anova TPB3003 Battery Pruning Scissors User Manual
- June 9, 2024
- ANOVA
Table of Contents
anova TPB3003 Battery Pruning Scissors
Millasur, SL.
Rúa Eduardo Pondal, nº 23 – Pol. Ind. Sigüeiro
15688 – Oroso – A Coruña 981 696465
www.millasur.com
ANOVA thanks you for choosing one of our products and guarantees you the
assistance and cooperation that has always distinguished our brand over time.
This machine is designed to last for many years and to be very useful if used
in accordance with the instructions contained in the user manual. We therefore
recommend that you read this instruction manual carefully and follow all our
recommendations.
For more information or questions, you can contact us through our web supports
such as www.anovama Maquinaria. com.
INFORMATION ABOUT THIS MANUAL
Please pay attention to the information provided in this manual and on the appliance for your safety and that of others.
- This manual contains instructions for use and maintenance.
- Take this manual with you when you go to work with the machine.
- Contents are correct at time of printing.
- The rights to make alterations are reserved at any time without affecting our legal responsibilities.
- This manual is considered an integral part of the product and should remain with it in the event of loan or resale.
- Ask your dealer for a new manual in case of loss or damage.
READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE
To ensure that your machine provides the best results, please read the usage and safety guidelines carefully before using it.
OTHER WARNINGS:
Incorrect use could cause damage to the machine or other objects. Adapting the
machine to new technical requirements could cause differences between the
content of this manual and the product purchased.
Read and follow all instructions in this manual. Failure to follow these
instructions could result in personal injury.
Items in the box
The tool includes the following components in the supplied carrying case.
- Electric pruning shears
- Lithium batteries x2
- Charger
- Tools and lubrication kit
Product description
General instructions
- Read the instructions in their entirety.
- Battery charging should only be done in protected indoor locations.
- As it is double insulated, no ground connection is necessary when handling this tool.
- It is distributed with a safety load transformer.
- If overheating occurs in the battery charge, the charging process will be automatically cut off.
- Do not dispose of chargers in your household garbage.
- Do not dispose of exhausted or damaged batteries in household waste.
Intended use
The pruning shears with the bead is a power tool and consists of a fixed
blade, a movable cutting blade, a lithium battery, adapted charger, connection
cable, tool bag and carrying case. The charging voltage ranges from 110V-240V
AC. The main application of this scissors is for the pruning of branches in
fruit trees, treatment and maintenance of orchard or fruit plants such as
vineyards or similar. This tool achieves great work efficiency and saves a lot
of time and effort compared to traditional manual pruning with mechanical
scissors. Its efficiency is established between 8 and 10 times higher than
manual pruning. The quality of the cut and its speed is also significantly
superior to thetraditional manual pruning.
Technical data
BASIC INFORMATION ABOUT PRUNING SCISSORS
Working voltage| DC 21V
Weight| 1.3 Kg (connection cable not included)
Battery| Lithium Ion 21V 2Ah
Charging voltage| AC 110V – 240V
Battery charging time| 1.5 – 2 h
Working time| 2 – 3 h (discontinuous work)
CUTTING RANGES
Cut diameter| 40 mm
Working temperatures| -10ºC -65ºC
Read all the safety instructions carefully. You may get electric shock, fire,
or burns if you don’t follow the safety instructions.
Do not use or directly expose pruning shears to rain.
While working with the pruning shears, do not close or manipulate the cutting
blades with your hands. Take special care to bring any part of your body close
to sharp moving parts.
Identification of parts
- Cutting blade
- Cutting blade support
- Gear
- Trigger actuation
- Lithium battery
- Battery charger
- On / off switch
Use and maintenance
Commissioning
- Remove the machine from the packaging. Install the lithium battery, press and hold the power switch for three seconds, and then release it. You should hear the sound of two beeps; this means that the battery is normally charged.
- Continuously and quickly press the trigger twice to automatically open the blade.
- Before starting work, press the trigger to operate the blade several times and listen for unusual noises or too fast or too slow working speed. If everything is normal, you can start working.
- Off: Press the trigger and release it after hearing a beep three times. The blade will close automatically.
Tips for use
Note:
- The machine may overheat after a long time of use, this is a normal phenomenon. Let the machine cool down for a while and you can use it again when the temperature drops.
- After completing the pruning work, at the end of the season, or when you replace the blade, and need to remove the blade, add lubricating oil for the maintenance of the blade and the cutting system.
- While pruning, start pruning about 8mm from the bud; the maximum cutting diameter is 30mm.
- Prune in the part furthest from the bud to avoid loss of sap in the plant.
- Do not prune the branches too far away from the tree, as it will reduce the health of the plant. Leave a small section of the branch to avoid stress on the plant.
- While working with the scissors, keep your hands away from the cutting blades and equip suitable gloves and protective equipment.
- Remove diseased shoots and remove dry branches on the plant.
- When pruning a tree, prune each branch separately and do not cut multiple branches at once.
Battery charging
The battery in a new machine is not fully charged. Before charging, insert the
battery into the charger and insert the charger plug into the outlet. As shown
in the image to the right, the red indicator light shows that the battery is
charging; the green indicator light indicates that the battery is charged. Use
the scissors after full battery charges.
Special attention
- Before charging, turn off the switch; During charging, it is normal to have a slightly warm charger and batteries.
- If the batteries are not used for a long time, they should be recharged every 3 months to increase the service life;
- New batteries or batteries not used for a long time will reach the maximum capacity after 5 times of charge-discharge cycles;
- Do not charge the batteries repeatedly after several minutes of operation, this may reduce the working time and the effectiveness of the batteries
- Do not use damaged batteries or disassemble the charger or batteries.
- Batteries can explode in fire. Never burn the batteries.
- Do not charge the batteries in an outdoor or humid environment.
- With the gradual decrease of the electric quantity of the battery, it is normal to reduce the capacity of the cutting diameter.
- During the charging process, do not use electric pruning shears.
Sharpening the blade
- Turn the scissor off with the blade open and remove the battery.2. Both sides of the movable knife are sharpened using sharpening stone forming the section angle with the knife; 3. After sharpening the blade, clean it, connect and turn on scissors, test that it moves properly, and close the blade for future work.
Blade replacement
- To ensure your safety, remove the battery before handling the blade.2. Step by step, as shown below, replace the blade. 3. After replacement, clean the blade, turn on the scissors and test to see that everything is correct.
1. Remove the screws with a screwdriver and open the cover.
2. Remove the screws from the blade nut retainer (this step is important)
3. Remove the blade nut
4. Remove the pin and remove the movable knife
5. Remove the fixed knife.
6. When replacing blades, lubricating oil should be added between blades
7. Replace blade8. Insert nut 9. Install the lock nut Support blade and movable blade can be replaced independently; As a replacement, don’t worry about too small a blade opening; After recovering the electricity from the scissor, the normal opening size will automatically recover.Maintenance
Scissor maintenance
- Do not cut branches outside the cutting range; do not cut non-plant materials, such as metals and stones, etc. do not use clamps or the like to hold the scissors; Always replace the cutting blade, if it is worn or damaged.
- Keep the cutting equipment clean, wipe the scissors, batteries, and charger with a clean cloth (do not use corrosive detergents!) And a soft brush or dry cloth to remove dust from the upper scissors.
- Do not immerse the scissors, batteries, and charger in water or other liquids;
- Use the equipment correctly; stop using it when there is damage to the scissors, batteries and / or chargers.
- If the switch cannot turn the scissors on or off, do not use the scissors. It will be dangerous to control the scissor without the switch properly. Replace and repair the switch in this case always before using the scissors again.
- Make sure the switch keeps the shears off when replacing accessories or storing the pruning shears. Such a preventive measure will reduce the risk of accidentally activating the scissors and injuring the user.
- Turn off the pruning shears if you are not going to use it and store it out of the reach of children. It is dangerous to allow inexperienced persons and untrained users to operate the pruning shears. 8. When using pruning shears, respect the tool and the specific use for which it was designed. Consider the work environment and the tasks to be performed; You can cause risk and damage by using pruning shears that are not working properly. 9. After use, remove the dirt from the movable knife and supporting knife, add lubricating oil or motor oil on the contact part, keep the knife in good sharpening condition to extend its service life and to upcoming uses.
Battery maintenance
- Use the battery as the only valid power source for your electric pruning shears. Do not use the battery as a power source for any other power tool not listed.
- Do not charge the battery in temperatures below 0ºC or above 45ºC; this can damage the battery and charger.
- Make sure the battery switch is off before connecting the power cord; if it is open it can create a problem when connecting to the scissors.
- Use only the charger assigned by the manufacturer to charge the battery; You can cause a battery fire or explosion if you use chargers with inadequate power.
- When the battery is not in use, be sure to keep it away from metal objects such as paper clips, coins, keys, screws, etc. that can shorten the battery charge or cause unintentional discharge or fire hazard.
- Do not disassemble or rebuild the battery.
- Do not use damaged or short-circuited batteries.
- Do not place the battery on hot surfaces or sources of heat; do not expose it directly to the sun.
- Do not place the battery near fire or in contact with water.
- Do not charge the battery near fire or in direct sunlight.
- Do not drive nails or other objects into the battery; do not hit it with hammers or trample on it, and do not throw the battery on the ground hastily.
- Do not use damaged or deformed batteries.
- Do not solder batteries directly.
- Do not charge the batteries in reverse; do not use them in an anti-polar way or discharge them excessively.
- Do not connect the battery to recharging sockets or car cigarette lighter sockets.
- Do not use the battery in unsuitable or approved equipment.
- Do not connect several batteries in the network.
- Do not connect the battery with other lithium batteries directly.
- Do not put the battery in containers with high temperature or high pressure, such as microwave, etc.
- Do not use batteries that are leaking.
- Do not allow children access to the battery.
- Do not use or place the battery directly under the influence of the sun (or in cars under direct sunlight); It may cause overheating and cause a fire in the battery; or shorten its life cycle without further ado.
- Do not use the battery in places with the influence of static energy (+ 64V)
- When using the battery for the first time, do not continue to use it and return it to your sales center if: there is some kind of corrosion, unpleasant odors or some other strange phenomenon occurs.
- If there is any leakage of the internal battery fluid on your skin or clothing, wash it off immediately with plenty of water.
- If the scissors are to be stored for a long time, fully charge the battery before storing.
Safety instructions
ATTENTION- Please read these instructions carefully to avoid damage such as electric shock, fire, or other serious damage.
- Location:
- Work in clean, uncluttered areas. Work in bright areas. Dark or cluttered workplaces can cause accidents.
- Do not use the scissors in places with risk of fire, explosives or humid.
- Avoid distractions at work and invite any children or passersby to leave the work area to avoid being entertained.
- Electricity:
- The electrical plug of the battery and that of the scissors should be easily coupled; do not connect any other plug in its place.
- Do not expose the scissors or battery to rain or very humid environment. Water or other liquids can increase the risk of electric shock or damage to other electrical appliances.
- Do not force the connection cables; do not use the power cords as ropes or points from which to drag the tool or hold it directly. Do not pull on the cord to unplug the connections. Keep the scissors and its cables away from heat sources, oils, sharp edges, or moving parts. Do not use the charger if the power cord or plug is damaged.
- Personal:
- Stay alert: while using the scissors, be aware of the elements that may exist in your task area; do not use the scissors if you are tired, or under the influence of medications or drugs that affect your abilities. Any distraction can seriously harm you.
- Always wear protective gear and wear protective glasses, a dust mask, anti-slip footwear and a safety helmet. Use each item under its proper conditions of use to reduce the risk of accidents.
- Before connecting the pruning shears, remove any tools you may have used for adjustment or maintenance. Avoid contact of the scissors with parts that could cause accidents.
- While you are working, do not overstretch your arms and work in a stable and comfortable position; do not handle the lighted scissors directly with your hands. Make sure that the work area does not have other materials that could be damaged while pruning, such as power cables, wires, etc .; and maintain a balanced position to ensure a good reaction in the event of an accident or fall.
- Dress appropriately for the job to be performed: do not wear clothing that is too loose or at risk of being caught in the scissors or other trees for your discomfort or insecurity; keep hair, clothing, and sleeves away from the scissor cutting area.
- general:
- When there are no branches to be cut by the scissors, release the trigger and hold the scissors in its open position.
- When the branches are very hard, release the trigger and the blade will return to the open position to remove and attempt the cut in another area.
- If the battery does not charge normally, first check whether the charger is appropriate for the battery, and then check whether the charging voltage is appropriate with that of the battery.
- If there is any electrical or mechanical damage, turn off the battery immediately.
- If the battery is leaking; do not touch the liquid under any circumstances; if you come into contact with the liquid, wash it off immediately with plenty of water; If the liquid gets into your eyes, see a doctor immediately and wash it off with plenty of water
Recycling and the environment
If your machine needs to be replaced after prolonged use, do not put it in the household garbage, dispose of it in an environmentally safe way and in accordance with the legal provisions in this regard in your locality.
Warranty
- This product is guaranteed in accordance with legal regulations for a period of 24 months from the date of purchase by the first user.
- This warranty covers all material or production failures, does not include defects in normal wear parts, such as bearings, brushes, cables, plugs or other accessories such as drills, bits, saw blades, etc., damage or defects resulting from abuse, accidents or alterations in the product; nor the costs of transport to technical service, if applicable. We reserve the right to reject any claim where the purchase cannot be verified or when it is clear that the product was not properly maintained. (Clean ventilation slots, regularly maintained carbon brushes, sharpening of cutting blades, state of cleanliness and lubrication, etc.)
- Your purchase invoice must be kept as proof of the purchase date and application of the corresponding guarantee.
- Your tool must be returned without disassembling to your dealer in an acceptable and clean condition, in its original molded box, if applicable to the unit, accompanied by your proof of purchase for any type of claim or incident.
CE certificate
DISTRIBUTION COMPANY
MILLASUR, SL
RUA EDUARDO PONDAL, Nº 23 PISIGÜEIRO
15688 OROSO – A CORUÑA
SPAIN
CE DECLARATION OF CONFORMITY
In compliance with the different CE directives, it is hereby confirmed that,
due to its design and construction, and according to the CE mark printed by
the manufacturer on it, the machine identified in this document complies with
the relevant and fundamental requirements in health and safety. of the
aforementioned CE directives. This declaration validates the product to
display the CE symbol.
In the event that the machine is modified and this modification is not
approved by the manufacturer and communicated to the distributor, this
declaration will lose its value and validity.
Machine name: BATTERY PRUNING SCISSOR
Model: TPB3003
Recognized and approved standard to which it conforms:
Directive 2006/42 / CE / Directive 2014/30 / EU / Directive 2014/35 / EU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>