LiftMaster 041-0347-000 Camera Service Kit Replacement Instruction Manual

June 9, 2024
LiftMaster

LiftMaster logo

LiftMaster 041-0347-000 Camera Service Kit Replacement

Hardware

  • Screw Qty. (3)
  • Decorative Badge
  • Camera

Tools

  • Phillips Screwdriver
  • Flat head Screwdriver
  • Ladder
  • Masking Tape (optional)

Introduction

Your camera is accessible at the opener’s bottom side. After installing the new camera, use your myQ® app to connect your new camera to your myQ® account.

WARNING
To prevent possible SERIOUS INJURY or DEATH:

  • Disconnect ALL electric and battery power BEFORE performing ANY service or maintenance.

CAUTION

  1. Using the myQ app,delete the garage door opener from the myQ account before re-adding the opener and camera the myQ account.

  2. Disconnect power to the garage door opener, and remove the backup battery, if used.

  3. Using a flat head screwdriver,remove the badge at the opener’s bottom. Badge is held in by four clips, pull badge off.

  4. Unscrew the camera slowly from the opener housing by removing the three screws with a Phillips screwdriver.
    TIP: Use masking tape to hold the camera in place as you remove screws.

  5. Remove the two-pronged wire harness with the black and white wires.

  6. Open camera and remove the three-pronged wire harness that has the black, green, and white wires. Rotate the connector clip backward before removing the wire harness.

  7. Open new camera and place the three-pronged wire harness that has the black, green, and white wires. Rotate connector clip back into place after reconnection. Close camera.

  8. Connect the two-pronged wire harness that has the black and white wires.

  9. Align screw holes and place camera into garage door opener. Fasten the three screws with a Phillips screwdriver.

  10. Reattach the new badge.
    Reconnect power andbattery, if used.

  11. Locate the notch in the camera’s opener and pull down.

  12. Follow the myQ® App instructions to add the new camera to your myQ® account.

Camera LED Status Indicators

LiftMaster-041-0347-000-Camera-Service-Kit-
Replacement-10

Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Wi-Fi® es una marca comercial registrada de Wi-Fi Alliance.
Wi-Fi® est une marque déposée de Wi-Fi Alliance
© 2022, Chamberlain Group, LLC.
All Rights Reserved.
Todos los derechos reservados.
Tous droits réservés.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LiftMaster User Manuals

Related Manuals