DIAMONDBACK 800 935 4002 Shim Kit Installation Guide
- June 9, 2024
- DIAMONDBACK
Table of Contents
SHIM KIT
DiamondBackCovers.com / 800 935 4002
INSTALLATION GUIDE
MISC-4
800 935 4002 Shim Kit
5 minutes
Normal install time| Keep an eye out for these icons:| IMPORTANT!
Important installation information| Helpful Hints
Tips to assist installation
---|---|---|---
PARTS INCLUDED:
800-935-4002-Shim-Kit-PARTS-INCLUDED.jpg" alt="DIAMONDBACK 800 935 4002 Shim Kit - PARTS INCLUDED" />
WHY A SHIM KIT?
If you place a heavy load at the rear of your Diamond Back HD, you may find it
difficult to open and close the tailgate. These shims take the load off the
tailgate so you can operate it even with heavy load on top.
INSTRUCTIONS
800-935-4002-Shim-Kit-INSTRUCTIONS.jpg" alt="DIAMONDBACK 800 935 4002 Shim Kit
-
INSTRUCTIONS" />
800-935-4002-Shim-Kit-INSTRUCTIONS-2.jpg" alt="DIAMONDBACK 800 935 4002 Shim Kit - INSTRUCTIONS 2" />- Open the tail panel of the cover.
- Place a shim onto each bed rail, tight against the inside of the tailgate.
- Close the cover.
- If the lock rods can no longer travel unimpeded past the bed rail lips, drop the tailgate and use a 7/16″ socket to lower the rod guide brackets and thus reposition the rods.
**** For best weather protection, make sure that in the closed position, the rods draw the tailgate panel down and compress its perimeter weatherstrip.
OCTOBER 2021
Documents / Resources
|
DIAMONDBACK 800 935 4002 Shim
Kit
[pdf] Installation Guide
800 935 4002 Shim Kit, 800 935 4002, Shim Kit
---|---