rocstor Y10A271-W1 140W Smart USB-C Adapter User Manual

: June 9, 2024
: rocstor

Table of Contents

rocstor Y10A271-W1 140W Smart USB-C Adapter
Features
Charging your device
Safety information
Certification and Compliance
Rocstor Warranty
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

rocstor Y10A271-W1 140W Smart USB-C Adapter

Use the Rocstor 140W USB-C Smart Power Adapter to charge your USB-C devices up to 140 W.

Features

Input : 100-240V / AC
USB-C Output : 140W (5V/3A.9V/3A,12V/3A,15V/3A,20V/5A,28V/5A)

Charging your device

Begin by connecting a USB-C cable to the power adapter and plug the adapter into a power outlet. Please note, DO NOT connect or disconnect the Rocstor 140W Smart Power Adapter with wet hands or if the adapter has been exposed to liquid.
Then proceed by connecting your device to the USB-C cable.

Note:

Rocstor recommends pairing this power adapter with your 16-inch MacBook Pro (2021 & higher) using a USB-C to Apple® MagSafe® 3 Cable to take advantage of fast charging.
Charging cable sold separately.

Safety information

WARNING: Please follow these safety instructions. Failure to do so may result in electric shock, fire, or other damages or injury. It is normal that the power adapter becomes warm during use. Please note that continuous contact with warm surfaces for extended time may cause discomfort or injury. In order to reduce the possibility of overheating or heat-related injuries, always allow needed ventilation around the Rocstor 140W Smart Power Adapter and use care when handling it. Avoid instances where your skin is in extended contact with a power adapter when plugged into a power source. It is not recommended to sleep with a power adapter when plugged into a power source. Avoid placing the power adapter under a pillow, blanket, or your body when connected to a power source. If you have a medical condition that affects your ability to detect heat against the body extra care should be used. Never use the power adapter in locations with water, such as a sink, bathtub, or shower stall. Never connect or disconnect the power adapter with wet hands. Unplug the Rocstor 140W Smart Power adapter under the following circumstances:

The USB-C cable or power prongs connected to the power adapter is bent, frayed or damaged.
The prongs, adapter case or the plug has become damaged.
The power adapter has sustained physical damage due to being dropped.
To clean your Rocstor power adapter.
The power adapter has been exposed to liquid damage, such as rain or moisture.
The power adapter does not charge and may require service or repair

Certification and Compliance

FCC Compliance
This device compliant with part 15 of the FCC Rules. Operation is subject to:

The device may not create hazardous interference.
The device must allow any interference that is incurred, inclusive of interference that results in unwanted performance.

This device has been tested and complies within the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. Providing safety against harmful interference with a residential installation or use. This device can render, use or radiate radio frequency energy, and incorrect installation as set forth in the instructions may cause damage to radio communications. Furthermore, there is no certainty that such interference will not occur in the installation process. In the event that such interference is experienced, troubleshoot by turning the device o ff and on. Additional steps to rectify the interference are:

Reestablish or change the antenna.
Expand the distance between the device and the receiver.
Attempt connecting the device to a different outlet that is different that which the receiver is connected to.
Contact technical support at Rocstor for additional assistance.

Any adjustments or conversions to this device is not Authorized by Rocstor and would Changes or modifications to this product would void the Electromagnetic Compatibility (EMC) and wireless compliance. This would prohibit you from using this device. It is necessary to use compatible peripheral devices and cables that are shielded to avoid interference with other electronic devices such as televisions and radios.