TFA 60.2031.10 Digital Travel Alarm Clock Instruction Manual

: June 9, 2024
: TFA

TFA 60.2031.10 Digital Travel Alarm Clock

Instruction manuals
www.tfa-dostmann.de/en/service/downloads/instruction-manuals

ASSEMBLY INSTRUCTION

Digital travel alarm clock with vibration Thank you for choosing this product from TFA.

Before you use this device

Please make sure you read the instruction manual care-fully.
The operating instructions are enclosed with the device or can be downloaded at
www.tfa-dostmann.de/en/service/downloads/instruction-manuals
This product should only be used as described within these instructions.
Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use. We shall not be liable for any damage occurring as a result of non-following of these instructions.
Please pay particular attention to the safety notices!
Please keep this instruction manual safe for future reference.

Digital travel alarm clock with vibration

Delivery contents

Digital alarm clock
Instruction manual

Range of application and all the benefits of your new instrument at a

glance

Alarm clock optionally with vibration and/or alarm sound for a guaranteed waking up
Ideal for people with hearing impairment and for heavy sleepers
Snooze function
Backlight on keypress
Robust and compact
Stable, foldable stand also serves as a key lock
Ideal as a travel alarm clock

For your safety

This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.
Unauthorized repairs, alterations or changes to the product are prohibited.

Caution! Risk of injury!

Keep this device and the batteries out of reach of children.
Small parts can be swallowed by children (under three years old).
Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
Low batteries should be changed as soon as possible to prevent damage caused by leaking. Make sure the polarities are correct. Never use a combination of old and new batteries together, nor batteries of different types.
Remove the batteries if the device will not be used for an extended period of time.
Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact, immediately rinse the affected areas with water and consult a doctor.

Important information on product safety!

Do not expose the device to extreme temperatures or shocks.
The product must not come into contact with water or moisture. Suitable for indoor use only.
Clean the device with a soft damp cloth. Do not use solvents or scouring agents.

Elements

A: Display (Fig. 1):

A 1: Time
A 2: Battery symbol (for display function)
A 3: Symbol alarm sound activated
A 4: Alarm time
A 5: Symbol vibration activated
A 6: Snooze symbol
Digital travel alarm clock with vibration

B: Buttons (Fig. 2):

B 1: ALARM SET button
B 2: Alarm sound ON/OFF switch
B 3: – button
B 4: SNOOZE LIGHT button
B 5: + button
B 6: Vibration ON/OFF switch

C: Housing (Fig. 2+3):

C 1: Battery compartment
C 2: Support for free-standing
C 3: Support for key lock

Getting started

Lift up the stand and open the battery compartment. Insert three new AA 1.5 V batteries, polarity as illustrated. Close the battery compartment.
The device will alert you with a beep and all LCD segments will be displayed for a short moment. The device is ready for use.

Settings

Press and hold the + or – button in setting mode for fast mode.
The device will automatically quit the setting mode if no button is pressed for 20 seconds.

Time setting

Press and hold the ALARM SET button in normal mode for three seconds.
24 Hr (default) will be flashing. Press the + or – button to choose 12 Hr or 24 Hr system. In the 12-HR system AM (before noon) or PM (after noon) appears on the display.
Confirm the setting with the ALARM SET button.
The hour digit will be flashing. Press the + or – button to adjust hours.
Confirm the setting with the ALARM SET button. Set the minutes in the same way.
Confirm the setting with the ALARM SET button.
The display shows the current time.

Alarm functions

Alarm time setting

Press the ALARM SET button briefly in normal mode to enter the alarm setting mode. The hour digit will be flashing (default 7:00). Press the + or – button to adjust hours.
Confirm the setting with the ALARM SET button. Set the minutes in the same way.
Confirm the setting with the ALARM SET button.
The adjusted alarm time appears on the display.

Activate and deactivate the alarm functions

To activate/deactivate the respective alarm function, move the alarm sound ON/OFF switch and/or the vibration ON/OFF switch to ON or OFF.
The corresponding alarm symbol appears/disappears on the display.

Digital travel alarm clock with vibration

Wake-up process

When the alarm is activated, the alarm starts to ring and/or to vibrate when the set alarm time is reached. The alarm time flashes and the backlight will turn on for 20 seconds.
Press briefly any button (except SNOOZE LIGHT) or press and hold the SNOOZE LIGHT button and the alarm functions will stop. If the alarm is not stopped manually, the vibration and/or the ascending alarm tone automatically turn off after two minutes and it will be reactivated at the same set time on the following day.
The alarm symbols remain on the display.
When the alarm rings and/or vibrates, press the SNOOZE LIGHT button and the snooze function is activated. The snooze symbol flashes on the display.
The alarm will be interrupted for 5 minutes.

Digital travel alarm clock with vibration

Press briefly any button (except SNOOZE LIGHT) or press and hold the SNOOZE LIGHT button and the snooze function will stop.

Display light

Press the SNOOZE LIGHT button. The backlight turns on for 5 seconds.

Support/key lock

The foldable stand also serves as a key lock and protects against unwanted activation of the device.
If you fold the support up, all buttons (except SNOOZE LIGHT) are locked. For table standing fold the support down.

Battery replacement

The battery in the upper battery compartment powers the dis-play.
The remaining two batteries power the alarm functions.
When the display function starts to fade, the battery symbol appears on the display.
Please change all three batteries 1,5 V AA.

Troubleshooting

Problem : Solution

No display
- Ensure the batteries’ polarities are correct
- Change the batteries
Incorrect indication
- Change the batteries
Alarm clock does not ring/vibrate
- Activate the function by moving the switch

If your device fails to work despite these measures, please contact the retailer where you purchased the product from for advice.

Waste disposal

This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.

Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
This product must not be disposed of in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible dispos-al. The return service is free of charge. Observe the current regulations in place!

Disposal of the batteries
Never dispose of empty batteries and rechargeable bat-teries with ordinary household waste. They contain pollutants which, if improperly disposed of, can harm the environment and human health.

As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment. The return service is free of charge.
The symbols for the contained heavy metals are:
Cd=cadmium, Hg=mercury, Pb=lead.

Specifications

Power consumption
- Batteries 3 x AA 1,5 V (not included)
  Use alkaline batteries
Vibration alarm
- 2 seconds vibration,
- 2 seconds pause
Alarm sound
- Rising alarm sound (crescendo) 3 x 20 seconds,
  after 60 seconds maximum volume
Dimensions
- 79 x 28 (35) x 74 mm
Weight
- 86 g (device only)

No part of this manual may be reproduced without written consent of TFA Dost- mann. The technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.
www.tfa-dostmann.de
E-Mail: info@tfa-dostmann.de
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, 97877 Wertheim, Germany