Lenco SB-042LEDBK 86cm Bluetooth Soundbar User Manual
- June 9, 2024
- Lenco
Table of Contents
- Lenco SB-042LEDBK 86cm Bluetooth Soundbar
- PRECAUTIONS BEFORE USE
- Your BLUETOOTH SOUNDBAR
- Battery installation
- MODE
- Wall Mounted
- USING YOUR SOUNDBAR
- Troubleshooting
- Technical Specification
- Guarantee
- Disclaimer
- Disposal of the Old Device
- Service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lenco SB-042LEDBK 86cm Bluetooth Soundbar
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device, or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has a USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in the failure of data.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non-professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
If the product is delivered with power cable or AC power adaptor:
- If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
- Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
- Unplug this device during lightning storms or when unused for a long period.
- The socket outlet must be installed near the equipment and must be easily accessible.
- Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock. z Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
- Devices with class 2 construction do not require a earthed connection.
- Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
- Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
-
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:- “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
- [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. z Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
-
Caution about the use of Batteries:
- Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
- Battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitudes during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or that leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
- Unpack all parts and remove protective material.
- Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
Welcome
Thank you for choosing this product.
Each of our products have been carefully designed to be great at what they do
and this one is no exception. We hope you enjoy your new LED Bluetooth
Soundbar.
Your BLUETOOTH SOUNDBAR
In The Box
Carefully remove your BLUETOOTH SOUNDBAR from the packaging. Inside the box
you will find:
- LED Bluetooth Soundbar
- Multiple plug adaptors (both EU and UK plug)
- 3.5mm To RCA Cable
- Remote Control
- Instruction Manual
- Wall mounting bolts
If any of these items are missing, contact customer support.
Mains Power
Your BLUETOOTH SOUNDBAR requires a mains supply of 100-240V ~, 50/60Hz. Please
ensure that your mains supply is compatible before use.
Disconnect the Adaptor from the mains when not in use.
Position of Bluetooth Soundbar
Place on a flat, stable surface that is not subject to vibrations.
Avoid the following locations:
- Where it is exposed to direct sunlight
- Where it is close to heat-radiating sources
- Where the humidity is high and ventilation is poor
- Where it is dusty
Overview
Front View
- A SPEAKERS
Top View
-
: Press to turn on, press and hold to turn off. When powered on, press to switch modes.
-
: Press and hold to switch the LED lights on/off, and press to switch between the below modes.
- Light Mode: 1. breathing 2. circulate 3. white 4. red 5. purple 6. blue 7. Light blue 8. green
-
: Volume+.
-
: Volume-.
Back View -
DC IN: Connect the power adaptor here
-
OPTICAL IN: Connect to the compatible devices via an optical cable (cable not provided)
-
HDMI(ARC): Connect to the compatible devices via an HDMI cable (cable not provided)
-
USB IN: Connect a USB flash drive for playing MP3/WAV/WMA/APE/FLAC files (FAT32 format and 64GB max)
-
AUX IN: Connect to the compatible devices via the 3.5mm-RCA stereo jack cable (cable provided)
Remote Control
- Press to power on, press and hold to power off.
- Mode switching
- Mute/Unmute
- Volume Up
- Previous Track
- Next Track
- Play/Pause
- Volume Down
- Sound effect switching
- Restore factory settings (keep pressed)
- Choose Bluetooth mode
- Lower LED brightness
- Increase LED brightness
- Keep pressed to switch On/Off, press to cycle through lighting modes
Battery installation
Use remote control
The working range of the remote is +/-30° in both Vertical and Horizontal
Directions.
MODE
PLACEMENT
- Table Placement
Placement
Table placement
Place the soundbar on a solid surface.
Wall Mounted
USING YOUR SOUNDBAR
Power Connection
Connect to TV
Use the supplied remote control or the Soundbar On/Off button to choose input.
Note:
- Prior to usage, check whether your TV has HDMI ARC, Optical, and Aux Output.
- Prior to using the HDMI ARC connection, please ensure your TV supports HDMI ARC and HDMI Cable is not lower than HDMI 1.4.
- If there is no sound in optical mode turn on your TV PCM setting.
- 32 is the maximum volume of the soundbar.
Connect to Other Devices
If your device only has one 3.5mm output you will need to use a 3.5mm audio cable (not supplied).
Connect to Bluetooth Device
- Press the BT bE button and select BT mode or press the button on your remote control to switch to Bluetooth mode. The BT bE light will flash and you will hear ‘Bluetooth Mode, Pairing’.
- Pair your Bluetooth device and select “Lenco SB-042LED”. When successfully paired, you will hear ‘Connected’, and the BT bE light will stay lit. If your device requests a password, enter “0000”.
- The Soundbar will reconnect to the last paired device when switched on.
Troubleshooting
Problem | What to do |
---|---|
Soundbar does not respond (no power). | Check the mains power cable and make |
sure it is plugged into a suitable power outlet.
Check that the mains power supply is switched on. Connect the power to a different power outlet.
No sound.| Check the Soundbar volume control is not at a minimum.
Check that the Soundbar is not set to MUTE.
If you are connecting to the Soundbar using a headphones port on your external audio device then check the volume is turned up on that device.
The Remote Control does not work.| Replace the batteries.
Make sure there are no obstacles obscuring the Soundbar.
No sound in Bluetooth mode.| Check that the Soundbar is Paired with a Bluetooth device. If prompted enter the code ‘0000’.
Technical Specification
Model Number | Lenco SB-042LED |
---|---|
Lenco SB-042LED | 15V 2A |
Power Source of Remote Control | 2 x AAA size batteries (not supplied) |
Max. speaker output | 40W |
Speaker impedance | 4Ω |
Bluetooth Specification | V5.0 |
Frequency response | 140Hz—15KHz |
information about the AC adaptor | Value and precision |
--- | --- |
Manufacturers name or trademark, commercial registration and address |
Manufacturers name:
DONGGUAN LIYANG ELECTRICAL TECHNOLOGY CO., LTD. Address: Zone A,
2F, Building D, Chuangfu Industrial Zone Dakan Village, Huangjiang Town 523750 Dongguan City, Guangdong
Model Identifier| LY030SPS-150200V
Input voltage| 100-240~V
Input AC frequency| 50-60Hz
Output voltage| DC15V
Output current| 2A
Output Power| 40W
Average active efficiency| ≥86.95%
Efficiency at low load (10%)| ≥80%
No load Power consumption| ≤0.1W
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
- Important note: It is not possible to send products that need repairs to Lenco directly.
- Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation.
All items described in this guide are for illustration purposes only and may not apply to particular situations. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws of the requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
CE Marking
Hereby, Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands,
declares that this product is in compliance with the essential EU directive
requirements.
The declaration of conformity may be consulted via
techdoc@commaxxgroup.com.
Service
For more information and helpdesk support, please visit www.lenco.com Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>