Tabletop Media D B A Ziosk B25C1 Turbo Charger User Manual
- June 5, 2024
- Tabletop Media D B A Ziosk
Table of Contents
Tabletop Media D B A Ziosk B25C1 Turbo Charger
Product Overview
Operation Instruction
Step 1: Insert the power supply
Step 2: Open the power switch, the indicator of power lights red;
Step 3: Insert the device(B2522) into the machine, the charger indicator
lights red, the device enters charging stage;
Step 4: When the charger indicator lights green, charging finished.
Note: If the charger gets failure, the charger indicator will keep blinking.
Product Specification
- Work Environment: 0 45
- Power supply: 24V/ 6 A
- Input Port: DC
- Output Port : wireless charger
- Output power: 5W*6
- Output voltage: 5V
- Output current: 1A
- Physical Size: 220x145x315mm
- Net Weight: 4.5kg
- Quantity of simultaneous charging devices: 6 pcs
12404 Park Central Dr. Suite 350
Dallas, TX 75251
Email [email protected]
Support (877) 585.4822
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 15cm between the radiator & body.