatible keyboard if it’s plugged in.
Keyboard memory is persistent, which means that wherever you plug in keyboard,
it remembers the settings.
On the top half of VIA software, choose one key by your mouse, and then select
the key that you wanted on the bottom half of VIA software, and it was
effected. Firstly switch to VIA software key tester table, there is not any
background color before you press any keys, when you want to test
this key you have programmed, press it and the background color will change to
red color means it works, otherwise it is not work.
See below for more information about configuration
Macros setting
CIDOO V65 does not have physical multimedia keys, you can remap the keys
through the VIA software to achieve the function. CIDOO V65 is configured with
4 layers from 0 to 3 by default, and each individual key can have multiple
functions. This is important for smaller keyboards, where there aren’t enough
physical keys to do all the functionality you need.
Special keys setting
Here you can remap the key to replace the special key to the key you want, to
achieve the quick operation of the function.
CIDOO V65 VIA software provides many different RGB lighting effects by
default. You can change the lighting brightness, speed, color and customize
the lighting effect you want. You can also change the key to operate the
lighting effect you set.
Others custom
CIDOO V65 provides other customized remap to other functional keys.
About Layers
Layers allow you to configure your keyboard with more behaviours than its
number of physical keys.
CIDOO V65 default customized 0-3 layer keyboard layout.
Layer 0: This layer will be activated when your keyboard connected to the
Windows system.
Layer 0: This layer will be activated when your keyboard connected to the
Mac system.
Left Alt=Left Option Left Win=Left Command Right Alt= Right Option
Layer l: This layer will be activated when your keyboard’s system toggle switched to Windows or Mac and press Fn1(3) key.
Layer 2: This layer will be activated when your keyboard’s system toggle switched to Windows or Mac and key mapped any keys to MO(2) and then press it.
Layer 3: This layer will be activated when your keyboard’s system toggle switched to Windows or Mac and key mapped any keys to MO(3) and then press it.
Key description
| Hue+ | Hue Increase | Sat+ | Light Saturation+ |
|---|---|---|---|
| RGB Md+ | RGB Mode Next | RGB Tog… | RGB Toggle |
| Win… | Windows Mode | Mac… | Mac Mode |
| Hue- | Hue Decrease | Sat- | Light Saturation- |
| BT1 | Bluetooth Device 1 | BT2 | Bluetooth Device 2 |
| BT3 | Bluetooth Device 3 | Bright+ | Back light Increase |
| Lock Win | Lock Windows Key | USB Mode | Switch to USB Mode |
| RGB SPD | RGB Speed Decrease | Bright- | Back light Decrease |
| RGB SPI | RGB Speed Increase | Fn1 (3) | Layer 1 will be activated when holding |
this key
MO(2)| Layer 2 will be activated when holding this key| MO(3)| Layer 3 will be
activated when holding this key
Shenzhen Cidoo Technology Co.,Ltd
Add.: 104, Building 26, Changchun Garden, Changchun Road,
Gongming Community, Gongming Street, Guangming District,
Shenzhen City, GuangDong Province, China
TEL.+86- 755-33922600
Website: (CIDOOO )
Executive Standard: GB14081-2010
Copyrights and statements: and other cidoo trademarks are owned by Cidoo
company ,and may have applied for registration. All other trademarks are the
property of their respective owners .and Cidoo is not responsible for any
errors that may appear in this product.
All pictures shown are for illustration purpose only and the characteristics
of the product may vary without prior notice.
http://weixin.qq.com/r/Z0QcBALEml-lrUZn9xF1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>