SelectBlinds Panel Track with Motorization Instruction Manual

SelectBlinds Panel Track with Motorization

Installation – Panel Track with Motorization

Read the instructions carefully before assembling and using the product. Assembling process can be completed by non-professionals. For indoor use only.

WARNING

• Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.

• To avoid strangulation and entanglement, keep cords out of the reach of young children.
  Cords may become wrapped around a child’s neck

• Move beds, cots and furniture away from window covering cords.

• Do not tie cords together.
  Make sure cords do not twist together and form a loop.

Control

Take care that the blind can move freely and is not blocked by objects.

Manual Remote control

WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.

WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

General information

Performances

ABC-01

• Battery CR2032 1.5V
• Channels 5
• Max. blinds per channel infinite
• Range (inside building) 20m, 2 concrete walls
• Frequency 2.4 GHz
• Weight 56 grams

Buttons

Changing the battery

Programming

To program a blind:

1. Set blind in program mode, chapter 2.1
2. Program the blind, chapter 2.2
3. Exit the program mode, chapter 2.1

Set a blind in program mode

Setting a blind in program mode can be done in three ways. If a blind is in program mode it will show a stepping motion. The blind can still be operated with the buttons. If a program action is confirmed, the blind stops stepping for 3 seconds. A blind will exit the program mode automatically after 4 minutes.

1. By hand: press the program button on the blind
   It is possible to set multiple blinds in program mode and program them simultaneously.

2. By remote: SingleSelect mode
   The SingleSelect mode is a patented method to set a blind in program mode by remote control. When a remote and blind are in SingleSelect mode, the blind can be operated, paired to one or more channels and programmed.
   Other blinds are disconnected from the remote, untill the SingleSelect mode has ended.

3. By remote: ChannelSelect
   ChannelSelect is a method to set all blinds that are paired in the same channel, into program mode.

Programming a blind

1. Pair a blind to a channel
   To pair a blind to a channel, the blind must be in program mode.
   See chapter 2.1 how to set a blind in program mode and exit program mode.

2. Pair multiple blinds simultanously to a channel or other remote
   To pair multiple blind simultanously to a channel or other remote, all blinds must be in program mode. See chapter 2.1 how to set a blind in program mode and exit program mode. Pairing multiple blinds simultanously to a channel is not possible for Singleselect

3. Set the favorite position
   To program a blind, the blind must be in program mode.
   See chapter 2.1 how to set a blind in program mode and exit program mode.

4. A. Switch the blind’s direction of rotation
   To program a blind, the blind must be in program mode. See chapter 2.1 how to set a blind in program mode and exit program mode.
   Example: when you press left/down on the remote and your blind moves to the right/up, you have to switch the rotation direction of the blind.

5. B. SingleSelect mode: Switch direction of rotation for panel and vertical blinds

6. Set blind in BatteryMode (Greenmode)
   To program a blind, the blind must be in program mode. Important: BatteryMode can be only turn on by using SingleSelect method, see chapter 2.1 how to set a blind in program mode en exit program mode by single select.
   The RF-unit in the blind forwards radio signals to increase the range of the remote.

Operating

Select a channel

Operate a blind

Press the buttons shortly for small movements, press the buttons for 2 seconds and the blind will move automatically. Press the stop/center button to stop the movement. Buttons

Remote Holder

Safety & Cleaning

Safety

WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

• Do not let children play with the blind and/or remote control
• Do not paint the device
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing the battery.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards.

Cleaning

Follow these general rules when cleaning the outside of the device and its components:

• Make sure the device is unplugged.
• Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
• Don’t use aerosol sprays, solvents, alcohol, or abrasives.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>