ACEBEAM Eyevision Healthy Headlamp H60 User Manual
- June 7, 2024
- ACEBEAM
Table of Contents
Light Where You Want It
User Manual
H60
Eyevision Healthy Headlamp
Features
- High Color Rendering Index (CRI >97) eye vision healthy headlamp
- Real full spectrum, can accurately reveal every subtle and color of an object like under natural light
- IEC62471 Exemption certification, zero blue ray damage(RGO), and extremely low violet light energy
- Can reduce+ eye fatigue and improves overall visual comfort
- Utilizes 8 SUNLIKE LEDs and 1 Osram LED
- Power by one 18650 battery(excluded), recommend using Acebeam ARC18650H-310A battery, which ensures the long runtime.
- Three LED modes can be toggled (All-on, Sunlike-on or Osram-on)
- Can be used as a mini flashlight
- TIR (Total Internal Reflection) optic facilitates efficient light transmission with a broad beam and a generous throw.
- Sweat-channeling, reflective headband
- Highly integrated single switch for all easy operation
- Aircraft-grade aluminum body structure
- Reverse polarity protection to guard against improper battery insertion
- The intelligent highly efficient constant circuit runs for a maximum of 888 hours
- Intelligent temperature controlled light output for user safety
Specifications
Size: 83mm(Length)x 32.2mm(head diameter)x 26mm(tube diameter) Weight: 57g without battery
Accessories
1x USB-C charging cable; 1x Headband with silicone holder; 2×0-rings; 1x User manual; 1 x Battery warning card; 1x Warranty card
Technical Parameter
ALL-ON| FL1
STANDARD| Turbo| High| Mid| Low| Ultra-Low| SOS
---|---|---|---|---|---|---|---
| 1250
lumens| 500
lumens| 180
lumens| 40
lumens| 3
lumens| 1250
lumens
| 2h 45min| 3h| 4h 15min| 20h| 11days| 3h
| 150m| 99m| 64m| 40m| ——–| ——–
| 5,625cd| 2,450cd| 1,024cd| 400cd| ——–| ——–
SUNLIKE LED| | 680
lumens
| 280
lumens
| 90
lumens
| 20
lumens
| 2
lumens
| ——–
| 3h 15min| 1h 30min| 9h| 40h| 14days| ——–
| | 76m| ——–| ——–| ——–| ——–
| 3,600cd| 1,444cd| ——–| ——–| ——–| ——–
OSRAM| | 570
lumens
| 220
lumens
| 90
lumens
| 20
lumens
| 1
lumen
| ——–
| 3h 30min| 3h 45min| 9h| 40h| 37days| ——–
| 150m| 99m| 64m| 40m| ——–| ——–
| 5,625cd| 2,450cd| 1,024cd| 400cd| ——–| ——–
Notice: The above-mentioned parameters (tested with 1 face beam 18650
3100mAh battery) are approximate and may vary from flashlights, batteries, and
environments. The Turbo output is measured in a total of runtime including
output at step-down levels due to temperature regulation or protection
mechanism.
Operation Instruction ON/OFF: Single click the switch Mode Selection: Single
click and hold the switch quickly to cycle from ALL-ON->SUNLIKE-ON—> OSRAM-ON
modes, regardless the flashlight is on or off.
Output Selection: When the flashlight is ON, press and hold the switch to cycle from Low >Mid > High, loosen the switch at your selected output. Next ON will memorize the last output and last mode you selected.
Turbo: Double click the switch to access Turbo output. The next double click will cycle between Turbo and memorized output.
SOS: Triple click to access SOS regardless the flashlight is ON or OFF.
Ultra-Low: When the flashlight is OFF, press and hold the switch for 0.5 seconds and go to Ultra-Low. Lock
When the flashlight is OFF, press and hold the switch for 5 seconds, the flashlight will be Locked after 3 times flashes. It is useless for switch operation.
Unlock
When the flashlight is Locked, press and hold the switch for 5 seconds, the flashlight will be Unlocked and light at Low output.
Ultra-Low, Turbo and SOS can not be memorized.
Low-Voltage Warning
When the flashlight flashes three times every five seconds, the battery is low, please replace the battery, or charge it in time.
Warning
- H60 is a high-intensity lighting device and is capable of causing eye damage. Avoid shining the light directly into the eyes to humans or animals.
- Applications must be treated with caution and handled with care.
- When the H60 is stored in a backpack or unused for an extended period, it is suggested to loosen the cap to cut off the power entirely to prevent the accidental activation of the flashlight.
Usage and Maintenance
- Do not disassemble the sealed head as doing so may cause damage to the headlamp and will void the warranty.
- Remove the battery from the flashlight if you will not be using the light for an extended period.
- Replace the 0-rings if they become stretched or damaged. Regularly lubricate the 0-rings.
- Clean the contacts of your light periodically.
There may be several reasons for a flickering or malfunctioning light.
Reason 1: The battery needs to be recharged or replaced.
Solution: Recharge or replace the battery
Reason 2: The PCB board contact or battery contacts are dirty.
Solution: Clean the contact points with an alcohol-soaked cotton swab.
If the above methods do not solve the issue, please contact your distributor and refer to the warranty policy.
Acebeam guarantees the flashlight against defects in material and workmanship. Flashlight products that are found to be defective under normal use within 5 years of the period of purchase date will be repaired or replaced without charge. This warranty does not cover damage caused by accident, unreasonable use, or product alteration. Failure to follow the general maintenance directions could result in damage to your flashlight that may not be covered by the Acebeam warranty.
Should this flashlight be proved defective, the product will be repaired or replaced under the above terms. Please contact Acebeam or your original Acebeam dealer for warranty return instructions.
SHENZHEN ZENBON TECHNOLOGY CO., LTD +86-0755-23036551
www.acebeam.com
4/F, 3rd Building, Yijiayang Industrial Park, Dalang, Longhua, Shenzhen 518100, Guangdong, China
Copyright © 2020 ACEBEAM.
Powered by Shenzhen Zenbon Technology Co., Ltd