WASSERSTEIN Solar Panel for Google Nest Cam User Manual

WASSERSTEIN Solar Panel for Google Nest Cam

Before installing this accessory, please first set up the Google Nest Cam (battery) using the in-box cable provided with the camera. This will ensure that you have the latest firmware.

In the Box

• 1 x solar panel and 360° mounting bracket
• 3 x screws for wall mount
• 3 x wall anchors for wall mount
• 1 x user manual

Installation

You can mount the solar panel up to 13.1 ft / 4 m (max cable length) away from your camera. For optimal performance, install your solar panel at a location where it will receive a few hours of direct sunlight daily.

Mounting the Solar Panel
You can mount the solar panel directly onto a wooden surface using the included screws. If you are mounting it onto a brick, concrete, or stucco, mark the holes first using the bracket, drill a hole for the anchors. You can then insert the anchors and subsequently use the screws to secure the mount. The drill bit size is 1/8 inches.

Slide the solar panel onto the mount until it clicks.

Note:
The 360-degree rotatable mount allows you to adjust the solar panel in the best position to absorb sunlight.

Connecting Your Camera

Connect the Wasserstein Solar Panel to your Nest Cam with the magnetic charging cable.
Note:
Make sure that the connector is in the right direction as shown in the picture.

Checking your Battery Charging Status on your Nest App.

The Solar Panel will keep Nest Cam Charged at around 70%. If there is not enough sunlight and the battery drains below 20%, it will be displayed in the Google Home app.
The Solar panel will stop charging the Nest Cam once it reaches 70% to prolong its battery life.

FAQ

• Solar panel and Nest Cam are connected – Why does the battery level drop?

  • The solar panel has to be exposed to direct sunlight.
  • Depending on sunlight exposure, it may take a while to see an increase in your battery percentage.
    Note: In most situations, the solar panel should provide enough power to keep Nest Cam charged. The battery level will only be displayed if the camera’s battery drops below 20% or if there is not enough sunlight.

• How much can I expect the solar panel to charge my Nest Cam on a full sun day?

  • A 2%-3% increase after 5 hours in the sun is fairly normal.
  • Note: Fully charge your camera before connecting the solar panel

• Does the solar panel work on cloudy days?
  Yes, it does work on cloudy days, but the output will be reduced.

Get More Support

Scan the QR code below or, email us at contact@wasserstein- home.com

Safety Information

• Do not open or break the solar panel.
• Keep the solar panel away from any heat source or fire.
• Make sure that the magnetic charging cable is properly attached to the camera.
• Please avoid stretching the magnetic charging cable to its fullest extent.

This product has been certified by Wasserstein to meet Google’s compatibility standards. Google is not responsible for the operation of this product or its compliance with any applicable safety or other requirements.

Learn more at g.co/madeforgoogle.

Google’s “made for” badge, Google Nest Cam, and related marks are trademarks of Google LLC.

Google Nest Cam (battery) is not included. Wasserstein is not affiliated with Google LLC. Wasserstein is a trademark of Dropcases Ltd. Google Nest Cam is a trademark of Google LLC.

For more information, please visit: www.wasserstein-home.com Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>