CALIBER RMD 577BT Car Radio with Folding Screen Bluetooth USB User Guide
- June 9, 2024
- CALIBER
Table of Contents
CALIBER RMD 577BT Car Radio with Folding Screen Bluetooth USB User Guide
CONNECTION DIAGRAM
BUTTONS AND CONNECTIONS
- Display: LCD screen
- Display: 7” TFT-LCD touch screen
- TILT: Press to open/close 7″ display.
- Power: Press to turn the unit ON When ON, press once to turn the display OFF (During TFT off, the video out signal will be available so that a connected extra monitor will keep showing the image/video) Press the button again to turn the display back ON Press and hold the button again to turn the unit OFF
- MOD: Press repeatedly to change the source mode
- Release: Press to disconnect the front panel 7/8. s/w: Cursor down/up. Press to set display angle
- VOL/SEL: – Rotate for volume adjustment or adjust settings Push to enter the audio menu
- IR sensor: Remote control IR sensor
- 12. FORWARD/BACK: Press to skip to next/previous song or change radio station
- USB: Standard USB port (max. 32GB)
- AUX: 3.5mm Jack-in
- Numeric: Preset stations 1 ~ 6
Note: Micro SD card reader (max. 32GB) – behind the front panel
SPECIFICATIONS
General: Power supply
Max power output RMS power output
Suitable speaker impedance Fuse Dimensions(WxHxD)
TFT LCD
Display resolution(dot) 800(W) x 480(H)
Screen size(inch) 7.0 (Diagonal)
Video output level
Composite: 1.0 • 0.2Vp-p
Load impendance: 75 ohms
USB/SD:
Video
Type: 16:9 and 4:3
Compatible: MPEG1/MPEG2/ MPEG4/DivX/WMA
System: PAL/NTSC
Audio
Compatible: MP3/WAV
System: 24bit/96KHz
Photo
Compatible: JPEG/BMP/GIF/ PNG/TIFF
Radio
FM Stereo Radio
Frequency range 87.5-108.0 MHz (Europe)
FM sensitivity 12dBu
Stereo separation 35dB (1 KHz)
AM(MW) Radio
Frequency range 522-1620 KHz (Europe)
Supports: A2DP and AVRCP profile
Range: up to 10 meters (without barrier)
Transmission: Freq range: 2402-2480 Mhz / Max e.r.p: <100mW/20dBm
Note: Specifications and the design are subject to change without notice due to improvements in technology.
Basic operations
Home screen
On the home screen you can choose the available modes (RADIO / USB / SD /
streaming function / AUX) or enter the SWC / EQ or SETTING menu.
Sound Control
-
Volume Turn the [VOL] button (9) to adjust the volume level.
-
Audio settings By pushing the [SEL] button (9) you will enter the audio menu and you can adjust BASS / TREBLE / BALANCE / FADER Etc. Push to choose and rotate to adjust.
Note: when an EQ preset is chosen the bass and treble control are not available. -
Other Audio Settings Settings like preset equalizer, loudness or subwoofer ON/OFF can be set by tapping the “EQ” icon on the main menu.
Setup
Enter the setup menu by tapping the [SETTING] icon on the main menu. Tap the
items you would like to set. You can adjust audio, date and time, language,
calibration, etc.
Radio operations
Band
Tap the onscreen [BAND] button to choose FM1, FM2, FM3, AM1 or AM2. On each
band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the 7 or 8 button to adjust seek the frequency
automatically. Tap the button to adjust the radio frequency manually step-by-
step.
Save preset stations
There are six numbered preset buttons on the screen (P1-P6), which can store
and recall stations for each band. Tune in to the station you want to store,
touch and hold any key from P1-P6 until you hear a beep. The station will be
saved in the designated number. After saving the stations, you can listen to
short intros of each preset by touching the [SCAN] button.
RDS
AF, TA, PTY are the RDS functions. Tap the onscreen buttons to turn these
functions ON/OFF.
Note: RDS might not be available in every country
Streaming function operations
Pairing
Activate streaming function on your mobile phone, and search for available
devices. Select “RMD577BT_CAL”. If successful connected the logo stays ON, if
not this logo keeps flashing.
Dial pad
Touch the dial pad to dial the number you would like to call. Touch the [CALL]
(green) button to send the number.
Call list
Displays your phonebook and call history, if you’ve given permission.
A2DP
Press the [MUSIC] button to enter the A2DP page to control playing music of
your cell phone using the onscreen controls (available if you device supports
A2DP).
Incoming calls
- Answer call: push the green horn at an incoming call
- End call: push the red horn
- Reject call: push the red horn at an incoming call
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start playing the
contents automatically.
Audio playback
To control the audio playback, use the onscreen buttons.
Image playback
Push the [SEL] button (9) to show the playback options
Folder/file list
To show the contents of the USB/SD, tap the 0 onscreen button to go back till
the file directory is shown. The files are divided into audio, movies and
pictures.
Remote control:
- q / MUTE: Standby (long press) Mute audio outputs
- MODE: Choose between AV-in/AUX/streaming function/ Radio/USB/SD
- MENU Settings
- ⇐ : Move cursor left
- BAND / TYPE: Choose between FM1, FM2, FM3, AM1 and AM2 / Select type
- Auto search / Previous track
- No. 0~6: Numeric buttons
- SUB-T: Subtitle on/off and language choice
- AUDIO: Change the audio output method
- OSD Statistical Disc Information Display Button in/de-creases brightness
- CLK: Shows clock on small display
- : Play / Pause
- ⇑ : Move cursor up
- ⇒ : Move cursor right
- ENTER: Select or enter
- : Auto search / Next track
- ⇓: Move cursor down
- INT Play intro’s
- RPT: Repeat
- VOL +: Volume increase
- APS: Automatic preset scan
- VOL – : Volume decrease
- SEL: Sound select key
WARNING
Points to observe for safe usage
- Read this manual carefully before using this disc and the system components. They contain instructions on how to use this product in a safe and effective manner. Caliber cannot be responsible for problems resulting from failure to observe the instructions in this manual.
WARNING
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
****Do not operate any function that takes your attention away from safely driving your vehicle. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident
****Keep the volume at a level where you can still hear outside noises while driving. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
****Do not disassemble or alter.
Doing so may result in an accident, fire or electric shock
****Use only in cars with a 12V volt negative ground.
(Check with your dealer if you are not sure.) Failure to do so may result in
fire, etc
****Keep small objects such as screws out of the reach of children.
Swallowing them may result in serious injury. If swallowed, consult a
physician immediately
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
Do not block vents or radiator panels.
Doing so may cause heat to build up inside and may result in fire.
Use this product for mobile 12V applications.
Use for other than its designed application may result in fire, electric shock
or other injury.
Halt use immediately if a problem appears.
Failure to do so may cause personal injury or damage to the product. Return it
to your authorized Caliber dealer or the nearest Caliber Service Centre for
repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe
stains, please dampen the cloth with water only. Anything else has the chance
of dissolving the paint or damaging the plastic.
Temperature.
Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C
(+32°F) before turning your unit on.
Maintenance.
If you have problems, do not attempt to repair the unit yourself. Return it to
your Caliber dealer or the nearest Caliber Service Station for servicing.
Caliber hereby declares that the item RMD 577BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS).
Old appliances and or batteries must not be disposed with garbage!
If the device battery can not be used anymore, every user is legally obliged to dispose of old appliances and or batteries separated from the garbage, e.g. at a collection point of his municipality/destrict.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>