Govee H61C3 RGBIC LED Neon Rope Lights for Desks User Guide
- June 10, 2024
- Govee
Table of Contents
Govee H61C3 RGBIC LED Neon Rope Lights for Desks
In The Box
- Neon Rope Light x1
- Internal Angle Cover x1
- End Cap x1
- Power Adapter x1
Installing Your Device
Before You Install
-
Step 1
Unpack the box and check for all included items. -
Step 2
Plug the neon rope light into power and check if it lights up.
Please follow the steps below if you want to fix the rope light to the desk edges snugly:
Step1
Power the rope light off. Compare the rope light to the desk edges and
determine the final length you want.
Step 2
Flip the light over and find the cuttable position that is closest to and does
not surpass the end. Carefully cut along the indicator line with scissors.
Step 3
Put the end cap onto the end of the rope light. Power on and check if it
lights up.
Please calibrate the length of the light when connecting it to the app.
Installation Steps
-
Step 1
Wipe the surface to make sure it’s clean and dry. -
Step 2
If your desk is L-shaped (or has an internal angle), please stick the internal angle cover to the corner first. Firmly press the internal angle cover for 1 Os to make sure it snugly sticks to the corner. -
Step 3
Peel off the protective film and carefully stick the rope light to the edges little by little. Firmly press the rope light for 1 Os, especially at the corner, to make sure it snugly sticks to the edges. -
Step 4
Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effects. -
Step 5
Power on the neon rope light and start using it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>