CWI LIGHTING 9858P14 4 Light Up Mini Pendant Instruction Manual
- June 9, 2024
- CWI LIGHTING
Table of Contents
CWI LIGHTING 9858P14 4 Light Up Mini Pendant
Assembly Instruction Sheet #HS-9858P14
For Style 9858P14
- Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
- Light Source: (4) E12 60W Maximum(Not Include).
- Estimated Assembly Time: 10-20 minutes
- Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. IT any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact Customer Service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt. These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation. Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
Hardware Contents
STEP 1- Release Mounting bracket from Ceiling Canopy.
STEP 2 – Install Middle Rods.Ceiling Canopy to Fixture Body
STEP 3 – Attach Mounting bracket to Outlet Box
A.Pass the supply wires through the Mounting bracket (EE). Attach the Mounting bracket (EE) to the Outlet Box with the head of the Green Ground Screw facing you. Secure ii with Outlet Box Screws (CC).Tighten until snug.
STEP 4 – Wire Connections
A. Use standard wire connectors to make all wire connections. Twist connectors
until wires are tightly joined together. Wrap each connection with approved
electrical tape and carefully stuff all the connected wires into the Outlet
Box. 
STEP 5 – Install Ceiling Canopy to Ceiling
STEP 6 – Install Socket sleeve ,Glass and Bulbs.
- Released Date: 2019-03-26