PROJECT SOURCE JQY8115A-2 5-Light Chandelier Instruction Manual
- June 9, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE JQY8115A-2 5-Light Chandelier Instruction Manual
INTRODUCTION
Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. La |
- Bulb is burned out.
- Faulty wire connection.
|
- Replace light bulb./la
- Check wiring./Revise el.
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)/ HERRAMIENTAS NECESARIAS
FEELING CONFIDENT
- Visit lowes.com for more information./Para lowes.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
Adjust arms of fixture body (I) evenly.
Screw center column ( H ) onto fixture body (I).
Unscrew nut (D) from screw collar loop (C). Unscrew the threaded tube
(B) almost out of mounting strip (A) to get enough length to attach
the screw collar loop (C) and nut (D) on it to hold canopy (E) in
place.
Note: Do not install canopy (E) yet. Attach mounting strip (A) to
outlet box (not included) using outlet box screws (AA).
Unscrew the K/D rings (F) from chain (G). Adjust chain (G) to
desired length. Spread the chain link using standard pliers (not included) and
screw driver (not included) and twist chain link in opposite direction and
remove the extra chain lengths.
Note: Wrap soft cloth (not included) around pliers and screw driver to
protect the chain’s finish.
Weave electrical wires and ground wire up chain (G), through nut (D),
through canopy (E), through the screw collar loop (C), through
threaded tube (B), and into outlet box. Strip 3/4 in. of insulation from
wire end. Twist stripped ends of the white, ribbed or tinned wire without
writing from the fixture evenly against the white wire from the outlet box.
Connect the black, smooth or un-tinned wire with writing from the fixture to
the black wire from the outlet box in the same manner. Snip ends. Attach
copper wire to ground wire. Helpful hint: If the outlet box doesn’t have a
ground wire, you can attach the ground wire from the fixture directly to the
green screw preassembled on the mounting strip (A). Attach wire connectors
(BB) to ends. Tape wire connectors (BB) and wires together with electrical
tape (not included).
Tighten the nut (D) onto screw collar loop (C) to secure canopy
(E) in place.
Unscrew socket rings (L), remove the metal rings (K) from sockets on
fixture body (I). Attach glass shades (J) over the sockets. Place the
metal rings (K).
Install light bulb (not included). Use 60-watt max. standard-base incandescent
bulb or CFL/LED equivalent.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-866-389–8827 , 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
