EPH CONTROLS TM-S Room Thermostat Instruction Manual
- June 9, 2024
- EPH CONTROLS
Table of Contents
EPH CONTROLS TM-S Room Thermostat
Installation Instructions
For use in normal environments.
The above image displayed is product TM3S, design of other products in the
TM_S range may vary.
Important: Keep this document
CAUTION!
Installation and connection should only be carried out by a qualified person
and in accordance with national wiring regulations.
- Before commencing any work on the electrical connections, you must first disconnect the thermostat from the mains.
- None of the 230V connections must be live until the installation has been completed and the housing is closed.
- Only qualified electricians or authorized service staff are permitted to open the thermostat.
- There are parts that carry mains voltage behind the cover. The terminal box must not be left unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
- If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.
- Prior to setting the thermostat, it is necessary to complete all required settings described in this section.
This thermostat can be mounted in the following way:
- Directly mounted on wall
EPH Controls Ireland
technical@ephcontrols.com
www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.com
www.ephcontrols.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>