OSD ICE600TTWRS Dual Tweeter Speaker User Guide
- June 3, 2024
- OSD
Table of Contents
OSD ICE600TTWRS Dual Tweeter Speaker
TOOLS NEEDED FOR INSTALLATION
- Pencil
- Drill
- Tape Measure
- Wire cutter
- Philips-head screwdriver
- Sandpaper
QUICK INSTALLATION GUIDE
- Where is the best place to install the speakers
- Where do the speakers sound the best?
- Try to separate the speakers 6 – 10 feet apart.
- When placing the speakers in the ceiling, try to install them so that the fixed 15° angle woofer is pointed towards the main listening area. (For LCR model only)
- If you intend to paint the grilles, try to do so before installation.
SPEAKER WIRE
To determine the length and the gauge of speaker wire, you will need to measure the distance between your receiver/amplifier to the speakers.
- Always buy more than you think you would need.
- Equal wire lengths should always be used to maintain an equal balance in sound volume.
- Sound quality is lost when using thin wire gauge over a long distance.
18AWG minimum – for distances up to ………………………. . 10 ft
16AWG – from ……………………………………………. 10 to 50 ft
14AWG – from …………………………………………… 50 to 100ft
CUTOUT TRACING
Trace along the inclusive template. Cut along the traced line using a drywall saw or rotary drill. A simple, inexpensive drywall saw (about $10 at your local hardware store) is the best choice for beginners. Caution: This is the most important part of the entire installation. If you are not certain whether any obstructions exist behind the desired mounting area, you should start by cutting a small hole in the center of your penciled mounting hole with a drywall saw. Use a piece of sandpaper to sand down the cut out edge for a smoother contour.
CONNECTION
Run the cable into the cut out location while leaving an extra two feet to make the connection to the speaker easier. Strip back approximately ½ inch of the speaker cable insulation and twist the copper wires tightly for easy insertion. On the back of the speaker, press down on the gold-plated compression terminal to reveal the “eye” and insert the speaker cable through the eye for secure connection. Release the compression terminal to lock each cable securely.
TWEETER ADJUSTMENT
Your in-ceiling speakers come from the factory with the tweeter facing straight out from the baffle. This will result in the overall smoothest response. However, you can adjust the tweeter to focus the sound at your listening location. In order to do this, gently press on the grill (See Diagram 3). Caution: Do not touch the tweeter dome while adjusting for your hearing preference. (See Diagram 2: Pivoting Tweeter Model Only.
MOUNTING DOG EAR
Tighten the dog-ear brackets by simply turning the screws on the speaker’s front baffle. Use a Phillips head screwdriver to turn the screws slowly clockwise. The quick-turn mounting system and frame will “sandwich” or clamp around the wall to hold the speaker securely in place. (See Diagram 3)
NOT APPLICABLE TO CERTAIN MODELS
TIP: Adjust the bass and the treble setting on your speakers by shifting the knob either to the left or right. Speakers positioned closer to a corner often produce more bass and will usually benefit with the tweeter switch in the +3dB position. Speakers located within a few feet of a listener’s ear will often sound better with the tweeter switch set to -3dB. Furthermore, rolled in insulation materials, such as a foam bedding would work as a dampening material and offer better acoustics. (See Diagram 4)
TIP : Blown-in insulation can sometimes work its way into the moving
components of the speaker, negatively impacting performance. It is best to
replace about a one square foot section directly behind the speaker with
rolled-in (bat) insulation. (See Diagram 5)
Note : The wire for both speakers should be about the same length. If one
speaker is placed closer to the amplifier than the other. Hide the excess wire
behind the wall
Amplifier/Receiver Considerations
Not all receivers/amplifiers can safely operate 2 pair of speakers at the same time. It is important that the amplifier or the receiver’s output wattage is comparable to the speaker’s power handling. Please refer to your owner’s manual for reference. When connecting any speakers to the amplifier or receiver, always make sure the power is off. Locate the connection terminals on the back of your receiver or amplifier. Always make sure to connect audio out from the back of your receiver or amplifier to the speakers. (See Diagram 6)
Note : Speaker terminals have corresponding (+) and (-) terminals. It is important to connect both speakers in phase. Out of phase will result in thin sound and weak bass.
WARRANTY & REPAIR
All OSD AUDIO speaker products have (10) year Limited Warranty against defects
in materials and workmanship. Proof of purchase must accompany all claims.
During the warranty period OSD AUDIO will replace any defective part and
correct any defect in workmanship without charge for either parts or labor OSD
AUDIO may replace returned speakers with a product of equal value and
performance. In such cases, some modifncations to the mounting may be
necessary and are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to
its written instructions, If necessary, repairs must be performed by OSD
AUDIO. The unit must be returned to OSD AUDIO at the owner’s expense and with
prior written permission. Accidental damage and shipping damage are not
considered defects, nor is damaged resulting from abuse or from servicing
performed by an agency or person not specifically authorized in writing by OSD
Audio
OSD AUDIO sells products only through authorized dealers and distributors to
ensure that customers obtain proper support and service. Any OSD AUDIO product
purchased from an unauthorized dealer or other source including retailers,
mail over dealers and online sellers will not be honored or serviced under
existing OSD AUDIO warranty policy. Any sale of product by an unauthorized
source or other manner not authorized by OSD AUDIO shall void the warranty on
the applicable product.
Damage to or destruction of components due to application of excessive power
voids the warranty on those parts. In these cases, repairs will be made on the
basis of the retail value of the parts and labor. To return for repairs, you
must email customer service at RMA@audiogeargroup.com for a Returned
Merchandise Authorization (RMA) numbert. The unit must be shipped to OSD AUDIO
at the owner’s expense, along with a note explaining the nature of service
required. Be sure to pack the speaker(s) in a corrugated container with at
least3 inches of resilient material to protect the unit from damage in
transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) Any products that have been altered or modified Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed Normal wear and maintenance.
Frequently Asked Questions
Can in-ceiling speakers be used outside?****
Although indoor speakers can be used outside, they are more susceptible to weather damage than equipment built for outdoor usage. Make sure to bring indoor speakers inside when not in use if you use them outside.
What is needed for ceiling speakers?****
An external amplifier that is wired via speaker cable to each ceiling speaker is required to power all of the ceiling speakers. The Sonos Amp is the greatest multi-room option, in our opinion.
Do ceiling speakers have to be enclosed?****
Yes. The sound quality of your in-ceiling speakers will be diluted if a back box is not installed, and this will cause noise pollution in other rooms in your house.
Are in-ceiling speakers worth it?****
Most inexpensive ceiling speakers offer great sound quality and value for the money. There is therefore no need to be concerned about it using up the entire budget if you’re attempting to stay to a strict budget when upgrading your home audio.
How do I protect my speakers from humidity?****
When not in use, keep your speakers indoors if at all possible. By doing this, you can shield them from dampness and the cold. Use a humidity control system: If you reside in a high-humidity environment, utilising a dehumidifier can assist in preventing moisture damage to your speakers.
How do I know if my ceiling speakers are working?****
Lightly contact the speaker wire to the battery using a battery and the other end of the wire. A positive sign is when you hear noise. Check to see whether everything is connected correctly before trying again with a different cable if you can’t hear anything.
How are ceiling speakers measured?****
Take your measurements in inches for the speaker using a ruler or a tape measure. The biggest portion of the cone should be facing up while your speaker is erect. Measure the distance between the mounting frame’s two edges at the speaker’s widest point. So that you won’t forget it later, note the measurement.
How do you power a ceiling speaker?****
No, ceiling speakers typically function as passive speakers, which means they lack internal amplifiers and are powered by speaker cables connected to an external amplifier. Each ceiling speaker is connected to the binding posts on the amplifier to do this.
Can I connect ceiling speakers to TV?****
Every TV will have some sort of connected audio output. It will most likely be a digital optical output presently. You can enjoy TV sound through your ceiling speaker system by connecting an analogue cable from your TV to the amplifier, plugging it in, and setting your TV to line output.
Do I need a subwoofer with ceiling speakers?****
Even if ceiling speakers are capable of producing all the bass and low-end frequencies, a subwoofer will be helpful in handling them. Additionally, it significantly improves the overall sound quality of your sound system.
Can you put ceiling speakers in the wall?****
It is possible to install in-ceiling speakers in walls, and they will sound quite similar to in-wall speakers. The size is the main distinction that you’ll see. Typically, in-wall speakers are bigger than in-ceiling speakers.
Where do you put ceiling speakers?****
The left and right speakers should be located to the right and left of where you will be sitting. Your in-ceiling speakers should be in the middle of the room and should also be orientated with your furniture or preferred listening area.
How do ceiling speakers connect to projector?****
Make sure your projector has an HDMI input and a line output for your streaming device, which is typically an Amazon Fire stick. All you need to do to enjoy your music through the ceiling speakers is run an audio cable between the projector and the amplifier.
How do Bluetooth ceiling speakers work?****
Bluetooth ceiling speakers are often wirelessly managed by a smartphone or other internet-connected device. The Bluetooth chip in the speaker will receive the content from the smartphone and play it through the speaker.
Can you hear ceiling speakers upstairs?****
People nearby are disturbed by the loud waves your speakers send throughout your house. Even upstairs, in-ceiling speakers can produce noise that will annoy anyone who isn’t interested in hearing every word of the movie you’re watching, especially if it’s past their bedtime.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>