A D AD-8127 Multi Functional Compact Printer for Balances or Scales Instruction Manual
- June 9, 2024
- A D
Table of Contents
A D AD-8127 Multi-Functional Compact Printer for Balances or Scales
The printer support is used to install the AD-8127 to GX-L/GF-L series and GP series balances made by A&D Company, Limited.
- Applicable products: GX-L/GF-L series, GP series
Installing the printer and printer suppo
- Step 1 Remove two screws on the right side of the display case.
- Step 2 GX-L/GF-L series Remove the terminal cover for the RS-232C interface (D-Sub 9 pin). GP series Remove the option cover and the rubber cover.
- Step 3 Install the printer support besides the display unit using screws (M4x15W SEMS screws).
- Step 4 Place the printer (AD-8127) on the printer support while holding open the hook.
- Step5 GX-L/GF-L series Connect the RS-232C cable (AX-KO2741-100). Connect its RS-232C connector to the display unit and to the printer. GP series Connect the RS-232C cable (AX-KO2116-090). Connect its 25-pin connector to the display unit and its 9-pin connector to the printer.
- Step 6 Adjust the length of the remaining cable. Bundle up cables using cable clamps beside the display arm.
- Step7 AttachAC adaptor cables to the balance and printer, and bundle them using cable clamps.
Caution
If the RS-232C interface terminal cover is removed from GX-L/GF-Lseries, or if
the options cover and rubber cover are removed from GPseries, the balance and
printer will not be waterproof and dustproof.
Packing Content
| Component parts | Quantity |
|---|---|
| GP-16 Printer support for the AD-8127 | 1 |
| Cable clamp | 2 |
| M4 x 15W SEMS screws | 2 |
| Instruction manual (This document) | 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>