ACEBEAM bk10 LED Bike Light User Manual
- June 5, 2024
- ACEBEAM
Table of Contents
ACEBEAM bk10 LED Bike Light
Features
- Utilizes a single 1 xCREE XHP35 HI LED with a lifespan of 50,000 hours
- Maximum output of 2,000 lumens
- Powered by one piece ACEBEAM IMR21700-510A rechargeable battery
- Convenient and fast micro-USS charging function
- Designed in accordance with STVZO standard
- 90% light transmittance PMMA lens to deliver homogenous spot light
- Rectangular beam spot focus the beam without dazzling for safety
- Aircraft grade aluminum body structure with Premium type III hard anodized anti-abrasive finish
- 5 brightness levels plus SOS special function
- SOS setting serves as a distress signal
- Intelligent highly efficient circuit board design for max performance and long run time
- Intelligent temperature controlled light output for user safety
- Compact size for easy-taking
- One switch for all easy operation
- IP65 rated protection for rain /splash proof and dust proof
- High-quality detachable rubber mat included for Improved shock resistance
Specifications
Size: 117.2mm(length)x 45mm(head diameler)x 28.4mm(tube diameter)
Weight: 110g w/o battery; 1829 w/ battery
Accessories
1xACEBEAM 21700 5100mAhbattery; 1xBike Mount; 1xHelmet Mount; 1xHelmet Moult
Adapk>f;
2×0-rings; 1xspeclficatlon; 1xBattery warning card; 1xWarranty card
Technical Parameter
Notice: The above-mentioned parameters (tested with ACEBEAM 1 x 21700 5100mAh
battery) are approximate and may vary from ffashllghts, batteries, and
environments.
Operation Instruction
Single Click:
when the light is at Unlock, single cliclc; for ON/OFF.
Long Press:
When the light is OFF, long press for 0.5 seconds access Ultra-low mode;
When the light is ON, long press goes to the memorized mode before cycling
from Low – Med – High mode.
Double Click:
when the light is at Unloclc;, Double Click to cycle between Turbo and the
memorized mode.
Triple Cliclc;: when the light is at Unlock, Triple Click access SOS.
lock & Unlock:
When the light is OFF, long press for 5 seconds to Lock;
When the light is Locked, long press for 5 seconds to Unlock and access Ultra-
Low mode.
Bicycle Installation Diagram
Helmet Installation Diagram
Charging
The built-in charging function charges IMR21700-510A through a micro-USS port. The built-in power indicator RED means in charging status, indicator GREEN means fully charged.
Battery Warning Indicator
When the voltage is above 3.ZV, the indicator is GREEN.
When the voltage is between 2.9V-3.2’/, the indicator is RED.
When the voltage is lower than 2.9V, the indicator is RED flash.
When the voltage is at 2.7V, the light is OFF.
Warning
- By using this device, you certify you have read the Included User Manual and Warning Card and release the manufactur8f’ and retailers from all liabilities.
- Please use in accordance with applicable laws and regulations.
- Quality batteries with circuit protection will reduce the potential risk.
- Do not aim this light directly at eyes or exposed skin to prevent injuries. Keep this flashlight out of the reach of children.
Usage and Maintenance
- Unauthorized disassembly may damage the light and void the warranty.
- This is nonnal case the light will accumulate a lot of heat when used on Turbo/output levels for extended periods. When the lamp reaches a temperature of 65°C or above, the lamp will automatical y step down a few lumens to reduce the temperature. When the temperature drops below 65°C, it will then allow the user for the reselection of the modes.
- Lubricate the threads with professional grade lubricant regularly.
- Please swap out the O-rlngs regularly to maintain the water resistance level.
- Maintain and keep clean any contact surtaces of the flashlight with alcohol swab. This may prevent irregular flashes during use.
- Remove batteries during storage. Keep lithium-ion batteries charges approximately every 4 months.
- This flashlight may not be used as diving light.
Product Warranty
-
If the customer experiences any problems with an Acebeam product within 15 days of purchase, the dealer will replace that product.
-
If an Acebeam flashlight fails during normal use within a period of five years (60 months) of purchase, the dealer will repair or replace the flashlight with the same or similar modal.
-
ACEBEAM Balllaries, accessories and lanterns with built-in batteries are warranted for a period of one year (12 months) from date of purchase.
-
Warranty one year (12 months) for magnetic charging products.
-
The warranty does not cover damage or failure caused by:
A. Rough usage or operation which does not comply with the user manual or product specifications.
B. Unauthorized disassembly, repair or modification. Defects or damaged caused by factors out of Acebeam’s control.
C. Battery leakage damaged products. -
If there are any questions about ACE BEAM products, please consider the warranty and contact
Ace beam or your original Acebeam dealer for warranty return instructions. Email: info@acebeam.com
SHENZHEN ZENBON TECHNOLOGY CO., LTD
+86-0755-23036551
www.acebeam.com
info@acebeam.com
4/F, 3rd Building, Yijiayang Industrial Park, Dalang,Longhua, Shenzhen 518100,
Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>