seitron 038322 N.VO Combustion analyzer User Guide
- June 4, 2024
- seitron
Table of Contents
seitron 038322 N.VO Combustion analyzer User Guide
FEATURES
- Flue gas analysis
- Calculating stack heat loss and efficiency
- Ambient CO measurement
- Measuring differential pressure
- Draft measurement
- Simultaneous gas pressure measurement
- Altitude adjustment
- QR code display in order to download the data of the acquired measurements
- Ticket printing with the measurements data using built-in printer (if provided) or using the (optional) Bluetooth® printer
WARNING!
The magnets in the back of the instrument can damage credit cards, hard
driver, mechanical watches, pacemakers, defibrillators and other devices
proven sensitive to magnetic fields.
It is recommended to keep the instrument at a distance of at least 25cm away
from these devices.
Seitron respects the nature and the environment, therefore provides this quick
user guide of the NoVO analyzer.
You can download the PC software “SEITRON SMART ANALYSIS” and the complete
user and maintenance manual from our website
www.seitronamericas.com.
Respect your environment: think before printing the full manual on paper.
COMBUSTION ANALYSIS
| 1 | Configuration of the main analysis parameters. |
|---|---|
| 2 | **This button captures the snapshot of the sample measurement on the |
screen.
On the next page it will be possible to print or store the measurements
relating to the acquired sample.
3| LAST ANALYSIS: Date and time of the last analysis performed.
4| Stores the acquired sample in memory.
5| View the QR code relating to the analysis performed on the
display.
6| Start the printing of the performed analysis, according to the
settings made in the appropriate dedicated parameter on the home page.
7| Turns on / off the gas sampling pump.
If the gas sampling pump is off, the current measures refresh is
stopped.**
OPERATION
The suggested connections are used for the following measures:
- O2
- Gases: CO – NO – SO2 – CxHy – NO2 – H2 – CO2
- NH3
- Efficiency calculation
- Combustion analysis
- Draft
- Simultaneous measurement of gas pressure at the burner
POWER ON / POWER OFF
| INSTRUMENT CONDITION | ACTION | FUNCTION |
|---|---|---|
| OFF (powered off) | **Press and hold the key indicated by the arrow for a | |
| long time ( > 3sec.)** | *The instrument powers on and starts the automatic |
auto zero phase
ON (powered on)| Press and hold the key indicated by the arrow for a
long time ( > 3sec.)| The instrument turns off after completing the
cleaning cycle for the set time.**
*: At the first start, the instrument will guide the user step by step to the first configuration
MAIN MENUS
1| Performs the complete combustion analysis.
Moreover, it access the analysis configuration menu; the user can set
each single parameter of the instrument to perform the combustion analysis.
---|---
**2| Enters the Operator menu.
It is possible to select the name of the operator performing the
analysis, which will be printed on the analysis report.
3| Access the Measurements menu.**
The user accesses all the accessory measurements that the instrument can perform.
4| Access the configuration menu; the user can set the different
reference parameters of the instrument.
5| Accesses the Print menu.
6| Access the Archive menu.
The user displays the measurements stored in the memory.
Seitron Americas Inc.
4622 E. Street Rd. Trevose, PA 19053 – USA
Tel: 215-660-9777 Fax:
215-660-9770
service@seitronamericas.com –
www.seitronamericas.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>