CWI LIGHTING 5005P40C Water Drop 14-Light Chandelier Instruction Manual
- June 8, 2024
- CWI LIGHTING
Table of Contents
CWI LIGHTING 5005P40C Water Drop 14-Light Chandelier
Tool & Required: Flathead screwdriver, Phillips screwdriver, pliers, wire
cutters, wire strippers, electrical tape, and safety glasses.
Light Source: (14) G9 40W Maximum(Not Include).
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning
installation. Check the package content list and diagrams below to be sure all
parts are present. If any parts are missing or damaged, do not attempt to
assemble, install, or operate the fixture. Contact customer service for
replacement parts.
Warnings and Cautions
- Turn off electricity at the circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
- These instructions are provided for your safety. II is very important you read them completely before installing the fixture.
- We strongly recommend that a licensed, professional electrician perform the installation.
- Disconnect the fixture from the power source before replacing the bulbs. Make sure bulbs are given sufficient time to cool before removal.
PACKAGE CONTENT
Hardware Contents
PART / DESCRIPTION /QUANTITY
- BB /Wire nut /2pcs
- cc /Screw /2pcs
INSTALLATION INSTRUCTION
-
STEP 1 – Release Crossbar from Ceiling Canopy .
-
STEP 2 Install Middle Rod, Ceiling Canopy to Fixture Body.
-
STEP 3 _ Attach Mounting bracket to Outlet Box
- A.Pass the supply wires through the Mounting bracket (EE). Attach the Mounting bracket (EE) to the Outlet Box with the head of the Green Ground
Screw facing you. Secure it with Outlet Box Screws (CC).
Tighten until snug
- A.Pass the supply wires through the Mounting bracket (EE). Attach the Mounting bracket (EE) to the Outlet Box with the head of the Green Ground
-
STEP 4 – Wire Connections
- A. Use standard wire connectors to make all wire connections. Twist connectors until wires are tightly joined together. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box
-
STEP 5 – Install Ceiling Canopy to Ceiling
-
STEP 6 – Install Crystal and Bulbs.
Released Date: 2018-04-09