Lenovo Ubuntu 22.04 Linux for ThinkStation P360 Tower Installation Guide

Table of Contents

Lenovo Ubuntu 22.04 Linux for ThinkStation P360 Tower Installation Guide
BRESSER 8810500 Metal Detector

The first step before installing Linux is to make sure the system BIOS is setup correctly.

Please refer to the following instructions and screenshots on how to install Ubuntu 22.04 LTS on the Lenovo Think Station P360.

Insert the Ubuntu 22.04 LTS installation media (either through USB or CD/DVD)
Power on the system and press the F12 function key whenever the following Lenovo splash screen appears.
Select the Linux bootable installation media from the F12 boot menu list.
Select “Ubuntu” from the GRUB boot menu and press enter.
Select the “Install Ubuntu” option on the welcome screen
Select the appropriate keyboard layout and language and press “Continue”.
Select “Normal Installation” and press “Continue”. Optional: “Install third-part software…”
Choose the installation type. For simplicity, this guide was done using
“Erase disk and install Ubuntu”
Select “Continue” to confirm changes will be made to the disk
Choose the appropriate geographical location and select “Continue”.
Fill out the appropriate information and select “Continue”.
Ubuntu installation progress bar will be shown
Once the installation completes, select “Restart now”.
Remove the installation media and press enter
User will land on the Ubuntu Desktop Screen.

To get optimal performance out of the Nvidia GPU, it is a good idea to install the Nvidia graphics driver.

To make sure the Nvidia GPU is working, open the terminal and write the command nvidia-smi.

In case Nvidia GPU is not native, follow the steps below to install the GPU driver:
Open Software & Updates.
Click on Additional Drivers
Select the driver you would like to install and click Apply Changes
After that system will ask to restart, click Restart.

In case you desire to install a specific Nvidia driver please follow the next steps:

Download the latest Nvidia graphics driver for the appropriate Nvidia GPU from www.nvidia.com/download
To get the Nvidia driver running, we will need to blacklist the nouveau driver. Follow the steps below:
- Log in as root:
- Blacklist nouveau driver by writing: blacklist nouveau
Run the command: update-initramfs -u
Reboot the system: reboot
- Once your system reboots, open a terminal window and:
- Log in as root: sudo su
- Run the command: apt-get update
Install gcc: apt-get install gcc
Install make: apt-get install mak
Install linux-headers: apt-get install -y linux-headers*
Stop x-windows by using the command: init 3
Log in as root and redirect to the directory where the Nvidia driver is
located.
Make the Nvidia installer an executable by the command- chmod +x
NVIDIA-Linux-x86-64-* And run the Nvidia driver by- ./NVIDIA Linuxx86_64-430.50.run
Select Continue installation
Wait until the kernel modules are completely built.
Select Yes for installing 32-bit compatibility libraries.
Wait until the installation is complete
Select Yes to run nvidia-xconfig utility to automatically update your X
configuration file.
Select OK once the X configuration file gets updated successfully.
Execute the following command to verify the Nvidia driver is loaded: nvidiasmi
Reboot the system.