MOORE RACE CHASSIS MRC S197 Cage Kit Instructions

: June 9, 2024
: MOORE RACE CHASSIS

Table of Contents

We Strongly advise getting a copy of the 25.3 SFI book to refer to for
1| 1.625
OVERVIEWS
Main hoop lean back is 5 degrees.
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOORE RACE CHASSIS MRC S197 Cage Kit

We Strongly advise getting a copy of the 25.3 SFI book to refer to for

bar locations.

This guide is to be a supplement to common roll cage installation techniques. We are providing you with some measurements to help you set the bars where they need to go to fit other bars. All measurements are not provided. Make sure the car is level, front to back and side to side

Please Make sure all tubes are accounted for when you receive the pallet. MRC is not responsible for missing tubes after 48 hours from the time of delivery

Part Name	Die	Material	Length
46		75 0.049	18 7/16
50	1.0003.0	75 0.049	21 7/16
49		75 0.049	22 7/8
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
Gusset		1.00 0.058	10
4C		1.250 0.058	16 1/4
4C		1.250 0.058	16 9/16
40D		1.250 0.058	20 5/8
37 Rear	1.500 6.5	1.250 0.058	23 1/4
8B		1.250 0.058	23 9/16
8A		1.250 0.058	23 9/16
8B Rear		1.250 0.058	29 1/8
8A Rear		1.250 0.058	29 1/8
4C	1.250 5.5	1.250 0.058	30 3/4
37 Rear	1.500 6.5	1.250 0.058	33 1/8
37	1.5006.5	1.250 0.058	46 3/4
47B		1.500 0.065	9
47C		1.500 0.065	9 5/8
47A		1.500 0.065	9 13/16
47D		1.500 0.065	15
41A		1.500 0.065	22 7/8
16B Upper		1.500 0.065	26 7/16
17B Upper		1.500 0.065	26 7/16
45A		1.500 0.065	26 5/8
45B		1.500 0.065	27 5/16
16B Lower		1.500 0.065	28 3/16
17B Lower		1.500 0.065	28 3/16
42A	1.500 6.5	1.500 0.065	32 11/16
41B	1.5006.5	1.500 0.065	47 13/16
Forward Strut	1.500 6.5	1.500 0.065	72 5/16
Forward Strut	1.500 6.5	1.500 0.065	72 5/16
Tube front bar	1.500 6.5	1.500 0.065	81 7/8
6A		1.625 0.083	18

15/16

6B| | 1.625 0.083| 18

15/16

18| 1.625 6.5| 1.625 0.083| 20 1/4
18| 1.6256.5| 1.625 0.083| 20 1/4
6C| | 1.625 0.083| 21
9| | 1.625 0.083| 21 3/16
9B| | 1.625 0.083| 21 3/16
39| | 1.625 0.083| 21

15/16

39| | 1.625 0.083| 2115/16
40A| 1.6256.5| 1.625 0.083| 23 3/8
12B Cont| | 1.625 0.083| 30 7/8
12A Cont| | 1.625 0.083| 30 7/8
51B| |

1.625 0.083

| 36

13/16

51B| |

1.625 0.083

| 3613/16
13| 1.6256.5| 1.625 0.083| 44 1/2
7A| | 1.625 0.083| 49
7B| | 1.625 0.083| 49
15| | 1.625 0.083| 54 5/8

1| 1.625

6.5

| 1.625 0.083| 55 1/8
11| | 1.625 0.083| 55 3/8
16A| | 1.625 0.083| 57 1/8
16B| | 1.625 0.083| 57 1/8
2A| 1.625

6.5

| 1.625 0.083| 57 3/8
2A| 1.625

6.5

| 1.625 0.083| 57 3/8
12B| 1.6256.5| 1.625 0.083| 59 1/2
12A| 1.6256.5| 1.625 0.083| 59 1/2
Main Hoop| 1.6256.5| 1.625 0.083| 132 1/16

OVERVIEWS

Main hoop lean back is 5 degrees.

-The below dimensions are to the middle of the tube.
-These are the most critical dimensions and should be followed strictly to ensure a proper fit.

This covers most critical dimensions. If there is anymore you need or want to double check. Please feel free to reach out to us.

Warranty: There is no warranty stated or implied due to unusual stresses placed on race cars and components because we have no control over how they are maintained and used. Moore Race Chassis and fabrication LLC accepts no liability for failures of racing products manufactured or sold by MRC. The customer accepts all risks involved with racing and hazards thereof, MRC makes no claims nor does it intend for it’s products to be used on street driven vehicles.

MRC S197 25.3 Cage Kit with standard down bars
Thank you for choosing MRC for your cage kit!
We hope we made this as painless as possible.
If there are any questions this sheet doesn’t cover, please contact us by phone, Email or Facebook Messenger.
Phone – (636) 791 1541
Email – info@Mooreracechassis.com