WOOX R9045 Outdoor Wireless Security Camera User Guide

: June 9, 2024
: woox

Table of Contents

WOOX R9045 Outdoor Wireless Security Camera
Package includes
Specification
Introduction
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WOOX R9045 Outdoor Wireless Security Camera

Package includes

Smart Outdoor camera x 1
USB cable x 1
User manual x 1
Screw bag x 1
Security sticker x 2
Rechargeable battery x 2

Specification

Batteries: 2×18650 2600mAh Rechargeable batteries(included)
Battery lifetime: approximate 4 months Resolution: 1920x1080P
IR distance: up to 7 meters
Angle of View: 120°
Audio input: Built in Mic
Audio output: Built in speaker
Two-way talk: support
Motion detection: support
Micro SD card: Max. 128G (not included) Network: IEEE 802.11 b/g/n 2.4GHz Wi-Fi Waterproof: IP65
Working temperature: -20℃ – 55℃
Working humidity: 10%-95%RH, no condensation Dimension: 115x95x64mm

Introduction

WOOX Smart Outdoor Camera is a Full HD 1080P security camera with features including two-way audio, motion detection, night vision, local and cloud storage, , IP65 waterproof, works with Echo Show and Google Nest Hub, and more.

Requirement to use

Woox home app
WLAN-enabled router: 2.4GHz (Separate band)

Installation

Please put the flip switch to “open” position and open the cover, then take out the insulation sheet from battery compartment. If you wish to install a MicroSD card now, please take out the left battery first. Hold and press the reset button until you hear the “system reset” prompt from the camera.
Rotate and open the base
Screw fixed to the wall
Rotate and close the top cover of the base and install the device.

Set up the smart outdoor camera with WOOX Home app

Download and install the app “WOOX Home” from Apple App Store or Google Play Store on your mobile device.
Launch the app “WOOX Home”.
Create a new account or log in to your existing account.
Tap “+” to add the device.
Select the applicable product type from the list of products.
Ensure the indicator light is quick flashing (flashing 2 times per second). If the indicator light isn’t flashing: hold and press the reset button on the bottom of camera until the indicator light starts to flash.
Confirm the Wi-Fi network and password.
Note: only 2.4GHz WiFi is supported.
The App will prompt you to scan a QR code that needs to be read by the camera in the smart outdoor camera to initiate pairing, press continue on the App and a QR code should now be generated to pair the product to your account. Position your mobile or tablet device in front of the camera lens and ensure the QR code is in full frame of view, once you hear the sound prompt confirm this on the App, this will commence the final stage of pairing the smart outdoor camera to your account.
The app will now search for the device and register it to your account.
Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.