ACEBEAM E70mini EDC flashlight User Manual
- June 9, 2024
- ACEBEAM
Table of Contents
High-CRI E70mini EDC flashlight
User Manual
FEATURES
- Compact size combined with high performance make the E70 MINI ideal EDC Flashlight
- Diminutive and finely crafted
- Utilizes 3 x the latest popular high CRI Nichia 519A LED for a maximum output up to 2000 lumens
- The high CRI>90 Nichia 519A LED,produces a uniform and smooth spot with no artifacts, capability revealing every detail on objects
- Neutral white (5000K)uniform spot reducing chances of misdiagnose
- Powered by 1×18650 battery(Included) with max runtime 56 hours
- 5 Brightness levels and 2 special modes (Strobe and Ultra-Low) for various scenarios
- With a stainless steel clip can be attached to pockets
- Highly efficient circuit design(Non-PWM)
- Stylish double layers tube design for better grip and heat insulation
- Lockout mode and “double click to turn on” design prevents accidental activation
- Toughened ultra-clear mineral glass with dual-side anti-reflective coating ensures the highest optical efficiency and light transmittance
- Made of durable high-strength and oxidation-resistance aero grade aluminum
- Premium type HAIII hard-anodized anti-abrasive finish
- Tail stand-capable for use as a candle
- Impact resistance to 1 meter and waterproof to 2 meters submersible, All-weather applicable
SPECIFICATIONS
Size: 4.37″/111mm (Length) x 1.02″/26mm (Head Dia.) x 0.92″/23.4mm (Body Dia.)
Weight: 72g (2.53oz) without battery, 120g(4.23oz) with battery
INCLUDED
1×18650 rechargeable battery; 1xUSB-C Cable; 1xLanyard;
1xPocket clip; 2×0-rings; 1xWarranty card; 1xUser manual
TECHNICAL PARAMETER
FL1
STANDARD| Turbo| High| Mid2| Midi| Low| Ultra-Low| Strobe
---|---|---|---|---|---|---|---
| 2000-600
lumens| 900-600
lumens| 380
lumens| 170
lumens| 60
lumens| 20
lumens| 1000
lumens
| 40s+2h|
2min+
1h55min| 3h
15min| 7h| 19h| 56h| 2h
| 153m| 102m| 71m| 52m| 39m| 20m| 112m
| 5,875cd| 2,625cd| 1,275cd| 675cd| 375cd| 104cd| 3,150cd
Notice: The above mentioned parameters (tested with 1x ACEBEAM 18650 3100mAh battery) are approximate and may vary from flashlights, batteries, and environments.
OPERATING INSTRUCTION
ON: Double click the switch.
OFF: Single click the switch when the light is ON.
Mode Selection: When the flashlight is ON, press and hold the switch to
cycle from Low → Med1 → Med2 → High modes, loosen the switch at your selected
mode. Next ON will memorize the last mode you selected.
Turbo: Double click the switch when the flashlight is ON. Next double
click to exchange between Turbo mode and Memorized mode.
Strobe: Triple click to access Strobe mode regardless the flashlight is
ON or OFF.
Ultra-Low: When the flashlight is OFF, press and hold the switch for 0.5
second goes to Ultra-Low.
Lock: When the flashlight is OFF, press and hold the switch for 5
seconds, the flashlight will be Locked after 3 seconds’ Ultra-Low output. It
is useless for switch operation. Unlock: When the flashlight is Locked,
press and hold the switch for 3 seconds, the flashlight will be Unlocked and
light at Ultra-Low mode.
Ultra-Low and Turbo can not be memorized.
LOW-VOLTAGE WARNING
When the battery power is less 20%, the light will step down modes ( High →
Mid2 → Midi → Low → Ultra-Low ) automatically. When step down to Ultra-Low and
the battery voltage is lower 2.7V, it will turn off.
INSULATING FILM
Before first use, please remove the insulating film.
BATTERY
INSTALLATION
WARNING
- By using this device, you certify you have read the included User Manual and Warning Card and release the manufacturer and retailers from all liabilities.
- Please use in accordance with applicable laws and regulations.
- Keep out of reach of children.
- DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- DO NOT modify/disassemble the light, otherwise the user will be in charge of the all responsibility.
- When the flashlight is working on the high mode, the surface temperature can reach 50 C . Please switch off the flashlight temporarily or turn it to low mode.
- Please use turbo mode with caution. Turbo greatly reduces the turntime and leads to high temperature on the flashlight surface.
- DO NOT use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold.
- When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not reach the highest output.
- If the product is left unused or carrier and transported,please lock the button to avoid accidentally activating the flashlight.
- Please keep the front lens clean. Due to radiation ennergy, it may heat up foreign matter on the lens which can potentially cause damage.
- The battery can only be stored inside the product and charged with the included standard charging cable.
- Quality batteries with circuit protection will reduce the potential risk.
- Store the battery with care. Please store the battery in a dedicated box after being taken out of the product if the battery needs to be changed. Keep it in a being in normal use; We will replace it with the same model. If the model has been discontinued, customers will receive a product with similar or improved model.
USAGE AND MAINTENANCE
- Unauthorized disassembly may damage the light and void the warranty.
- Lubricate the threads with professional grade lubricant regularly.
- Please swap out the 0-rings regularly to maintain the water resistance level.
- Maintain and keep clean any contact surfaces of the flashlight with alcohol swab. This may prevent irregular flashes during use.
PRODUCT WARRANTY
- If the customer experiences any problems with an Acebeam product within 15 days of purchase, the dealer will replace that product.
- If an Acebeam flashlight fails during normal use within a period of 5 years (60 months) of purchase, the dealer will repair or replace the flashlight with the same or similar model.
- ACEBEAM Battteries, accessories and lanterns with built-in batteries are warranted for a period of one year (12 months) from date of purchase.
- The warranty does not cover damage or failure caused by: A. Rough usage or operation which does not comply with the user manual or product specifications. B. Unauthorized disassembly, repair or modification. Defects or damaged caused by factors out of Acebeam’s control. C. Battery leakage damaged products.
- If there are any questions about ACEBEAM products, please consider the warranty and contact Acebeam or your original Acebeam dealer for warranty return instructions.
Email: info@acebeam.com
DISCLAIMER CLAUSE
Acebeam is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
SHENZHEN ZENBON TECHNOLOGY CO., LTD
+86-0755-23036551
www.acebeam.com
info@acebeam.com
1/F, No.1 Building, Yijiayang Industrial Park, Dalang, Longhua, Shenzhen
518100, Guangdong, China
Copyright © 2022 ACEBEAM.
Powered by Shenzhen Zenbon Technology Co.,Ltd 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>