PROJECT SOURCE BF1011 Flushmount Ceiling Fixture Instruction Manual
- June 9, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE BF1011 Flushmount Ceiling Fixture
Introduction
Thank you for purchasing this Project Source product. We’ve created these easy
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at 1-866-389–8827 , 8 a.m. – 8
p.m., EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. |
- Bulb is burned out.
- Faulty wire connection.
|
- Replace light bulb.
- Check wiring.
CARE AND MAINTENANCE
- • Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT?
- Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
- Note: Hardware shown actual size.
INSTALLATION OVERVIEW
-
Turn off the power and remove existing fixture.
-
Tighten the long mounting screws (B) 2 full turns into mounting holes in mounting strip (A) (to be fully tightened later).
-
Attach mounting strip(A) to outlet box using two short mounting screws (AA).
-
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
Attach wire connectors (BB). Tape wire connectors (BB) and wires together with electrical tape (not included).
-
Place ceiling plate (C) over outlet box. Allow heads of long mounting screws (B) to come out through the large ends of key holes. Twist ceiling plate (C) until heads of long mounting screws (B) slide into narrow end of key holes. Tighten long mounting screws (B) to secure ceiling plate (C).
-
Install light bulb (not included). Use 60-watt max. standard-base incandescent bulb or CFL/LED equivalent.
Twist the glass shade (D) on to ceiling plate (C) until it is firmly secured.
Note: When twisting the glass shade (D) onto ceiling plate (C), hold the glass shade (D) With two hands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>