seitron 040075 Programmable Thermostat Wifi Wi-Time Wall User Guide

June 9, 2024
seitron

040075 Programmable Thermostat
User Guide

seitron 040075 Programmable Thermostat Wifi Wi-Time
Wall

040075 Programmable Thermostat Wifi Wi-Time Wall

Touch buttons functionalities
Short pressure: cycles between operating modes Hourly Program, Manual, Manual Temporary,
Antifreeze/OFF.
Long pressure (5 s): changes the display mode (Minimal or Full)
Temperature increase
Temperature decrease
Quickly pressed in succession (10 s): enters the
Parameter Menu of the programmable thermostat
Display icons
Device in configuration mode: waiting for pairing
Wi-Fi connected
Heating mode On
Cooling mode On
Temperature regulation Economy mode
Temperature regulation Comfort mode
Permanent Manual Mode
Temporary Manual Mode (until 24)
Program mode
Antifrost mode
WARNING!

  • Before making any connections, make sure the mains power is disconnected.
  • Device installation and electrical connections must be carried out by qualified personnel and must comply with current normative standards.

INSTALLATION

  1. Cut off mains power.
    If a programmable thermostat is already present and it needs to be REPLACED, go to Point 2. If it is a NEW installation skip to Point 3.

  2. Unhook the old programmable thermostat from the wall and take a picture of the wirings: the power wires are usually blue and brown, the boiler control ones are usually black or gray.
    Once the wires are located, unplug them and remove the old programmable thermostat.seitron 040075 Programmable Thermostat Wifi Wi-Time Wall -
2

  3. Unhook and remove the front cover of the WiTime wall, from its plastic base underneath, applying pressure on the 2 clips located on the bottom side of the  rogrammable thermostat and lifting the cover towards the upper side.

  4. Connect the wires, passing them through the rectangular opening, as shown on the example of the boiler wiring:
    C: Common to Boiler
    NO: Normally open to Boiler
    L:  Live (Usually brown)
    N: Neutral (Usually blue)
    A B: Rete Modbus (Optional)
    S- S+: Remote room temperature sensor (Optional)seitron 040075
Programmable Thermostat Wifi Wi-Time Wall - 3For more wiring options, see the complete instruction manualseitron 040075 Programmable Thermostat Wifi Wi-Time Wall -
4

  5. Insert and fix the Wi-Time wall programmable thermostat to the wall using the provided screws.

  6. Place back the cover by first hooking it to the upper side of the plastic base (1) and then locking it to the lower side clips (2).

  7. Power up the programmable thermostat.

  8. The display shows the icon ‘ ‘, MAC address and the text ‘ PAIRING ‘ for about 30 minutes.

  9. Download the Seitron Smart App.

  10. Start the App, register the new user and login and complete the Wi-time wall configuration.
    Then pair the Wi-Time wall to the App.

  11. The wi-time wall automatically reboots; the device is connected to the Wi-Fi network and paired with the App.

TECHNICAL FEATURES

Type: Wall mounted programmable thermostat
Display: ePaper 2,13”
Power supply: 85..264 Vac 50..60 Hz
Power absorption: less than 2 W
Relay contacts ratings: max 3 A 250 Vac SPDT
Wi-Fi: 802.11 b/g/n
Modbus®RTU
Temperature adjustment range: +5.0..+40.0 °C
Operation mode heating/cooling
Weekly or manual programming
No-frost function
Settable Boost via App only (30-60-90 minutes)
Predisposition for a remote temperature sensor
Clock with buffer battery set via web
Protection rating: IP 30
Software class: A
Size: 120x80x24 mm
Thermoregulation class: V

WARRANTY

In the view of a constant development of their products, the manufacturer reserves the right for changing technical data and features without prior notice. The consumer is guaranteed against any lack of conformity according to the European Directive 2019/771/EU as well as to the manufacturer’s document about the warranty policy. The full text of warranty is available on request from the seller.
WIST03260ASE 040075 161122

Seitron Smart
Temperature under control

| seitron 040075 Programmable Thermostat Wifi Wi-Time Wall - QR
CODE1|
---|---|---
https://apps.apple.com/it/app/seitron-smart/id1473602699| https://play.google.com/store/apps/details?id=com.SE.AASW18&hl=it| https://appgallery.huawei.com/#/app/C102654517

Android and iOS Smartphone App

seitron 040075 Programmable Thermostat Wifi Wi-Time Wall - QR
CODE3 https://seitron.com/en/programmable-thermostat-wifi-wi-time-wall.html
Visitwww.seitron.com and download the full manual
CONTACT US

customer.care@seitron.it
TALK WITH US
+39 0424 567842

Documents / Resources

| seitron 040075 Programmable Thermostat Wifi Wi-Time Wall [pdf] User Guide
040075 Programmable Thermostat Wifi Wi-Time Wall, 040075, Programmable Thermostat Wifi Wi-Time Wall, Thermostat Wifi Wi-Time Wall, Wifi Wi-Time Wall, Wi-Time Wall, Wall
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals