Aiwa AIR2 Prodigy Air2 TRUE WIRELESS EARBUDS User Guide
- June 5, 2024
- Aiwa
Table of Contents
Prodigy Air 2
TRUE WIRELESS EARBUDS
User Guide
Box contents
What’s in the box?
| AIWA Prodigy Air 2
True Wireless Earbuds
---|---
| Portable charging case
| Ear cushions – 6 pairs small, medium, and large (S, M, L)
| USB Type C charging cable
Getting started
Open the AIWA Prodigy Air 2 earbud Portable Charging Case 4 and gently pull the earbuds out of the magnetic casing with your fingers.
- Left Multi-function Button
- Earbud LED Lights / Microphone
- Right Multi-function Button
- Portable Charging Case
- Charging Case LED Light Indicators
- USB Type C Charging Case Port
Pairing your audio device
As soon as you remove both earbuds from the Portable Charging Case 4 they
will automatically turn on and the Earbud LED Lights 2 will start to
flash BLUE and RED.
You may hear ‘Power on, pairing’ and a ‘beep’ as confirmation the earbuds have
paired together.
One of the Earbud LED Lights 2 will continue to flash BLUE and RED. The
other earbud will flash BLUE intermittently.
Go to the Bluetooth settings on your audio device and select ‘AIWA Prodigy Air
2’ from the list.
Once paired successfully with your audio device you will hear ‘Connected’ and
both Earbud LED Lights 2 will flash BLUE.
You can now enjoy your music.
After this initial pairing, the earbuds will seamlessly reconnect to the last
used Bluetooth audio device it was paired with and will confirm by saying
‘Connected’.
Place both earbuds (or either one) back in the Portable Charging Case
4 to power them off.
If there is no Bluetooth connection after 3 minutes the earbuds will
automatically turn off and will confirm with ‘Power off’.
Note: If you see two ‘AIWA Prodigy Air 2’ appear on your Bluetooth menu list
please wait 4 seconds for the earbuds to connect to each other before pairing
with your audio device.
If there is still no connection simply ‘forget’ both earbuds in your Bluetooth
settings, place them back in the Portable Charging Case, and 4 start
again.
Activate voice assistant
Pair your Bluetooth audio device with your earbuds.
Press and hold either earbud Multi-function Buttons 1 or 2 for 2
seconds.
Listen for the familiar Voice Assistant ‘beep’ to confirm the connection with
Siri or Google Assistant.
You can now ask Google Assistant or Siri a question or state a command.
Google Assistant or Siri may not be available in all languages.
Staying charged
The Earbuds
The AIWA Prodigy Air 2 earbuds are charged using the Portable Charging Case
4.
While in the charging case each earbud LED Light 2 will be RED. When fully
charged the LED Lights 2 will turn OFF.
Secure the earbuds by closing the charging case lid.
The Portable Charging Case
Viewing the Charge Case LED Indicator Lights 5 will show you how much
charge you have remaining on the case.
The LED Indicator Lights 5 will power on for 6 seconds, each time the
earbuds are placed in or out of the charging case or when the case is being
charged.
If there are no WHITE LED Indicator Lights 5 on when you remove or insert
the earbuds then it is time to recharge the Portable Charging Case 4.
Always charge the case using a suitable power source such as a USB wall
charger, computer USB port, or power bank using the USB Type C charging cable
supplied.
Each LED charging indicator represents 25% charge
on the case.
The first LED Light indicator 5 will flash WHITE while charging and once
it reaches its 25% charge, it will then remain a solid WHITE as the next LED
indicator 5 light begins to flash and so on.
When all 4 LED indicators 5 are a solid WHITE and remain on then the
charging case is fully charged.
This should take approximately 1 – 2 hours.
Earbud control functions
First time pairing
Remove both earbuds from the Portable Charging Case.
They will automatically pair with each other and will confirm with ‘Power on,
pairing’. Go to the Bluetooth settings on your audio device to select Daiwa
Prodigy Air 2’ from the list.
Once paired successfully you will hear ‘Connected’.
Play / Pause / Answer / End Call
Short press either earbud Multi-function Buttons.
Activate voice assistant
Press and hold either earbud Multi-function Buttons for 2 seconds.
Listen for the familiar Voice Assist ‘beep’ then ask a question or state a
command.
Power on
Remove both earbuds from the Portable Charging Case and they will
automatically pair to each other and will confirm with ‘Connected’.
Power off
Place both earbuds (or either one) in the the Portable Charging Case and close
the lid.
Technical specifications
Bluetooth: version 5.0
Supported profiles: HSP, HFP, A2DP, AVRCP
Wireless range: 10m
Earbud capacity: 50mAH each side
Charge case capacity: 600mAH
Driver: 6mm dynamic driver, frequency response 20Hz – 20KHz +/- 3dB
Resistance: IPX5, water, and dust resistant
Weight – total 45g (earbuds 4.5g each)
Compatibility
Suitable for Bluetooth audio-supported smartphones, tablets, notebooks,
laptops, and computers.
Troubleshooting
Common solutions:
If you are experiencing problems with your earbuds:
- Power on the earbuds (see page 11).
- Check the status of the LED Lights (see page 7).
- Charge the battery (see page 8).
- Move your device closer to the earbuds and away from any obstructions or interference.
- Try connecting to another device.
See Q&A below for more queries and if you are unable to identify the problem then contact our customer service team online (see page 16).
Q. My earbuds won’t connect to each other / only one earbud is paired with
my phone?
A. Turn off the earbuds by placing them back into the charging case.
Take them out and before they connect to your phone, double press the Multi-
function Buttons on the back of one of the earbuds – this will force it to
look for the other earbud and connect to it.
Safety instructions
It’s important that you read this section completely, especially the ‘Warnings, Caution and Safe Usage’ instructions.
For your protection
Ensure the product is correctly connected using the manufacturer’s original
accessories included with the product.
Please keep the product out of reach from children and animals.
Do not listen to loud music for a long duration of time.
Adjust the volume to a comfortable level before listening.
Do not use the earbuds while operating machinery, including cars.
Do not use in areas where the use of hearing is required for safety.
Do not drop, short circuit, disassemble or continue to use this product and
its portable charging case if damaged.
We recommend
To refer all servicing to qualified persons. Servicing may be required when
the product has been damaged in any way, does not operate normally, or has
been dropped.
The operating temperature range for this product is 5º – 40º Celsius.
WARNING:
The earbuds, portable charging case, and the USB Type C cable connector are
not water-resistant and should not be exposed to rain, moisture, splashing, or
liquid spills.
This may cause excessive heat and may lead to fire damage or personal injury.
CAUTION:
This product contains a Lithium battery. Incorrect disposal of this battery
may result in an explosion.
Recycle
This product can be recycled.
Products bearing this symbol must NOT be thrown away with normal household
waste.
Take the product to a collection point designated for the recycling of
electronic devices.
Find out more about return and collection points through your local authority.
Guarantee
All of our products come with a 3-year warranty for peace of mind.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. Suppose this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off
and on. In that case, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Safe usage instructions
Do not crush, puncture or incinerate the charging case or the earbuds.
Only use a certified or the device manufacturer’s charging cable.
Contact us
For servicing or queries contact us on:
USA: Service@Aiwa.us.com
Europe: Info@Aiwa.eu.com
https://aiwa.eu.com/en/support/
APA2-UG01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>