Honeywell DT8016AF4 DUAL TEC Motion Sensor with Anti-Mask User Manual
- June 9, 2024
- Honeywell
Table of Contents
Honeywell DT8016AF4 DUAL TEC Motion Sensor with Anti-Mask
approved installation
Keep Clear
Not Included
EOL Settings
- factory default
Top View
- Side View
Zones
- Look-down
- Lower
- Intermediate
- Long
Please contact your local authorised Honeywell representative for product warranty information.
Approval Listings
EN50131-2-4:2008, Security Grade 3, Environmental Class II. Suitable for connection to an EN 60950 Class II Limited Power Source.
Note: In EN 50131-2-4 compliant installations, mount the sensor at 2.3m, do not use only the right side corner mounting holes, enable look down, set the microwave sensitivity to maximum and lock the sensor housing with the cover lock (see “[EN]” where noted in Steps 1-4).
IMPORTANT: The sensor should be tested at least once each year.
Honeywell Security Group – BP1219 1198 avenue du docteur Maurice Donat Sophia Antipolis 06254 Mougins Cedex.
- TEL: +33.4.92.94.29.50
- FAX: +33.4.92.94.29.60
For any additional information, please refer to our Website: http://www.honeywell.com/security/emea/hscdownload
- Tel: +44(0)1698 738200
- Email: UK64Sales@Honeywell.com
To protect the environment, a detailed installation guide is available on the Honeywell website – Please consider before printing the document!
2014 Honeywell International Inc. Honeywell and DUAL TEC are registered trademarks of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved. Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>