MARMITEK Connect 350 UHD 2.0 HDMI Auto Switch User Manual

: June 9, 2024
: MARMITEK

Table of Contents

MARMITEK Connect 350 UHD 2.0 HDMI Auto Switch
Safety instructions
Introduction
Set content
Benefits
HDMI properties
Installation
Use
Frequently asked questions
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARMITEK Connect 350 UHD 2.0 HDMI Auto Switch

Safety instructions

Please read these instructions thoroughly before you use the device and keep them for future reference..

Only for indoor use.
Do not use the product in a damp environment or near water.
Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
Connect the adapter to the mains only after you have verified that the line voltage corresponds to the value specified on the type plates.
Never connect a power adapter if it’s damaged. In such cases, please contact your supplier.
Disconnect the AC/DC power adapter from the mains when this device is not in use for prolonged time.
Never open the product: the device may contain parts with deadly voltage.
Repairs or service should only be performed by qualified personnel.
Improper use, self-installed modifications or repairs will void any and all warranties.
Marmitek does not accept any product responsibility for incorrect use of the product or use other than for which the product is intended.
Marmitek does not accept liability for any consequential damage other than the legal product responsibility.

Introduction

Congratulations on your purchase of the Marmitek Connect 350 UHD
2.0™! It allows you to use 1 cable to connect 5 HDMI sources to your TV, without any loss of signal or encryption. It’s ideal when your TV doesn’t have enough HDMI inputs, or if you want to connect the devices to your TV using just one cable. Examples of HDMI sources are game consoles such as a PlayStation or Xbox, Blu-ray players, digital TV decoders and all other HDMI devices. The Connect 350 UHD 2.0™ supports Ultra HD (4k), Full HD (1080p), HDCP 2.2 and all 3D formats, making it suitable for all your existing and future equipment.
Marmitek products are manufactured with the utmost care and are exceptionally high quality. Please read this manual carefully and follow the instructions in order to get the best from this product.

Set content

1 x HDMI Switch
1 x Remote Control (battery included)
1 x IR Receiver
1 x USB Power Cable
1 x Power adapter
1 x User Manual

Benefits

Suitable for simultaneously connecting 5 HDMI devices to your TV
Switches automatically and/or with remote control
Includes separate IR receiver for operating the switcher when it is positioned out of sight

HDMI properties

The maximum throughput speed is 18 Gbit/s (gigabits per second). This allows HDMI 2.0 to display Ultra HD 4K images at 60 fps (frames per second).
Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160 / 60Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
Supports all 3D formats (suitable for use with your own 3D equipment)
Deep Color 36-bit (billions instead of millions of colours, better reproduction of subtle differences in gradation and a higher contrast ratio).
Supports Dolby Atmos and DTS:X and all other common audio formats.

Installation

Before installation:

Turn off all devices (TV and HDMI sources) before connecting them to the Connect 350 UHD 2.0™. If a device cannot be turned off, please remove the plug from the socket.
Only use High Speed HDMI® certified cables for the best picture and sound quality. Using too much force to connect or disconnect the HDMI cables may damage them.

$MARMITEK-Connect-350-UHD-2-0-HDMI-Auto-Switch-fig- $3$$

Use an HDMI cable to connect the HDMI sources (such as game consoles, Blu-ray players and Digital TV Decoders) to the HDMI ports marked “HDMI input”.
Use an HDMI cable to connect the TV to the HDMI port marked
“HDMI output”.
If required, connect the IR receiver to the “IR” input in order to continue to operate it when it is positioned out of sight, for example, in a closed cabinet. Remember to position the IR receiver itself within the remote control’s line of sight.
Use the USB power cable to connect the power adapter to the “DC 5V” connector and insert the plug into the wall socket.
5. Pull the plastic strip from the remote control’s battery compartment to activate the battery and remove the protective film from the top.

Use

Switching between connected HDMI devices

The Connect 350 UHD 2.0™ allows you to choose which HDMI source is displayed on the TV. If you turn on one of the HDMI sources, it will automatically switch to the correct input. If multiple HDMI sources are turned on, the Connect 350 UHD 2.0™ will automatically switch to the HDMI source that was activated last. If you want to select another HDMI source, please use the remote control or the “Select” button on the front.
Note : Automatic switching must be supported by the HDMI source. If it is not supported, you should manually select the appropriate HDMI source.

Frequently asked questions

No (or poor) image and sound
If you experience poor or no picture after connecting the HDMI switcher, please try to identify the problem by connecting the devices to your screen (TV, monitor or projector) one by one. This allows you to determine whether the problem is with the HDMI sources, the HDMI cables, the HDMI switcher or the screen.

For the best picture and sound quality, only use High Speed HDMI® certified cables.
Do not use cables longer than 15 meters, but preferably shorter cables. These reduce the risk of problems.
Check the HDMI cables and/or connectors for damage.
Both the HDMI source and your screen should fully support HDMI.
Check that your HDMI sources and screen support HDCP 2.2 (High Bandwidth Digital Content Protection) copy protection.

Do you have other questions that have not been resolved by the above information? Please go to www.marmitek.com

Technical data

Connections
- HDMI input 5x HDMI (19-pin female)
- HDMI output 1x HDMI (19-pin female)
- HDMI cable length max. 15 metres
Video
- Supported resolutions 480p, 576p, 720p, 1080i, 1080p and 2160p@60hz
- HDMI standards HDCP 2.2, CEC, EDID, DVI, all 3D formats, Deep Colour (36-bit), x.v.Color
- HDCP standards HDCP 2.2 and HDCP 1.4
- Colour formats RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2.
- Video Bandwidth 18 Gbps
- Clock frequency 600MHZ
Audio
- HDMI audio DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, LPCM 7.1, DTS, Dolby-AC3 and 2.0CH
Housing
- Dimensions (D x W x H) 87 x 60 x 19mm
- Weight 60g
Environment
- Ambient temperature +0 to +70° C
- Ambient humidity 10% to 85%
Power supply
- Power adapter input 100-240VAC @ 50/60Hz
- Output 5VDC / 1A

Specifications may change without prior notice

Environmental Information for Customers in the European Union and other European countries with separate collection systems. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product

Declaration of Conformity

Hereby, Marmitek BV declares that this Connect 350 UHD 2.0™ is in compliance with the essential requirements and other relevant provisions of the following Directives:
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits.
Directive (EU) 2017/2102 of the European Parliament and of the Council of 15 November 2017 amending Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down Ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009.
You can read the full Declaration of Conformity at http://www.marmitek.com

Copyrights

Marmitek is a trademark of Germatron B.V. Connect 350 UHD 2.0™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to ensure that the information in this manual is accurate. Marmitek is not responsible for printing or clerical errors. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Marmitek assumes no responsibility with regard to the performance or use of these products.
Marmitek BV – PO Box 4257 – 5604 EG Eindhoven
The Netherlands

20741/20200917 | Connect 350 UHD 2.0™ all rights reserved © MARMITEK
marmitek.com
stay connected