PROJECT SOURCE JQY8991A Mini Pendant Instruction Manual

PROJECT SOURCE JQY8991A Mini Pendant Instruction Manual

Thank you for purchasing this Project Source product. We’ve created these easy-to follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-866-389–8827 , 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Use flashlight or alternate light source to light work area during installation.
• Assistance may be required to support fixture during installation.

CAUTION

• Connect fixture to supply wires rated for at least 167˚F.
• Workable for dimming circuits when using appropriate light bulbs with dimmable function.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20-30 minutes.

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit lowes.com for more information
  

PACKAGE CONTENTS

HARDWARE CONTENTS

• AA. x 2
  

• BB. x 3
  

• **CC. x 1

**

INSTALLATION OVERVIEW

Turn off the power and remove existing fixture.

1. Unscrew the cap nuts (C) from mounting screws (B). Separate the mounting strip (A) from canopy (D)
   

2. Feed fixture wires through I and J based on the desired hanging length. Pull cord taut, then attach rod assembly together.
   Note: To ensure proper assembly, make sure to route the wires through the ends of the rods with the threaded nipple first
   

3. Attach A to outlet box using AA. Temporarily place D through B determine amount of adjustment necessary B.
   

4. Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
   

5. Attach wire connectors (BB). Tape wire connectors (BB) and wires together with electrical tape (not included).
   

6. Lift D up over B, securing in place with previously removed C
   

7. Unscrew socket rings (G), remove the metal rings (F) from sockets on fixture body (E). Attach glass shades (H) over the sockets. Place the metal rings (F)
   Tighten socket rings (G) with socket ring fastener (CC) as needed.
   Note: Do not overtighten.
   

8. Install light bulb (not included). Use 60-watt max. standard-base incandescent bulb or CFL/LED equivalent.
   

TROUBLESHOOTING

1. Bulb is burned out.
2. Faulty wire connection

|

1. Replace light bulb
2. Check wiring.

CARE AND MAINTENANCE

• • Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.

WARRANTY

• The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>